1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-04 12:24:11 +01:00
Commit Graph

1001 Commits

Author SHA1 Message Date
James Cotton
f02aacfeb6 Change the constant so LED flashing works properly on Revo 2012-07-28 11:22:24 -05:00
James Cotton
735c009843 Disable writing to the overo driver for every pios_com write again. It drives
up system consumption too much, although now data will get lost :(.
2012-07-25 13:15:47 -05:00
James Cotton
30085d23ff Reenable sending from the overo tx method but no longer yield since we aren't
using a blocking write anyway.
2012-07-24 11:29:24 -05:00
James Cotton
a90dd1ef5c For now do not call PIOS_OVERO_WriteData from the Tx method because this is too
slow (task yield?) and results in a lot of event system errors.
2012-07-24 11:18:58 -05:00
James Cotton
26f07c21f6 Fix the pios_overo driver for compiling against the bootloader 2012-07-23 10:07:42 -05:00
James Cotton
c5904b4667 Clean up the pios_overo driver. Working well now. 2012-07-20 13:57:47 -05:00
James Cotton
bcdd5a8bba Fixes to the overo module where it was thinking the fifo buffer writes failed 2012-07-20 13:45:31 -05:00
James Cotton
5091b16065 Needs work but it's sending data now 2012-07-20 11:36:49 -05:00
James Cotton
337f0e8bfa Properly enable circular buffering on the overo spi 2012-07-20 10:59:18 -05:00
James Cotton
6a3c067c18 Zero out the packet counter when pios_over is initialized. 2012-07-20 10:45:20 -05:00
James Cotton
fb215fd095 PiOS overo driver wasn't setting it's id and also clearing the DMA IRQ flags 2012-07-20 10:17:57 -05:00
James Cotton
6b3e5573a0 The overosync module now uses pios_com interface. 2012-07-20 09:46:28 -05:00
James Cotton
8fc2d10ea6 Get the pios_overo driver for pios_com compiling 2012-07-20 09:32:22 -05:00
James Cotton
1c4c373b86 Begin rewriting pios_overo to look like a standard com layer 2012-07-20 03:42:09 -05:00
James Cotton
7492d34d25 Merge branch 'overo_control' into revo 2012-07-19 08:35:39 -05:00
James Cotton
5ebd368b18 Merge branch 'next' into revo
Conflicts:
	flight/PiOS/STM32F10x/link_STM32103CB_PIPXTREME_sections.ld
2012-07-19 08:35:30 -05:00
James Cotton
2f64124da8 Updates to the pios_overo driver to fully reinit the dma and spi device between
packets
2012-07-17 17:21:28 -05:00
James Cotton
db27653859 Make the Overo module use the new driver 2012-07-17 16:11:23 -05:00
James Cotton
a6ba379af9 PIOS_OVERO driver which handles the communications to the overo and ensures the
data stays in frame.
2012-07-17 15:34:54 -05:00
James Cotton
92a0311b32 New pios_overo driver that handles the SPI communications to the overo 2012-07-17 13:31:00 -05:00
James Cotton
719772c98a Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into next 2012-07-16 11:42:29 -05:00
James Cotton
6b101d71af Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into revo 2012-07-15 12:32:35 -05:00
James Cotton
ce6bebceb6 Also strex needs to not clobber it's register to have predictable results.
OPReview-227
2012-07-14 19:47:03 -05:00
Michael Hope
fa3aa20e05 ld: make sure current pointer never goes backwards
Fixes linking on ld version 2.22.  Identical to 3cbf4499.
2012-07-14 19:47:03 -05:00
Michael Hope
0efb24a54b The destination register of an exclusive store must be
different from both the value and address register.  Fix building with
recent binutils by marking the result as early clobber.
2012-07-14 19:47:03 -05:00
James Cotton
8d4e221412 Remove the disable IRQ commands in PIOS_COM since they aren't needed. 2012-07-13 11:54:12 -05:00
James Cotton
d150fd5331 Merge branch 'next' into revo
Conflicts:
	flight/Modules/ManualControl/manualcontrol.c
	ground/openpilotgcs/src/plugins/config/input.ui
	ground/openpilotgcs/src/plugins/uavtalk/telemetry.cpp
	shared/uavobjectdefinition/manualcontrolsettings.xml
2012-07-13 10:40:14 -05:00
Brian Webb
3fabdb9963 Fixed conflicted merge with origin/next. 2012-07-11 19:25:05 -07:00
Stacey Sheldon
2396eaef5a uavobjectmanager: simplify new embedded metadata objects
Simplifies some of the code that handles the
metadata objects which are now embedded within
the data UAVOs.
2012-07-07 21:49:53 -04:00
Brian Webb
3405bc3ebe Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2 2012-06-30 10:06:51 -07:00
Brian Webb
10e52b31c5 Added the ability on the PipX to specify if a comport is used to connect to the GCS (ground side), so it will receive status, etc, or UAVTalk (flight side). The data passing in RadioComBridge was also made more uniform, which allows for easier reconfiguration. 2012-06-30 10:06:28 -07:00
James Cotton
cd311642dd Merge branch 'next' into revo 2012-06-28 10:35:47 +02:00
Stacey Sheldon
154d971d4d flash: don't call vTaskDelay() before OS init
PIOS_Flash_Jedec_EraseChip is called during early
init when the table_magic has changed.  This call
happens on CC/CC3D prior to the OS being initialized
so it is not OK to call vTaskDelay() yet.

This was leading to boards locking up (no flashing blue
LED) immediately after jumping to the application when
the table_magic had changed or was being init'd for the
very first time.
2012-06-24 12:23:34 -04:00
James Cotton
f8d196ffe8 Added support for board voltage monitor to battery module.
The module can be configured to enable what's needed from board voltage, battery voltage and battery current measurement.
In GCS the POWER box in system healt will show alarm related to the supply voltage to the board.
If a power warning/critical alarm is raised, the warning condition is left even if the board voltage return to an acceptable value.

Conflicts:

	ground/openpilotgcs/share/openpilotgcs/diagrams/default/system-health.svg
	shared/uavobjectdefinition/systemalarms.xml
2012-06-15 19:43:34 -05:00
James Cotton
01d47d6373 Accidental semicolon led to MPU6000 always failing self test. Another bug
masked that behavior.  I suck.
2012-06-11 12:22:24 -05:00
James Cotton
a029fc4656 Merge branch 'next' into revo
Conflicts:
	Makefile
2012-06-11 12:05:38 -05:00
James Cotton
93b77becc0 More the system task priority down and increase the timeout for erasing the
flash so it says completed.  However, it still blocks the system for a long
time.  During an erase the heartbeat will flash at 10 Hz to indicate what's
happening.

This still blocks telemetry even after lowering hte system priority (and there
is a vTaskDelay) which makes me think that the SPI bus being locked is blocking
Sensors or somethign else.  This should not be permited when the system is
armed.

The reason the system locks up during the erase is that the file system
operations occur within the event dispatcher thread.  It is very bad practice
for anything to block this (i.e. callbacks should never take very long).  We
should probably move the object persistence handling into the system thread or
something but that can be a separate issue.
2012-06-11 12:03:32 -05:00
James Cotton
821a25e419 For now make the F4 PIOS_ADC return an error code if there is no new data in
the ADC buffer.  This should be handled appropriately by the caller.
2012-06-11 09:22:04 -05:00
James Cotton
f5845cb037 Fix self test for MPU6000 so it returns negative values per our standard 2012-06-09 11:18:14 -05:00
James Cotton
f5b2575c88 Merge branch 'next' into revo
Conflicts:
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/Revolution/System/inc/pios_config.h
	package/Makefile
2012-06-07 12:45:06 -05:00
James Cotton
7b8110a457 Merge branch 'MikeL' into next 2012-06-07 11:31:41 -05:00
James Cotton
c689bcfb80 Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into revo 2012-06-07 09:49:18 -05:00
Brian Webb
861bcc46fe Fixed RSSI reporting on PipX. 2012-06-06 21:14:31 -07:00
Brian Webb
e9d0909a68 Further improvements in link reliability on the PipX. 2012-06-06 17:44:56 -07:00
James Cotton
5e01617cbd Merge branch 'next' into MikeL
Conflicts:
	ground/openpilotgcs/src/plugins/config/airframe.ui
	ground/openpilotgcs/src/plugins/config/configoutputwidget.cpp
	ground/openpilotgcs/src/plugins/config/configoutputwidget.h
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.h
2012-06-06 11:58:06 -05:00
Brian Webb
5876df250d Improved lockups on dropped packets. 2012-06-05 21:10:32 -07:00
Brian Webb
25fe50e9b1 Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2 2012-06-04 18:26:05 -07:00
Mike LaBranche
0ba8345c51 Merge branch 'next' into MikeL
Conflicts:
	flight/Bootloaders/Revolution/inc/pios_config.h
	flight/Modules/OveroSync/inc/overosync.h
	flight/Modules/Sensors/inc/sensors.h
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/PiOS/STM32F4xx/pios_iap.c
	flight/Revolution/System/inc/pios_config.h
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
2012-06-04 16:59:31 -07:00
Mike LaBranche
bf591ebe45 Merge branch 'next' into MikeL
Conflicts:
	flight/Bootloaders/Revolution/inc/pios_config.h
	flight/Modules/OveroSync/inc/overosync.h
	flight/Modules/Sensors/inc/sensors.h
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/PiOS/STM32F4xx/pios_iap.c
	flight/Revolution/System/inc/pios_config.h
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
2012-06-04 15:38:57 -07:00
James Cotton
9f93c9cbec Get PIOS_GCSRCVR working on revo 2012-06-04 09:48:05 -05:00