peabody124
30b122afa9
GCS/Config: Edit tab stop order to be more intuitive
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2328 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-04 17:30:09 +00:00
edouard
4be34fdb0f
Modified all channel naming internally to use Channel 1 to Channel 8, instead of the previous convention of Channel0 to Channel7.
...
BEWARE: I have not flown my quad with this code, so please be careful, test, and report!
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2234 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-13 23:54:30 +00:00
edouard
0fe666b7a2
Config gadget: Forward-pointing arrow on multirotor shapes in case those were ambiguous, and more tooltips for the servo config tabs.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2201 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-07 21:40:54 +00:00
edouard
f0bc081ae9
Disable actuator combo box on the config dialog, because of the risk of creating an inconsistent mixer. Letting the user change there was misleading.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2194 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-12-05 17:45:32 +00:00
edouard
c2664a7843
OP-138 Various updates to config gadget: new quad shapes in the artwork, new tooltips, and start of the feed forward testing interface, with foolproof user safety (tm) built it...
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1950 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-12 21:41:06 +00:00
edouard
1824440c8e
OP-190 Added support for the flightmode switch settings in the config gadget. Let me know if you like the UI!
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1945 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-10-11 19:03:27 +00:00
edouard
4b3096dd57
OP-38 Ground / Config Gadget: implemented channel reversal for output channels.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1564 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-08 21:31:09 +00:00
edouard
e3108c36ad
OP-38 All sliders now work on the servo output calibration. Beware: will only work if your RC receiver is connected, otherwise the OP board goes into failsafe and does not let you touch the actual servo outputs.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1394 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-23 22:02:49 +00:00
edouard
dc2928ae99
OP-38 Config gadget: you can now test your servo outputs by checking the "Test Outputs" checkbox and moving the sliders. You will need up to date
...
flight firmware for this to work.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1335 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-19 11:48:16 +00:00
edouard
587e10fc43
OP-38 Separated airframe type from RC output, added telemetry settings. Larger icons on left side menu.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1317 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-18 09:38:25 +00:00
edouard
732b65cdaa
OP-38 Output settings now done, to be validated on real HW and tested by more users. "Test" checkboxes not active yet.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1233 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-07 22:32:57 +00:00
edouard
516815807c
OP-38 Progress on the servo output settings: not functional yet, but the GUI layout is done. Comments welcome, let me know if this is not clear please...
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1228 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-07 08:56:03 +00:00
edouard
f1faea0483
OP-38 Config gadget: channel assignement is now read/saved. Ch Invert not implemented yet.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1206 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-04 14:50:44 +00:00
edouard
737abfcb34
OP-38 Working version of the RC Receiver calibration tab: lets you calibrate the Min/Max/Neutral values of the OP receiver inputs in just a few seconds. Binding of channel to action is not done yet, but save to SD works.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1186 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-30 06:43:50 +00:00
edouard
626ba1f822
OP-38 Start of work on the configuration gadget: proof of concept of how to calibrate the RC Receiver by
...
simply moving the RC Transmitter sticks. Does not actually save the settings yet, meant as a PoC for comments.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1177 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-29 16:42:29 +00:00
