James Cotton
844d14e2f5
RM (NOT FOR PIPX) Properly select the GPIO->RX/TX mapping
2012-09-04 10:22:04 -05:00
James Cotton
0b947b243d
Revert "RFM22b: More block claims for rfm22_txStart"
...
This reverts commit fa4ca426abf5671fc7d0b7206f85f14bcbf92c3d.
2012-09-02 22:44:58 -05:00
James Cotton
dce4f36328
RFM22b: More block claims for rfm22_txStart
...
Warning: This patch makes the modem work more poorly
2012-09-02 22:44:58 -05:00
James Cotton
311bbcb539
RFM22b: Block transfers for more large SPI transfers
...
Preallocated buffers with various preambles etc. Used SPI_TransferBlock for
anything over a few bytes instead of burstWrite. Also make more of the
communications wrappered in a large semaphore grab using a new rfm22_write_noclaim()
Still needs work - probably because most of the methods to repeated calls they should
all use the noclaim, or more specifically that function becomes rfm22_write/read.
2012-09-02 14:35:56 -05:00
James Cotton
588297806c
RFM22b: Use SPI block transfers for filling the RFM22b FIFO
...
Also removed the disable irq line since that was introducing
flight glitches.
2012-09-01 21:24:42 -05:00
James Cotton
997319ae80
RFM22b: Begin doing blocks of transfers when possible between semaphore claims
...
The abstraction should probably be improved but ideally we start using
the DMA SPI transfers for PipX and grabbing/releasing the semaphore less
frequently (e.g. not for each 1-2 bytes).
2012-09-01 21:07:38 -05:00
James Cotton
042055b29a
RFM22b: Call the pendingISR routine from all the user space tasks. Got a valid connection with this.
2012-08-26 04:18:17 -05:00
James Cotton
f7cda1c0c4
RFM22b: No need to initialize the SPI. Done already.
2012-08-26 02:42:18 -05:00
James Cotton
477385ca25
RFM22b: Start to move the ISR into userspace
2012-08-26 02:41:19 -05:00
James Cotton
b1bd6d8583
PIOS_RFM22b: No need to set the SPI clock speed in the RFM22b module - it can be set by the driver configuration.
2012-08-26 00:00:39 -05:00
James Cotton
84d327c46a
RFM22b: Claim the bus semaphore before reading and writing.
2012-08-25 23:17:52 -05:00
Brian Webb
fad32dcc29
Split out the PipX radio interface from RadioComBridge module to a separate Radio module. Now the RadioComBridge module just routes messages between the com ports and handles sending/receiving the PipX UAVOs.
2012-08-25 11:41:32 -07:00
Brian Webb
861bcc46fe
Fixed RSSI reporting on PipX.
2012-06-06 21:14:31 -07:00
Brian Webb
e9d0909a68
Further improvements in link reliability on the PipX.
2012-06-06 17:44:56 -07:00
Brian Webb
5876df250d
Improved lockups on dropped packets.
2012-06-05 21:10:32 -07:00
Brian Webb
454144f46c
Pairing and saving settings working.
2012-05-06 20:47:21 -07:00
Brian Webb
e83fec0463
Merged latest origin/next.
2012-05-05 09:40:44 -07:00
Brian Webb
f726cc6a9d
Added a RTC supervisor timer to RFM22B driver.
2012-04-21 18:31:49 -07:00
Brian Webb
62c5036220
Added PipXStatus and PipXSetting UAVobjects and some initial support for them.
2012-04-17 17:36:05 -07:00
Brian Webb
4936cd8fd2
Added PipXStatus and PipXSettings UAVObjects and added support the sending/receiving UAVTalk objects on the PipX.
2012-04-10 20:22:53 -07:00
Brian Webb
7b49a6b820
Added watchdog to radio com bridge in PipXtreme.
2012-04-07 19:12:49 -07:00
Brian Webb
bc1adb2519
Some cleanup of rfm22 driver.
2012-04-06 17:36:35 -07:00
Brian Webb
fff93910e2
RFM22B device now fully interrupt driven. Packet handeling moved to RadioComBridge module.
2012-04-05 20:24:50 -07:00
Brian Webb
823b111d60
Added Reed-Solomon error correction to PipXtreme. The code is a slight modification of rsscode ( http://rscode.sourceforge.net ). Packet acking has also been turned on as the default, so each packet is error corrected, and if errors remain, the packet is NACKed, otherwise it is ACKed. Also temporarily turned off UAVTalk parsing. This was causing the CC to be identified as a PipX due to the PipX sending UAVObjects (I believe) from the system module. The system module is going to have to be modified/replaced for the PipX.
2012-03-18 17:43:29 -07:00
Brian Webb
ecdf150946
Moved RFM22B code from PipXtreme to pios_rfm22b.c driver. The radio is now passing data.
2012-03-18 10:22:05 -07:00
Brian Webb
b34b849453
Added start at a modified PipX packet handler.
2012-03-15 19:29:54 -07:00
Brian Webb
d73895de7d
Working PipX com relay.
2012-03-07 18:05:42 -07:00
Brian Webb
a0bdc58e5b
Added framework for rfm22b com device.
2012-02-28 21:30:06 -07:00
