m_thread
b0b1a42aec
OP-1837 This change adds support for the Multiplex SRXL v1 and v2 protocols.
...
Protocol version is autodetected and 12 or 16 channels are supported.
SRXL is available on Flexiport of Revolution board.
2015-04-26 15:04:52 +02:00
Corvus Corax
7e421b99a4
uncrustificationization
2015-01-25 15:48:45 +01:00
Laurent Lalanne
68f9763e73
OP-1652 Typo FlexiIOPin
2015-01-21 14:32:21 +01:00
Laurent Lalanne
bc178b8a95
OP-1652 WS281x pins : Update flight side for revo
2015-01-21 14:12:36 +01:00
Stefan Karlsson
004f5a32a9
OP-1528 Enable Telemetry on the Flexi-IO (receiver) port on the Revo
2014-10-06 21:28:09 +02:00
Alessio Morale
1067ea59d1
OP-1379 - Split pios_ws2811.h in config and public api header
2014-08-12 22:19:30 +02:00
Alessio Morale
711c5ea79d
OP-1312 Fixes the flicker issue in Revo. Raised the Transfer complete irq priotity to prevent delays stopping the timer.
2014-05-11 10:43:24 +02:00
Alessio Morale
19caa57dc6
OP-1312 fix copy/paste-naming issue
2014-05-03 11:45:30 +02:00
Alessio Morale
3897106f4d
OP-1312 remove boilerplate from config using macros.
...
Use four locations for ch1+update dma source to exploit fifo and memory read bursts
2014-05-01 10:33:44 +02:00
Alessio Morale
4cece04166
OP-1312 fix documentation, get rid of stale comments from previous implementations
2014-04-27 19:12:36 +02:00
Alessio Morale
99f19dd809
OP-1312 Make WS2811 driver configurable.
...
Now output pin may be chosen among all servo outputs and Flexi-io pins 3 and 4 (they are not used for PWM input/output)
2014-04-26 19:48:44 +02:00
Alessio Morale
a0b857337f
OP-1312 Add support for Revolution (right now always active on pin3). Configurability not yet added
2014-04-26 18:40:59 +02:00
Corvus Corax
c6031ed963
fixed usr flash system definition
2013-11-17 21:03:08 +01:00
Corvus Corax
c7431623af
changed hardware definition for revolution to have usr space in just one arena
...
(no flash garbage collection since used primarily for logging where there are no deletes)
2013-11-17 20:43:53 +01:00
Brian Webb
e246ecf536
Moves pios_led functionality to pios_gpio and makes pios_led a thin layer over pios_gpio. Supports configuring multiple sets of GPIOs.
2013-07-28 07:01:08 -07:00
Oleg Semyonov
7f84307714
OP-997: fix release notes. This change was reverted but not documented
2013-06-22 18:29:40 +02:00
Alessio Morale
1cb69e6a0e
OP-997: Revert Revolution settings storage to external flash to prevent freezes during sector erase/garbage collection
2013-06-09 19:17:12 +02:00
Sexy Pony
900f643bbd
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
Alessio Morale
ab7af16be3
Merge branch 'amorale/OP-901_lib_udates-usb_fixes' into HEAD
...
Conflicts:
flight/pios/stm32f10x/library.mk
flight/targets/boards/revoproto/firmware/pios_board.c
2013-05-19 15:01:08 +02:00
Alessio Morale
c1f767b12d
Merge remote-tracking branch 'origin/amorale/OP-954_logfs_settings_in_internal_flash' into next
...
Conflicts:
flight/pios/common/pios_flashfs_logfs.c
2013-05-18 15:53:25 +02:00
Alessio Morale
67e41c34fc
Merge remote-tracking branch 'origin/next' into amorale/usb_fixes
2013-05-17 22:46:42 +02:00
Brian Webb
156109bb88
Added support for an active low USB vsense line.
2013-05-14 20:37:13 -07:00
Alessio Morale
535b53cb1c
Raised priority for USB interrupt to high, changed subriority to 0 (PriorityGroup is 0)
2013-05-11 22:41:05 +02:00
Stacey Sheldon
565de5fd4e
f4 usb: ensure correct interface numbers for BL and FW
...
The interface numbers differ for the HID interface between
the BL and FW. This is required to keep windows happy.
In HID+CDC, the CDC interfaces must come first with HID last
which makes it #2 . In HID only mode, we can't use #2 for HID
since windows doesn't like the first/only interface to be
anything other than #0 .
Conflicts:
flight/targets/board_hw_defs/discoveryf4/board_hw_defs.c
flight/targets/board_hw_defs/flyingf4/board_hw_defs.c
flight/targets/board_hw_defs/freedom/board_hw_defs.c
flight/targets/board_hw_defs/quanton/board_hw_defs.c
2013-05-11 22:41:02 +02:00
Stacey Sheldon
207bd671ac
usb: fix interfaces in USB HW defs for RevoMini
2013-05-11 22:38:27 +02:00
Alessio Morale
d555bd0673
Uses Internal flash for system settings storage repourposing external flash for "User" storage
2013-05-11 22:06:30 +02:00
Brian Webb
84a0f981e0
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into OP-932-Modularize_Radio_Driver
2013-05-03 14:08:40 +01:00
Brian Webb
c3ea1bf3c0
OP-932: Fixed GPIO debugging on RevoMini (both V1 and V2)
2013-05-01 03:13:36 +01:00
sambas
abe3742217
Merge remote-tracking branch 'remotes/origin/next' into sambas/diffnext
...
Conflicts:
flight/Libraries/CoordinateConversions.c
flight/Libraries/paths.c
flight/Modules/System/systemmod.c
flight/PiOS/STM32F4xx/pios_sys.c
flight/targets/boards/coptercontrol/pios_board.h
flight/targets/boards/revolution/pios_board.h
flight/targets/boards/revoproto/pios_board.h
2013-04-25 17:26:49 +03:00
Oleg Semyonov
1dd20eca33
OP-899: move board_hw_defs.c under board directories and fix some includes
2013-04-24 00:07:06 +03:00
