James Cotton
8b9c7277a6
Remove the connection to refreshWidgetValues() in output widget. Mike was
...
right and it's not needed since hte configTaskWidget takes care of this
connection.
2012-06-11 13:24:37 -05:00
James Cotton
a029fc4656
Merge branch 'next' into revo
...
Conflicts:
Makefile
2012-06-11 12:05:38 -05:00
James Cotton
93b77becc0
More the system task priority down and increase the timeout for erasing the
...
flash so it says completed. However, it still blocks the system for a long
time. During an erase the heartbeat will flash at 10 Hz to indicate what's
happening.
This still blocks telemetry even after lowering hte system priority (and there
is a vTaskDelay) which makes me think that the SPI bus being locked is blocking
Sensors or somethign else. This should not be permited when the system is
armed.
The reason the system locks up during the erase is that the file system
operations occur within the event dispatcher thread. It is very bad practice
for anything to block this (i.e. callbacks should never take very long). We
should probably move the object persistence handling into the system thread or
something but that can be a separate issue.
2012-06-11 12:03:32 -05:00
James Cotton
6f09b6d087
Fix misnamed slot in the output widget
2012-06-11 11:31:28 -05:00
James Cotton
c5a881086a
Fix some slots in config revo calibration
2012-06-11 11:30:16 -05:00
James Cotton
ec64a50ef9
Fix the slot name in map gadget
2012-06-11 11:27:08 -05:00
James Cotton
6d06daa7cd
Fix misnamed slot in the output widget
2012-06-11 11:21:08 -05:00
James Cotton
2db95a6b4f
Move the Sensors label position to teh correct spot
2012-06-09 12:19:08 -05:00
James Cotton
207cc93af0
Update the system health diagram to include warnings from the sensors module
...
and no longer show ahrs
2012-06-09 12:11:45 -05:00
James Cotton
3af9ea9174
In OSG load an airframe model that matches the system settings. This needs to
...
come from a resource file though.
2012-06-08 13:01:50 -05:00
James Cotton
823538dbbb
Forgot the fixed wing follower status
2012-06-08 10:46:40 -05:00
James Cotton
4c3ca17e34
Backport the fixed wing path follower
2012-06-08 10:46:39 -05:00
James Cotton
574ab3fcaa
Make the VtolPathFollower an optional module
...
Note that RTH mode right now checks that throttle control is enabled, but this
should only occur if the system is a VTOL.
2012-06-08 10:46:38 -05:00
James Cotton
d54970a58a
Fix from merging the UAV Trail option
2012-06-08 10:45:13 -05:00
James Cotton
f5b2575c88
Merge branch 'next' into revo
...
Conflicts:
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/Revolution/System/inc/pios_config.h
package/Makefile
2012-06-07 12:45:06 -05:00
James Cotton
7b8110a457
Merge branch 'MikeL' into next
2012-06-07 11:31:41 -05:00
James Cotton
9b7a8dc15f
Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into next
2012-06-07 11:27:51 -05:00
James Cotton
51a6370733
Separate GPS/UAV trails and context menu settings
...
Conflicts:
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.h
2012-06-07 09:51:11 -05:00
James Cotton
c689bcfb80
Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into revo
2012-06-07 09:49:18 -05:00
James Cotton
1e041e5788
Merge remote-tracking branch 'origin/next' into revo
2012-06-07 09:49:09 -05:00
Oleg Semyonov
95f66ddd76
AeroSimRC: add default simulatorId to prevent GCS crashes w/o config
...
GCS will crash when HITLv2 plugin is started if there is no
HITLv2 configuration in the OpenPilotGCS.xml. This is a workaround
to prevent this behavior. Better way might be to rework the GCS config
handling, but as a workaround this should work.
2012-06-07 12:52:08 +03:00
James Cotton
aa5832b1e8
Remove some style sheets that got dragged back in from conflict
2012-06-06 13:01:15 -05:00
James Cotton
5e01617cbd
Merge branch 'next' into MikeL
...
Conflicts:
ground/openpilotgcs/src/plugins/config/airframe.ui
ground/openpilotgcs/src/plugins/config/configoutputwidget.cpp
ground/openpilotgcs/src/plugins/config/configoutputwidget.h
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.h
2012-06-06 11:58:06 -05:00
Mike LaBranche
01820904a2
Merge conflict resolution: alter configvehicle,configoutput refreshWidgetsValues
...
signatures to conform to virtual in ConfigTaskWidget;
add multirotor mixer sliders to apply/save dirty monitor, fix slider signals;
2012-06-06 08:58:18 -07:00
Brian Webb
6f9c6ae86d
Only show PipX config gadget when the PipX is connected.
2012-06-05 19:34:42 -07:00
James Cotton
983153d87b
Waypoint importing now works
2012-06-05 18:06:43 -05:00
James Cotton
4550eafa02
Add the ability to export waypoints to an xml file
2012-06-05 17:38:01 -05:00
James Cotton
b4d59d3e3e
Dragging and dropping waypoints now works and updates the FC immediately.
2012-06-05 10:01:12 -05:00
James Cotton
302575714f
Filter updates from the UAVOs if the waypoints haven't changed since they are
...
set to periodic (and need to be right now until FC telemetry is fixed and sends
new instances).
2012-06-05 08:30:42 -05:00
James Cotton
ff36e880e9
Fix for pathcompiler and waypoint table regarding signals and new instances
2012-06-05 08:10:20 -05:00
Brian Webb
4e68f6543e
Added tracking of dropped packets to PipX and turned off visible text on signal strength meters.
2012-06-04 21:18:13 -07:00
Brian Webb
7abf32e4c2
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2-gui-upgrades
2012-06-04 18:24:20 -07:00
Mike LaBranche
682ab20f94
add accels.h, gyros.h zapped during conflict resolution
2012-06-04 17:13:55 -07:00
Mike LaBranche
0ba8345c51
Merge branch 'next' into MikeL
...
Conflicts:
flight/Bootloaders/Revolution/inc/pios_config.h
flight/Modules/OveroSync/inc/overosync.h
flight/Modules/Sensors/inc/sensors.h
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/PiOS/STM32F4xx/pios_iap.c
flight/Revolution/System/inc/pios_config.h
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
2012-06-04 16:59:31 -07:00
Mike LaBranche
bf591ebe45
Merge branch 'next' into MikeL
...
Conflicts:
flight/Bootloaders/Revolution/inc/pios_config.h
flight/Modules/OveroSync/inc/overosync.h
flight/Modules/Sensors/inc/sensors.h
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/PiOS/STM32F4xx/pios_iap.c
flight/Revolution/System/inc/pios_config.h
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
2012-06-04 15:38:57 -07:00
James Cotton
0b828fbdd0
Merge branch 'next' into revo
...
Conflicts:
Makefile
2012-06-04 14:12:19 -05:00
James Cotton
ff0a3a156e
Merge remote-tracking branch 'origin/os/AeroSimRC' into next
2012-06-04 12:25:59 -05:00
James Cotton
71e14a691e
Merge branch 'next' into revo
2012-06-03 19:00:51 -05:00
Sambas
eb4f90f188
Check if Homelocation is set before calibration
2012-06-03 18:25:22 -05:00
Sambas
2ec8423334
Mag calibration, does this make any sense?
2012-06-03 18:25:22 -05:00
James Cotton
4d75718347
While change the util manager make a few other methods use static accessors.
2012-06-03 18:16:21 -05:00
James Cotton
2d80d59e93
Make the uavobjectutilmanager handle the error condition on saving and not
...
segfault when a save fails.
2012-06-03 17:41:51 -05:00
Laura Sebesta
054f15c529
Added digital RSSI output to GUI.
2012-06-03 12:06:07 +03:00
James Cotton
e82621cbeb
Fix waypoint deletion
2012-06-02 18:40:55 -05:00
James Cotton
8aab4755e4
Try and cover a case that was making the waypointitem crash
2012-06-02 18:40:55 -05:00
James Cotton
0a842ac639
After deleting a waypoint (which really sets the last one to stop and shifts
...
the rest) any added waypoints were invisible. This puts the new one after the
first stop and removes the stop.
2012-06-02 18:40:54 -05:00
James Cotton
39657af8db
More work on deleting waypoints
2012-06-02 18:40:54 -05:00
James Cotton
e686ac0b1d
Start adding the ability to delete a waypoint
2012-06-02 18:40:53 -05:00
James Cotton
64ba15cf07
Add the ability to add waypoints via OPMap
2012-06-02 18:40:53 -05:00
James Cotton
4e1044589f
Add a coordinate conversion method to go from LLA to NED
2012-06-02 18:40:52 -05:00
