Vladimir Zidar
64bf884f96
LP-391 Changed PIOS_COM_Init buffer len parameters to uint16_t type. Fixed simposix pios_board.c GPSPORT_GPS init incorrectly passing -1 to PIOS_Board_configure_com() which was on some platforms converted to large unsigned value.
2016-11-26 21:51:29 +01:00
Vladimir Zidar
107aa2170e
LP-391 This fixes issue with negative size (-1) passing from PIOS_Board_configure_com() to PIOS_COM_Init().
2016-08-30 02:03:10 +02:00
Laurent Lalanne
34f55ffbe2
LP-298 Use PIOS_Board_configure_ibus() for all boards - Missing define for RevoNano
2016-08-05 20:49:34 +02:00
Laurent Lalanne
5895468f08
LP-298 Port Ibus Input driver from dRonin - Not tested
2016-08-03 19:09:05 +02:00
Vladimir Zidar
873950b071
LP-364 Added MAVLink support to remaining target boards: sparky2, revonano and coptercontrol.
2016-07-24 22:26:29 +02:00
Laurent Lalanne
2138516dfe
LP-72 Various typo fixes - Set PPM input as default
2016-05-25 13:51:41 +02:00
Vladimir Zidar
e12967e45a
Merge remote-tracking branch 'upstream/next' into LP-291_port_UAVOMSPBridge_from_dRonin
2016-05-15 22:16:47 +02:00
Laurent Lalanne
214ae849a2
LP-233 Add MultiShot 5 - 25µs pulses
2016-05-02 20:24:03 +02:00
Laurent Lalanne
32a6de6b79
LP-233 Support OneShot42
2016-05-02 20:24:03 +02:00
Vladimir Zidar
f04d44de30
LP-291 Added MSP support to all boards (revolution, revonano, revoproto, discoveryf4bare and coptercontrol)
2016-04-22 03:30:38 +02:00
Vladimir Zidar
b1aa5c1c59
Uncrustified
2016-02-03 23:13:19 +01:00
Vladimir Zidar
eff5ab377e
This commit fixes debug console rx_buffer assertion. Debug console is tx only, but PIOS_Board_configure_com() was not pepared to handle such case.
...
Additionally, debug console on flexi port was incorrectly using pios_usart_main_cfg.
2016-02-02 23:14:09 +01:00
Fredrik Arvidsson
c06fb0249f
LP-104 LP-196 Uncrustify and some other formatting issues fixed.
2016-01-10 10:12:54 +01:00
Fredrik Arvidsson
d32cc0e7fb
Merge branch 'thread/LP-104_LP-196_HoTT_and_Ex.Bus_Support_15.09' into thread/LP-104_LP-196_HoTT_and_Ex.Bus_Support
2016-01-09 19:18:48 +01:00
Fredrik Arvidsson
02c981388a
Merge branch 'thread/LP-196_Jeti_Ex_Bus_15.09' into thread/LP-104_LP-196_HoTT_and_Ex.Bus_Support_15.09
...
# Conflicts:
# flight/targets/boards/coptercontrol/board_hw_defs.c
# flight/targets/boards/coptercontrol/firmware/pios_board.c
# flight/targets/boards/revolution/board_hw_defs.c
# flight/targets/boards/revolution/firmware/inc/pios_config.h
# flight/targets/boards/revolution/firmware/pios_board.c
# flight/targets/boards/revonano/firmware/inc/pios_config.h
# flight/targets/boards/revonano/firmware/pios_board.c
# shared/uavobjectdefinition/hwsettings.xml
# shared/uavobjectdefinition/manualcontrolsettings.xml
# shared/uavobjectdefinition/receiveractivity.xml
2016-01-09 16:59:24 +01:00
Fredrik Arvidsson
c48c46b8ef
LP-196 Cleaned up some configuration. Ex.Bus only available on Flexiport.
2016-01-09 16:07:13 +01:00
Fredrik Arvidsson
6a3a822c87
LP-104 Cleaned up configuration. Only Allow HoTT on flexi port.
2016-01-09 15:50:52 +01:00
Fredrik Arvidsson
4b8582a3ad
LP-196 Added support for targets Revolution and RevoNano.
2015-12-26 13:08:07 +01:00
Fredrik Arvidsson
879c8fc9b9
LP-104 Correction of @author tag when multiple authors are present.
2015-12-22 18:00:49 +01:00
Fredrik Arvidsson
3d56c4f384
LP-104 Updated copyright headers with LibrePilot
2015-12-22 09:23:57 +01:00
Fredrik Arvidsson
68ff383637
LP-104 Adding HoTT support for Revolution and Revo Nano.
2015-12-20 23:45:37 +01:00
Cliff Geerdes
e0a805518f
LP-73 uncrustify
2015-10-25 23:59:52 -04:00
Cliff Geerdes
04e3bbd4ce
LP-73 fix fw_osd build poke wdg in startup
2015-10-24 12:23:13 -04:00
Cliff Geerdes
7de55812dd
LP-73 changes for pull request comments
2015-10-24 12:09:22 -04:00
Cliff Geerdes
d9b7a0bb00
LP-73 port extmag to all other boards
2015-10-24 12:09:21 -04:00
samguns
8551048354
REVONANO 1. Sanity check for PWMSync & OneShot while using PWM receiver. 2. Remove CC in hwsettings.xml
2015-05-26 15:01:01 +08:00
abeck70
c0c5cd3d16
OP-1464 uncrustify
2015-05-22 18:36:38 +10:00
m_thread
2ce0d5f378
OP-1837 Added SRXL support to nano.
2015-05-21 09:11:55 +02:00
Alessio Morale
d521ce6023
REVONANO - Add support for WS2811 led on servo output 1.
...
To free timer1, a unused timer (9) is assigned on the fly to servo out 1 to leave pin mappings unchanged. A better approach should be implemented Later (jira 1035)
2015-05-18 21:30:05 +02:00
Alessio Morale
3fd75273f5
Cleanup/uncrustify
2015-05-18 21:30:04 +02:00
Alessio Morale
3152ebcaf0
OP-1828 - add support for Revonano
2015-05-18 21:30:03 +02:00
Alessio Morale
5ca6e43070
REVONANO - Fix erase settings
2015-05-18 21:30:02 +02:00
Alessio Morale
2497b3d605
REVONANO - some cleanup
2015-05-18 21:30:02 +02:00
Alessio Morale
e4dc6b0b64
OP-1658 - baro support for revonano
2015-05-18 21:30:01 +02:00
Alessio Morale
94d30f7ad2
OP-1658 - Add RevoNano support
2015-05-18 21:30:00 +02:00
Stefan Karlsson
a3fc54ac0b
REVONANO - Fix Baro initialization bug
...
The I2C SCLK pin (A8) was being changed by code used to support battery voltage sensing on the Revo. This code was run after PIOS_I2C_Init but before PIOS_MS5611_Init, causing a BUSY state on the I2C bus before the Barometer initialization code was run.
2015-05-18 21:29:59 +02:00
Laurent Lalanne
57845a7cf9
REVONANO - Disable WDG - Add PathPlanner and PathFollower modules - Fix Tx/Rx buffers for GPS
2015-05-18 21:29:59 +02:00
Laurent Lalanne
aff4951d02
REVONANO Remove hardcoded Flexiport with telemetry
2015-05-18 21:29:58 +02:00
Stefan Karlsson
21b485aa3f
REVONANO - Fix timers for PPM
2015-05-18 21:29:58 +02:00
Alessio Morale
3651ac61a3
REVONANO - Change sensors rate to 333Hz
2015-05-18 21:29:57 +02:00
Stefan Karlsson
efb6855f6f
REVONANO - Various temp fixes debug code to get nano to read from the flash. Code has been added to make the execution of systemTask wait until initTask has completed.
...
Conflicts:
flight/pios/common/pios_flashfs_objlist.c
2015-05-18 21:29:56 +02:00
Stefan Karlsson
8c8abc3cb5
REVONANO - Increase fast_prescaler for the MPU so that it doesn't consume all CPU
2015-05-18 21:29:56 +02:00
Alessio Morale
210b75fcb9
REVONANO - Fix MPU Prescalers
2015-05-18 21:29:55 +02:00
Alessio Morale
4a7d81ed01
REVONANO - Fix gyro spi config and include MPU9250 support
2015-05-18 21:29:54 +02:00
Alessio Morale
5c13551a1a
REVONANO - Add support for eeprom and objlist fs
2015-05-18 18:55:25 +02:00
Alessio Morale
8a54414d70
REVONANO - Fix and cleanup hw configurations, Baro working at this stage
2015-05-18 18:54:52 +02:00
Alessio Morale
690e04f4f0
REVONANO - Initial board support
2015-05-18 18:52:09 +02:00
