Corvus Corax
|
7e421b99a4
|
uncrustificationization
|
2015-01-25 15:48:45 +01:00 |
|
Laurent Lalanne
|
68f9763e73
|
OP-1652 Typo FlexiIOPin
|
2015-01-21 14:32:21 +01:00 |
|
Laurent Lalanne
|
bc178b8a95
|
OP-1652 WS281x pins : Update flight side for revo
|
2015-01-21 14:12:36 +01:00 |
|
abeck70
|
2b6d79467c
|
gpsassist:code review comments
1. Defines
2. Name of adjustments changed to vtolSelfTuningStats
|
2015-01-09 07:51:37 +11:00 |
|
abeck70
|
b1c94e83d0
|
gpsassist: One commit new branch
Collapsed into one branch for a new code review. Some unnecssary committed files removed.
|
2015-01-08 13:20:47 +11:00 |
|
Mathieu Rondonneau
|
6844f8351d
|
run uncrustify.
|
2014-12-04 20:17:29 -08:00 |
|
Mathieu Rondonneau
|
4b00f6039d
|
OP-1626: Allow binding to happen within satellite binding window.
- This is working for satellite 22ms (genuines and clones).
- This change only affect revo.
|
2014-11-29 19:59:18 -08:00 |
|
Alessio Morale
|
99d73426b8
|
Uncrustify
|
2014-11-27 12:05:59 +01:00 |
|
Fredrik Larsson
|
1687ef7e8f
|
Merge remote-tracking branch 'origin/rel-14.10' into next
|
2014-11-23 12:15:32 +11:00 |
|
Fredrik Larsson
|
cd94410468
|
DSM Protocol removed flight firmware
|
2014-11-22 08:32:00 +11:00 |
|
Laurent Lalanne
|
4fdcceda65
|
Merge branch 'laurent/OP-1601_CC_Ram' into next
|
2014-11-17 03:30:45 +01:00 |
|
Laurent Lalanne
|
9e0ede3386
|
OP-1601 barosensor.c and airspeedstate.c removed from Makefile
|
2014-11-15 22:17:08 +01:00 |
|
Fredrik Larsson
|
e7d183b5e6
|
Merge branch 'rel-14.10' into next
|
2014-11-07 14:58:41 +11:00 |
|
Alessio Morale
|
e04825e7b7
|
OP-1588 - Remove *relay flight modes
|
2014-11-01 16:11:11 +01:00 |
|
Alessio Morale
|
71d30a7521
|
OP-1584 - reduce telemetry queue size
|
2014-10-31 20:39:52 +01:00 |
|
Alessio Morale
|
c0ca20f661
|
OP-1584 - Remove auxmagsupport from cc3d for now as it is unused, remove other stuffs from ubx when GPS_MINIMAL is selected
|
2014-10-31 19:56:38 +01:00 |
|
Alex Beck
|
e2b38d0d7d
|
Yaffs or dosfs now conditional linkage for simposix yaffs testing
|
2014-10-28 08:48:38 +11:00 |
|
abeck70
|
942945850b
|
Merge branch 'next' into abeck/OP_1503v3-yaffs
|
2014-10-23 21:25:54 +11:00 |
|
Alessio Morale
|
a9f35e2afe
|
Merge branch 'amorale/OP-1535_mpu_overhaul' into next
|
2014-10-16 00:51:02 +02:00 |
|
abeck70
|
de68e0179f
|
First round review comments
|
2014-10-14 17:17:59 +11:00 |
|
Alessio Morale
|
5d074063d1
|
OP-1535 - Add board specific sensor update rate constant
|
2014-10-14 05:38:57 +02:00 |
|
Alessio Morale
|
f2fc5f5616
|
OP-1513 - Fix time constants, set initial temperature as first sample value
|
2014-10-11 23:54:21 +02:00 |
|
Alessio Morale
|
4a8cfe3f86
|
OP-1535 - Refactor MPU6k driver to allow direct and fifo access based on configuration
|
2014-10-10 22:33:50 +02:00 |
|
Alessio Morale
|
28274cdb6b
|
OP-1535 - Fixes CC3D sensor SPI configuration
|
2014-10-10 22:33:49 +02:00 |
|
Alessio Morale
|
9350bd65d9
|
OP-1535 - change sensor rate to 1KHz with software downsample to 500Hz
Allow per board SPI prescaler settings
|
2014-10-10 22:33:49 +02:00 |
|
abeck70
|
948d6546af
|
yaffs simposix ready for review
All yaffs changes for library inclusion, arm compilation, and simposix integration.
|
2014-10-10 13:21:06 +11:00 |
|
Stefan Karlsson
|
aaebc25eff
|
OP-1528 Fix Telemetry-only over the Flexi-IO port
|
2014-10-08 00:31:31 +02:00 |
|
Stefan Karlsson
|
004f5a32a9
|
OP-1528 Enable Telemetry on the Flexi-IO (receiver) port on the Revo
|
2014-10-06 21:28:09 +02:00 |
|
Alessio Morale
|
8e2e534c60
|
Uncrustify/clean commented code
|
2014-10-03 11:41:26 +02:00 |
|
Alessio Morale
|
e553014596
|
Merge branch 'amorale/OP-1476_1477_1275_GPSV9_pios_firmware_bootloader' into next
|
2014-10-03 00:37:55 +02:00 |
|
Alessio Morale
|
9cfd55d006
|
Merge branch 'amorale/OP-1507_gps_module_cpu_optimization' into next
|
2014-10-03 00:37:39 +02:00 |
|
Alessio Morale
|
ae9f30c729
|
OP-1477 - Fix mag exti config, set correct rate, set correct SPI speed for hmc5x83. Note: GPIO is disabled as it seems there is some issues with Exti on PB0
|
2014-10-01 02:07:46 +02:00 |
|
Alessio Morale
|
9e0596c2c5
|
Merge remote-tracking branch 'origin/amorale/OP-1379_ext_led_notification_module_new' into next
Conflicts:
Makefile
flight/targets/boards/discoveryf4bare/firmware/Makefile
flight/targets/boards/revolution/firmware/Makefile
|
2014-09-29 21:26:31 +02:00 |
|
Alessio Morale
|
d0b37bab28
|
OP-1507 - Handles GPS data a chunk at time instead of a single byte at time.
|
2014-09-27 00:17:00 +02:00 |
|
Fredrik Larsson
|
5bbd6724d6
|
Merge remote-tracking branch 'origin/skarlsso/OP-1493_discoveryf4bare_support_in_gcs' into next
|
2014-09-23 21:11:15 +10:00 |
|
Alessio Morale
|
7a9a0868c9
|
OP-1275 - split persistence handling out of UavobjectManager. stubs are used if target deos not support persistency
|
2014-09-20 21:02:51 +02:00 |
|
Alessio Morale
|
2885a20acb
|
OP-1477 - add watchdog support
|
2014-09-16 22:51:28 +02:00 |
|
Alessio Morale
|
2f50dbeee5
|
OP-1477 - Split and cleanup gpssys module
|
2014-09-16 22:40:55 +02:00 |
|
Alessio Morale
|
1fa2bfddc6
|
OP-1477 - Add GPS System Module
|
2014-09-16 22:40:54 +02:00 |
|
Alessio Morale
|
531d80a69c
|
OP-1476 - Fix other targets for OP_DFU changes
|
2014-09-16 22:40:54 +02:00 |
|
Alessio Morale
|
b971b713d6
|
OP-1476 - Fix Bootloader jumpToApp condition and change speed to 57600
|
2014-09-16 22:40:53 +02:00 |
|
Alessio Morale
|
7e73c59e90
|
OP-1476 - Fixes for Bootloader
- Allocate 10KBytes for bootloader;
- Replace pios_com_msg with pios_com for ssp support
- Change Speed to 9600 for higher reliability
|
2014-09-16 22:40:53 +02:00 |
|
Alessio Morale
|
c44dac2447
|
OP-1476 - fix bootloader for serial support
|
2014-09-16 22:40:53 +02:00 |
|
Alessio Morale
|
3eca0fefef
|
OP-1477 - Change mag GAIN to 1.3
|
2014-09-16 22:40:53 +02:00 |
|
Alessio Morale
|
250b7fe962
|
OP-1477 - Fix mag DRDY/GPIO support
|
2014-09-16 22:40:52 +02:00 |
|
Alessio Morale
|
14862c687d
|
OP-1477 - Add ubx handling libraries
|
2014-09-16 22:40:52 +02:00 |
|
Alessio Morale
|
a6fc5c9190
|
OP-1477 - Fixes for multi device support of HMC5x driver
|
2014-09-16 22:40:52 +02:00 |
|
Alessio Morale
|
bcb30ecbf3
|
OP-1477 - enable temp compensation and fix axis orders
|
2014-09-16 22:40:52 +02:00 |
|
Alessio Morale
|
4890ef3ab0
|
OP-1477 - Add support for Flash
|
2014-09-16 22:40:52 +02:00 |
|
Alessio Morale
|
146c1764fd
|
OP-1477 - UBX_DDC driver implementation
|
2014-09-16 22:40:52 +02:00 |
|