1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-10 18:24:11 +01:00
Commit Graph

122 Commits

Author SHA1 Message Date
FredericG
3bc938d45e lowered I2C timoout whne using RTOS
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@842 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-21 09:19:02 +00:00
FredericG
c8f818a809 Do not configure the servo outputs when ENABLE_AUX_UART
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@839 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-20 18:02:26 +00:00
stac
20fa15c24a spi: fix block transfers
SPI block transfers were broken in commit r759.  Block
transfers are primarily used by the SD card interface so
this also broke accesses to the SD card.

SD card accesses should be fixed now.  Verified by writing
config objects in the GCS and confirming that they survived
a reboot of the OP board.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@808 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-18 04:28:32 +00:00
stac
771a56ca9d com/usart: generalize com driver API
- Created a pluggable COM layer
- Converted COM + USART init into static initializers
  rather than typedefs
- Generalized the USB HID COM API to match the USART
  API.
- Changed USART and COM layers to be data driven rather
  than #ifdef'ing/switching on the specifics of each port

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@760 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:24:26 +00:00
stac
8d015a57d0 pios spi: support both master and slave configs
Added support for SPI slave configurations to the pios SPI layer.

Converted the board specific configuration for the PIOS SPI layer to
use const static initializers rather than #defines (see pios_board.c).

SPI interface between the OP board and the AHRS is now operational at
a basic level, capable of moving simple single byte messages between
boards.  Multi-byte, CRC protected messages will be added on top of this.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@759 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:23:44 +00:00
stac
02e0017cbb stm32 lib: declare read-only parameters as const
Many of the STM32 library functions take a pointer to an
initialization structure.  In nearly every case, this struct
is a read-only (ie. const) parameter.

It is advantageous (and good coding practice) to actually declare
read-only data as const so that the compiler can place the const data
in the .rodata section which resides in flash and doesn't consume any
RAM.  This has the added bonus advantage that it is impossible for the
running application to corrupt the read-only data.

In order to allow passing pointers to const data into the library
functions, it is essential that the function prototypes also declare
their associated read-only parameters as const.  This commit adds
the const attribute to those parameters that are actually read-only.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@758 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:23:15 +00:00
stac
aebc358e46 usart: use macro definitions for bit positions
No functionality changed.  Clean up only.

Changed a few of the (1 << x) constructs to use existing macro
definitions to improve code readability.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@757 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:22:57 +00:00
stac
8b5e1e8aea init cleanup: use irq stack during early init
No functionality changed.  Clean up only.

Make early init code (Reset_Handler) use the existing irq stack
rather than the hard-coded one.

Remove (now) unused references to the hard-coded stack.

Removed the link-time check for a minimal task stack in RAM since
FreeRTOS allocates user stacks from the heap which is already reserved
in the .bss section (as symbol xHeap).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@756 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:22:47 +00:00
fredericg
a2beb49257 Changed PIOS_DEBUG_Panic()
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@694 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-31 16:22:58 +00:00
stac
140a51932f spi: fix cut/paste error for AHRS SPI setup
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@669 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-27 01:37:43 +00:00
stac
918250868b irq_stack: correct one word overlap of _irq_stack_top
The previous fix in r652 was _almost_ right.  There was
still a one word (4-byte) overlap between _irq_stack_top
and the start of the data segment.

_irq_stack_end + _irq_stack_size leaves the '.' pointer at
the word immediatly after the stack.  This commit corrects
this error and places _irq_stack_top on the last word
_inside_ the reserved space for the irq stack.

[Before]
  $ ./tools/arm-2009q3/bin/arm-none-eabi-nm -n ./build/openpilot/OpenPilot.elf
  ...
  20000000 A SRAM_BASE
  20000000 B _irq_stack_end
  20000400 d LED_GPIO_PORT   <--- overlap
  20000400 B _irq_stack_top  <--- overlap
  20000400 D _sdata
  20000408 d ADC_GPIO_PORT
  ...

[After]
  $ ./tools/arm-2009q3/bin/arm-none-eabi-nm -n ./build/openpilot/OpenPilot.elf
  ...
  20000000 A SRAM_BASE
  20000000 B _irq_stack_end
  200003fc B _irq_stack_top
  20000400 d LED_GPIO_PORT
  20000400 D _sdata
  20000408 d ADC_GPIO_PORT
  ...

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@668 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-27 01:37:40 +00:00
stac
874239154a Turn on -Werror on openpilot firmware build
This commit fixes all existing warnings.

All basic compiler warnings will now be treated as errors.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@658 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-24 16:33:46 +00:00
stac
6b2760da1a USB HID: basic COM functionality over USB HID
This fixes the COM interface over USB HID to the point where
it can establish and maintain solid communications with the UAVObject
Browser in the GCS.

Tested only on Linux.  The USB HID interface is still disabled for now
until it is tested successfully by a wider group.

Edit telemetry.c and set ALLOW_HID_TELEMETRY to 1 to enable telemetry
over the USB HID interface and report your results in the forum.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@656 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-24 16:33:40 +00:00
stac
41da33c920 irq_stack: provide a proper IRQ stack for FreeRTOS
The MSP (IRQ stack) was trampling across the data segment.  This was
especially disastrous in the USB interrupts since they allocate and
fill buffers on the stack.

The root of this trampling was that no RAM was being reserved for the
MSP and a hard-coded value of (0x20000400) was used as the initial MSP
base address.  This resulted in the first 1K bytes of the .data segment
overlapping with the IRQ stack.  As can be expected, all sorts of badness
resulted when interrupts were firing and trampling over variables.

This change reserves the first _isr_stack_size bytes at the beginning of
RAM for the MSP.  If an ISR call chain runs off of the end of the MSP,
a Hard Fault will be generated as the (now invalid) sp is accessed.

There are two stack pointers in the Cortex-M3 CPU.  These are MSP (Main
Stack Pointer) and PSP (Process Stack Pointer).

Which stack is in use at any given time is determined by the following table:

   Mode      CONTROL[ASPSEL]    Stack
   ----      ---------------    -----
   Thread    0                  MSP
   Thread    1                  PSP
   Handler   x                  MSP

Out of reset, the CPU is in Thread mode using the MSP.  The initial value
of the MSP is automatically loaded from address 0 (lowest word in boot
region -- typically FLASH) immediately prior to jumping to the reset vector.

When running at interrupt level, the Cortex-M3 always uses the MSP and the
ASPSEL bit is forced to zero.

FreeRTOS allocates a separate stack for each task upon task creation.  These
task stacks are allocated from the heap.  FreeRTOS sets the active stack to
the PSP whenever running in a task context (both in privileged mode and user
mode).

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@652 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-24 16:33:26 +00:00
sambas
d7b3a158d6 OP-22 Flight/PiOS: Spektrum bind function tested and working.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@649 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-23 11:19:28 +00:00
FredericG
09981b39c2 A few small fixes
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@647 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-22 06:30:42 +00:00
sambas
66fa56a1da OP-22 Flight/PiOS: Spektrum simple decoder works, getting seven working channels with my DX7 tx
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@630 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-16 10:04:07 +00:00
sambas
76cd72915d OP-22 Flight/PiOS: first tests done with spektrum satellite, I can read binded receiver serial stream
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@629 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-16 08:35:38 +00:00
sambas
26aecf720d OP-22 Flight/PiOS: Spektrum satellite protocol started
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@626 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-15 18:22:03 +00:00
gussy
5991a93739 Added GPIO functions for accelerometer full-scale selection.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@625 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-15 15:27:52 +00:00
gussy
22fbd8e4bd ADC Updates.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@618 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-12 12:09:35 +00:00
gussy
ff73ab5a80 More updates to cross-target compatibility.
Added PIOS_I2C into AHRS code.
Added PIOS_HMC5843 Module.




git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@617 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-12 08:18:49 +00:00
gussy
fe9aa9e38f Small USART scalability fix.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@616 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-12 01:56:00 +00:00
gussy
8f3c2dbafb Changes to PiOS to be compatible with the AHRS.
Updates to AHRS code.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@615 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-11 13:36:13 +00:00
vassilis
a31215293d Flight\Telemetry Implement telemetry settings object, added functions for changing the baud rate in PiOS
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@607 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-08 02:44:26 +00:00
gussy
a574f56961 HID Loopback test now working. GCS code now needs to be brought up to speed.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@583 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-04 19:56:06 +00:00
gussy
0aba12fe1f Loopback test of HID working. Still a WIP but committing what I have to show progress.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@582 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-04 18:54:43 +00:00
fredericg
3281b1a128 OP-27 Use RTOS in LockDevice() and UnlockDevice()
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@564 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-01 14:49:51 +00:00
vassilis
4f0377194d Flight/PiOS Remove use of semaphores in COM/USB ISR (not used and not working also causing random crashes)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@540 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-04-25 02:17:25 +00:00
vassilis
5889849060 OP-4 Flight/Telemetry Various bug fixes while testing telemetry (working but not fully tested)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@500 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-04-15 02:15:46 +00:00
sambas
402b4e8e24 Telemetry and HID work, ugly hacks atm. Endianess needs checking. HID transmit doesn't work at all. Serialport works both ways
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@472 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-04-10 16:22:08 +00:00
vassilis
f4c4b1371a Flight/Settings: Remove old settings implementation (replaced with binary settings as UAVObjects)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@465 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-04-10 01:35:13 +00:00
pete
f1694527cc Working on the PPM functionality. Getting there but it is still not 100% correct.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@411 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-30 04:48:15 +00:00
sambas
37a0ce845c Solved bad USART port init
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@383 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-25 10:52:38 +00:00
gussy
41fd921b14 Updated BMP085 test code.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@375 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-23 04:01:11 +00:00
gussy
bad62d3af3 Moved things around.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@372 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-22 02:51:52 +00:00
gussy
62f4e2c636 Add PIOS_EXTI.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@367 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-21 20:23:20 +00:00
gussy
a03952fb5d Small updates and clean up.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@355 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-21 00:49:48 +00:00
pete
a3486477eb Added PPM defines and created pios_ppm.c
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@325 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-17 04:00:13 +00:00
fredericg
e57ec315e1 fixed warning
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@319 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-15 12:00:47 +00:00
FredericG
8e873ec0e8 Use the new PIOS assert
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@315 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-14 17:13:27 +00:00
gussy
f75fa5e567 Updated ADC to use the 3 auxillary inputs on the OpenPilot board.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@312 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-14 12:00:43 +00:00
gussy
e1504dafc6 Add PIOS_GPIO for controlling the auxiliary connections on the OpenPilot board.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@311 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-14 11:59:11 +00:00
FredericG
7bd573f043 OP-36 PIOS_DEBUG_Assert() function
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@307 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-14 10:20:27 +00:00
gussy
7b5d85cb3e PIOS_LED: Initialise all LED's as off.
PIOS_SYS: Added system reset function.
OpenPilot Makefile: Default USE_BOOTLOADER should be NO.
OpenPilot Bootloader: Removed LED initialisation.



git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@303 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-14 06:47:57 +00:00
gussy
8ba2d76cd6 OP-21: Cleaning up a few things.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@302 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-13 20:46:46 +00:00
gussy
a0a92d5a59 OP-21: Made changes to OpenPilot makefile too allow building for bootloader and non-bootloader targets. Use "USE_BOOTLOADER = YES" to build for the OpenPilot Bootloader.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@300 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-13 20:01:31 +00:00
FredericG
3b332c786f OP-11 Use RTOS when waiting for an I2C transfer to finish when RTOS is enabled
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@298 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-13 17:28:42 +00:00
FredericG
50215e75c6 OP-28 Some changes in the I2C API
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@296 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-13 12:23:55 +00:00
FredericG
7b753399ec Drive all debug pins low at startup
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@295 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-13 10:52:10 +00:00