Brian Webb
8ead1200b9
RFM22B: Added timing synchronization on transmit to try to eliminate both sides transmitting at the same time. This now achieves virtually 0 re-transmissions for close range transmission while transmitting both full telemety and PPM at 64k.
2012-12-11 17:44:20 -07:00
Brian Webb
7f6a718354
RFM22B: Added optional debug signals on the telemetry port of the PipX. Also fixed a couple of bugs that were causing excessive re-transmissions (found using the debug signals).
2012-12-11 17:44:19 -07:00
Brian Webb
fecc23eb49
RFM22B/OPLink: Auto-configuration of remote com port now working.
2012-12-11 17:44:17 -07:00
Brian Webb
6ffe518509
RFM22B: Improved link stability, and added tracking of error encountered in the processes of transmitting and receiving.
2012-12-11 17:44:15 -07:00
Brian Webb
4cb311538a
RFM22B: Improved reliability, especially with reconnection after a timeout, although there is still too many resent packets.
2012-12-11 17:44:14 -07:00
Brian Webb
7a930807aa
RM: Fixed initialization of the debug console.
2012-12-11 17:44:12 -07:00
Brian Webb
6ed9b63da9
RFM22B: Changing configuration parameters over-the-air working. Added tracking of Tx/Rx sequence number. Still seeing too many resent packets.
2012-12-11 17:44:11 -07:00
Brian Webb
0dce12e984
RFM22B: Finised handshacking on ACK and changed the link quality metric to use resent packets rather than missed packets.
2012-12-11 17:44:09 -07:00
Brian Webb
7aaa02268f
RFM22B: Added TX Resent to OPLink status. Also removed the need for the packet queue.
2012-12-11 17:44:08 -07:00
Brian Webb
fa5f7a8fdd
RFM22B: All packets are now ACKed, and added a formal connection request / accept that will be used or auto-configuring the remote modem.
2012-12-11 17:44:06 -07:00
Brian Webb
98026966f7
RFM22B: Added PPM packets to rfm22 driver.
2012-12-11 17:44:04 -07:00
Brian Webb
04da5d2377
USB/COM/RFM22B: Added a standard com callback to test for link availability. This replaces the PIOS_USB_CheckAvailable function with a generic PIOS_COM_Available function. This is now used by the RFM22B com driver to test if a good link is up. This was originally written by James, and Brian merged it into the latest RFM22B branch.
2012-12-11 17:44:03 -07:00
Brian Webb
e36bd678e1
RFM22B: Allow a receive to happen between transmitts.
2012-12-11 17:44:01 -07:00
Brian Webb
9f43e1151c
RFM22B: Fixed status reporting and connection status for OPLink.
2012-12-11 17:44:00 -07:00
Brian Webb
15fc29560a
RM: Remove configuration of the RFM22B from the RevoMini pios_board.c. This is in preparation for auto-configuration.
2012-12-11 17:43:58 -07:00
Brian Webb
bd42083376
RFM22B: Changed the way the frequencies and power settings are set for the rfm22b device.
2012-12-11 17:43:55 -07:00
Brian Webb
dae382564a
RFM22B/RM: Added rfm22b com device, moved remaining functionality in the radio module to the rfm22 driver, and simplified configuration of the PipX/OPLink. The radio device now presents itself completely as a com device, both in RadioComBridge (OPLink devices) and Telemetry (RM). Also change the PipXStatus and PipXSettings UAVOs to OPLinkStatus/OPLinkSettings.
2012-12-11 17:43:53 -07:00
Brian Webb
0113b6a748
Added UAVTalkRelayInputStream to the UAVTalk library that parses a UAVTalk packet and sends it when it is complete. This allows the interlieving of packets on an output UAVTalk stream, and is used by the OPLink device to relay packets from an input com port to a different output com port without sending one packet in the middle of another packet.
2012-12-11 17:43:50 -07:00
Brian Webb
4b90f81f6f
RFM22B: Modified the method of tracking RX errors, and now reporting Good, Corrected, Error, and Missed packets to the GCS. Also removed some less useful fields from the PipXStatus.
2012-12-11 17:43:49 -07:00
Corvus Corax
7ac258352a
OP-753 - prevent flying in wrong direction in FlyVector mode.
2012-12-04 16:18:24 +01:00
a*morale
20eb2d7b98
Fixed RTC clock
2012-11-23 19:43:31 +01:00
a*morale
2d83e8a779
Fixes for SBUS support on RM2.
...
Note: it needs the RTC timing to be fixed as it seems that it runs at half its nominal 625Hz value
2012-11-23 19:41:23 +01:00
Corvus Corax
c6effbbb0f
bugfix to pathplanner
2012-11-23 12:29:25 +01:00
Corvus Corax
55f0d41016
bugfix in fixed wing path follower
2012-11-23 11:49:17 +01:00
Corvus Corax
7059d4f032
changed some details as to dschin's suggestions
2012-11-22 13:26:45 +01:00
Corvus Corax
264f631df6
Merge branch 'corvuscorax/baro_fixes' into revo-fixes
2012-11-22 11:51:36 +01:00
Corvus Corax
4e32413954
removed pathplannersettings from flight
2012-11-11 14:57:52 +01:00
Corvus Corax
5981d9acd6
removed surplus NEDposition uavobject
2012-11-06 10:13:09 +01:00
Corvus Corax
3c8ffa9773
Revert "When in indoor mode reset the baro offset to zero"
...
This reverts commit 9c512261e6
2012-11-06 09:42:14 +01:00
Corvus Corax
e8232ba825
Pathplanner: removed pathPlannersettings and preprogrammed (hardcoded) paths
2012-11-05 16:04:45 +01:00
Corvus Corax
cc8e56f170
OP699: changed update rate to use constant
2012-11-05 15:59:13 +01:00
Corvus Corax
4367bd62bf
OP-699 : removed unnecessary object queue in pathplanner
2012-11-05 10:34:44 +01:00
Corvus Corax
e5ab038a89
removed unnecessary comment
2012-11-05 10:33:51 +01:00
Corvus Corax
e2ca9cbb45
OP-699 - refacor ugly buzzer code actuaor module
2012-11-05 10:09:43 +01:00
a*morale
774dde3da5
Normalized the HW configuration to point to _RM_ configuration settins
2012-11-04 13:37:06 +01:00
a*morale
920c2682d2
Fixed UAVObjects.inc for RM to cope with airsped fixes
2012-11-04 11:37:41 +01:00
a*morale
75730e7260
Merge branch 'revo-next' of ssh://git.openpilot.org/revo into revo-next
2012-11-03 21:36:51 +01:00
a*morale
0df1c22933
Fixed channel group for DSM on flexyport
2012-11-03 20:41:33 +01:00
Corvus Corax
3f248915cb
Merge remote-tracking branch 'origin/revo-next' into corvuscorax/airspeed_fixes
2012-11-03 20:03:18 +01:00
a*morale
553b49cdbf
Fixed Flexy serial assingment and added case for telemetry on flexy port
2012-11-02 23:27:15 +01:00
a*morale
3affe846db
Added support for TxPID for RM
2012-11-02 18:06:26 +01:00
a*morale
cfbdaddc94
Fixed invalid value for MS5611 oversample configuration
2012-11-02 17:31:51 +01:00
Stacey Sheldon
492fbc88b0
revomini: remove references to POI UAVOs
2012-10-30 21:47:17 -04:00
Sambas
f189596b3d
bootfix, GPS module not included
2012-10-30 20:51:13 +01:00
Sambas
019691e49d
Compile fixes
2012-10-30 20:50:58 +01:00
Stacey Sheldon
5aa3777078
Merge remote-tracking branch 'op-public/next' into revo-next
...
Conflicts:
flight/Modules/Telemetry/telemetry.c
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
2012-10-30 00:41:35 -04:00
Stacey Sheldon
2119067722
Merge remote-tracking branch 'op-revo/james/revo' into revo-next
...
Conflicts:
Makefile
flight/Modules/Attitude/revolution/attitude.c
flight/Modules/Battery/battery.c
flight/Modules/FixedWingPathFollower/fixedwingpathfollower.c
flight/Modules/GPS/GPS.c
flight/Modules/ManualControl/inc/manualcontrol.h
flight/Modules/ManualControl/manualcontrol.c
flight/Modules/OveroSync/overosync.c
flight/Modules/PathPlanner/inc/pathplanner.h
flight/Modules/PathPlanner/pathplanner.c
flight/Modules/Sensors/sensors.c
flight/Modules/VtolPathFollower/vtolpathfollower.c
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/PiOS/Boards/pios_board.h
flight/PiOS/STM32F4xx/library.mk
flight/PiOS/inc/pios_hmc5883.h
flight/PiOS/inc/pios_l3gd20.h
flight/PiOS/inc/pios_rfm22b_priv.h
flight/Revolution/Makefile
flight/Revolution/Makefile.osx
flight/Revolution/System/inc/pios_config.h
flight/Revolution/UAVObjects.inc
ground/openpilotgcs/src/libs/utils/coordinateconversions.cpp
ground/openpilotgcs/src/libs/utils/homelocationutil.cpp
ground/openpilotgcs/src/libs/utils/homelocationutil.h
ground/openpilotgcs/src/plugins/config/configrevowidget.cpp
ground/openpilotgcs/src/plugins/hitlnew/il2simulator.cpp
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
ground/openpilotgcs/src/plugins/plugins.pro
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
package/Makefile
shared/uavobjectdefinition/fixedwingpathfollowersettings.xml
shared/uavobjectdefinition/fixedwingpathfollowerstatus.xml
shared/uavobjectdefinition/flightstatus.xml
shared/uavobjectdefinition/hwsettings.xml
shared/uavobjectdefinition/manualcontrolsettings.xml
shared/uavobjectdefinition/pathdesired.xml
shared/uavobjectdefinition/vtolpathfollowersettings.xml
shared/uavobjectdefinition/waypoint.xml
2012-10-30 00:08:43 -04:00
Corvus Corax
6409dfb2df
Further cleanup in PathFollower. Should now be safe to fly again
2012-10-28 21:49:22 +01:00
Corvus Corax
f7dd5cc8ad
Refactored Airspeed and FixedWingPathFollowermodule to use AirspeedActual, which hitl writes to, too. Cleaned up both PathFollower and Airspeed a bit.
2012-10-28 17:45:40 +01:00
lilvinz
3db04ea174
pios_jedec: fixed usage of uninitialized memory
...
When reading the jedec device id the code only transfered one byte via spi leaving
the expected input buffer uninitialized. This may lead to the problem that flash
initialization fails because the expected input may be whatever the stack was set
when entering the function. The impact of the bug is somewhat limited tough as the
initialization usually takes place before starting up the rtos and thus is pretty
deterministic. So if the code passed init while testing it should pass init in
production as well.
2012-10-28 14:34:20 +01:00
