Brian Webb
8ead1200b9
RFM22B: Added timing synchronization on transmit to try to eliminate both sides transmitting at the same time. This now achieves virtually 0 re-transmissions for close range transmission while transmitting both full telemety and PPM at 64k.
2012-12-11 17:44:20 -07:00
Brian Webb
7f6a718354
RFM22B: Added optional debug signals on the telemetry port of the PipX. Also fixed a couple of bugs that were causing excessive re-transmissions (found using the debug signals).
2012-12-11 17:44:19 -07:00
Brian Webb
fecc23eb49
RFM22B/OPLink: Auto-configuration of remote com port now working.
2012-12-11 17:44:17 -07:00
Brian Webb
6ffe518509
RFM22B: Improved link stability, and added tracking of error encountered in the processes of transmitting and receiving.
2012-12-11 17:44:15 -07:00
Brian Webb
4cb311538a
RFM22B: Improved reliability, especially with reconnection after a timeout, although there is still too many resent packets.
2012-12-11 17:44:14 -07:00
Brian Webb
6ed9b63da9
RFM22B: Changing configuration parameters over-the-air working. Added tracking of Tx/Rx sequence number. Still seeing too many resent packets.
2012-12-11 17:44:11 -07:00
Brian Webb
0dce12e984
RFM22B: Finised handshacking on ACK and changed the link quality metric to use resent packets rather than missed packets.
2012-12-11 17:44:09 -07:00
Brian Webb
7aaa02268f
RFM22B: Added TX Resent to OPLink status. Also removed the need for the packet queue.
2012-12-11 17:44:08 -07:00
Brian Webb
fa5f7a8fdd
RFM22B: All packets are now ACKed, and added a formal connection request / accept that will be used or auto-configuring the remote modem.
2012-12-11 17:44:06 -07:00
Brian Webb
98026966f7
RFM22B: Added PPM packets to rfm22 driver.
2012-12-11 17:44:04 -07:00
Brian Webb
04da5d2377
USB/COM/RFM22B: Added a standard com callback to test for link availability. This replaces the PIOS_USB_CheckAvailable function with a generic PIOS_COM_Available function. This is now used by the RFM22B com driver to test if a good link is up. This was originally written by James, and Brian merged it into the latest RFM22B branch.
2012-12-11 17:44:03 -07:00
Brian Webb
e36bd678e1
RFM22B: Allow a receive to happen between transmitts.
2012-12-11 17:44:01 -07:00
Brian Webb
9f43e1151c
RFM22B: Fixed status reporting and connection status for OPLink.
2012-12-11 17:44:00 -07:00
Brian Webb
bd42083376
RFM22B: Changed the way the frequencies and power settings are set for the rfm22b device.
2012-12-11 17:43:55 -07:00
Brian Webb
dae382564a
RFM22B/RM: Added rfm22b com device, moved remaining functionality in the radio module to the rfm22 driver, and simplified configuration of the PipX/OPLink. The radio device now presents itself completely as a com device, both in RadioComBridge (OPLink devices) and Telemetry (RM). Also change the PipXStatus and PipXSettings UAVOs to OPLinkStatus/OPLinkSettings.
2012-12-11 17:43:53 -07:00
Brian Webb
4b90f81f6f
RFM22B: Modified the method of tracking RX errors, and now reporting Good, Corrected, Error, and Missed packets to the GCS. Also removed some less useful fields from the PipXStatus.
2012-12-11 17:43:49 -07:00
a*morale
2d83e8a779
Fixes for SBUS support on RM2.
...
Note: it needs the RTC timing to be fixed as it seems that it runs at half its nominal 625Hz value
2012-11-23 19:41:23 +01:00
Stacey Sheldon
5aa3777078
Merge remote-tracking branch 'op-public/next' into revo-next
...
Conflicts:
flight/Modules/Telemetry/telemetry.c
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
2012-10-30 00:41:35 -04:00
Stacey Sheldon
2119067722
Merge remote-tracking branch 'op-revo/james/revo' into revo-next
...
Conflicts:
Makefile
flight/Modules/Attitude/revolution/attitude.c
flight/Modules/Battery/battery.c
flight/Modules/FixedWingPathFollower/fixedwingpathfollower.c
flight/Modules/GPS/GPS.c
flight/Modules/ManualControl/inc/manualcontrol.h
flight/Modules/ManualControl/manualcontrol.c
flight/Modules/OveroSync/overosync.c
flight/Modules/PathPlanner/inc/pathplanner.h
flight/Modules/PathPlanner/pathplanner.c
flight/Modules/Sensors/sensors.c
flight/Modules/VtolPathFollower/vtolpathfollower.c
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/PiOS/Boards/pios_board.h
flight/PiOS/STM32F4xx/library.mk
flight/PiOS/inc/pios_hmc5883.h
flight/PiOS/inc/pios_l3gd20.h
flight/PiOS/inc/pios_rfm22b_priv.h
flight/Revolution/Makefile
flight/Revolution/Makefile.osx
flight/Revolution/System/inc/pios_config.h
flight/Revolution/UAVObjects.inc
ground/openpilotgcs/src/libs/utils/coordinateconversions.cpp
ground/openpilotgcs/src/libs/utils/homelocationutil.cpp
ground/openpilotgcs/src/libs/utils/homelocationutil.h
ground/openpilotgcs/src/plugins/config/configrevowidget.cpp
ground/openpilotgcs/src/plugins/hitlnew/il2simulator.cpp
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
ground/openpilotgcs/src/plugins/plugins.pro
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
package/Makefile
shared/uavobjectdefinition/fixedwingpathfollowersettings.xml
shared/uavobjectdefinition/fixedwingpathfollowerstatus.xml
shared/uavobjectdefinition/flightstatus.xml
shared/uavobjectdefinition/hwsettings.xml
shared/uavobjectdefinition/manualcontrolsettings.xml
shared/uavobjectdefinition/pathdesired.xml
shared/uavobjectdefinition/vtolpathfollowersettings.xml
shared/uavobjectdefinition/waypoint.xml
2012-10-30 00:08:43 -04:00
lilvinz
3db04ea174
pios_jedec: fixed usage of uninitialized memory
...
When reading the jedec device id the code only transfered one byte via spi leaving
the expected input buffer uninitialized. This may lead to the problem that flash
initialization fails because the expected input may be whatever the stack was set
when entering the function. The impact of the bug is somewhat limited tough as the
initialization usually takes place before starting up the rtos and thus is pretty
deterministic. So if the code passed init while testing it should pass init in
production as well.
2012-10-28 14:34:20 +01:00
Stacey Sheldon
127ca1e7e1
Merge remote-tracking branch 'op-public/next' into revo-next
...
Conflicts:
ground/openpilotgcs/src/plugins/hitl/plugin.pro
ground/openpilotgcs/src/plugins/hitlnew/fgsimulator.cpp
ground/openpilotgcs/src/plugins/hitlnew/hitlconfiguration.cpp
ground/openpilotgcs/src/plugins/hitlnew/hitloptionspage.cpp
ground/openpilotgcs/src/plugins/hitlnew/hitloptionspage.ui
ground/openpilotgcs/src/plugins/hitlnew/il2simulator.cpp
ground/openpilotgcs/src/plugins/hitlnew/simulator.cpp
ground/openpilotgcs/src/plugins/hitlnew/simulator.h
ground/openpilotgcs/src/plugins/hitlnew/xplanesimulator.cpp
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
2012-10-20 13:56:18 -04:00
James Cotton
17f3c4d4e0
Re-add our code for accessing the run time information in freertos.
2012-10-09 09:57:57 -05:00
James Cotton
72c84fc49c
Upgrade to FreeRTOS 7.2.0
2012-10-09 09:48:02 -05:00
Brian Webb
9ea572f4f7
RFM22B: Fixed the signedness of the return value of the RSSI function.
2012-10-04 21:23:44 -07:00
Brian Webb
5724fa083c
RFM22B: Added link quality calculation based on number of dropped packets. Also added packet error correction, which apparently wasn't being done before.
2012-10-04 21:11:40 -07:00
Brian Webb
9b9d0c0d1e
RFM22B: Added back configuration of the RF Power and RF Datarate. Also added setting of the destination ID in the rfm22b driver.
2012-10-03 20:03:35 -07:00
Brian Webb
3cdb9df05f
RFM22B: Removed setting register 0x58 in the rfm22_setDatarate call, which was breaking all data rates < 100000 bps. Also temporatily fixed the datarate at 64kbps.
2012-10-02 20:59:43 -07:00
Brian Webb
a8590045a8
RFM22B: Moved radio status reporting from the radio module into the rfm22b driver task.
2012-10-02 19:52:21 -07:00
a*morale
be752b8075
Fixed some declaration to Exti functions to make it compile.
2012-09-30 17:04:36 +02:00
James Cotton
b0d8487e27
PIOS_RFM22: Make the irq return false for the exti changes
2012-09-28 02:14:15 -05:00
James Cotton
5c13c31c08
Merge branch 'next' into revo
...
Conflicts:
ground/openpilotgcs/src/libs/utils/homelocationutil.cpp
ground/openpilotgcs/src/libs/utils/homelocationutil.h
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
ground/openpilotgcs/src/plugins/uavobjectutil/uavobjectutilmanager.cpp
2012-09-28 01:00:10 -05:00
James Cotton
8979c00fba
Merge branch 'exti_end_switching_isr' into next
2012-09-28 00:41:08 -05:00
Stacey Sheldon
9896a0d416
Merge remote-tracking branch 'op-public/next' into revo-next
...
Conflicts:
ground/openpilotgcs/src/libs/utils/homelocationutil.cpp
ground/openpilotgcs/src/libs/utils/homelocationutil.h
ground/openpilotgcs/src/plugins/uavobjectutil/uavobjectutilmanager.cpp
shared/uavobjectdefinition/taskinfo.xml
2012-09-27 22:42:44 -04:00
James Cotton
1721479a12
Fix for vinz' merge to pios_mpu6000 exti changes
2012-09-27 14:34:11 -05:00
Brian Webb
6972c29813
RFM22B: Added check for timeout wating for sync on receive. This virtually eliminates the number of timeouts.
2012-09-25 18:10:15 -07:00
Brian Webb
88be2ddf1e
RFM22B: Added a message timeout event to the RFM22B state machine that will fire if a packet takes too long to transmit / receive.
2012-09-24 20:51:34 -07:00
Brian Webb
a070e1cc3e
RFM22B: Added PIOS_RFM22B_Receive_Packet function and removed rx buffer.
2012-09-23 08:36:38 -07:00
Brian Webb
a46e3cdec3
RFM22B: All outgoing data to the radio is now going through the PIOS_RFM22B_Send_Packet call. Also removed all global variables with the exception of the rx buffer.
2012-09-22 20:13:11 -07:00
Brian Webb
61200f01f5
RFM22B: Major refactoring of te RFM22B driver to implement a state machine for the driver. The state machine should now be complete, and the driver seems to be working pretty well on both the RM and the pipx.
2012-09-22 20:13:10 -07:00
Brian Webb
80509d264e
RFM22B: Start at cleaning up the processing interrupt handling, and starting to make it more of a state machine. Also removed the supervisor, which was causing unnecessary resets. The supervisor functionality is not in the the driver thread.
2012-09-22 20:13:08 -07:00
Brian Webb
8ca2e85f4c
RFM22B: Removed incorrect defaulting of tx power level.
2012-09-22 20:13:05 -07:00
Brian Webb
6623c55846
RFM22B: Moved ISR processing thread into the rfm22b driver.
2012-09-22 20:13:03 -07:00
lilvinz
a6a7ed8157
pios_exti: added returnvalues to exti handlers which allows to use portEND_SWITCHING_ISR
2012-09-16 21:44:09 +02:00
lilvinz
524cff1c40
pios_mpu6000: fixed masked locals mistake
2012-09-16 21:25:06 +02:00
James Cotton
88b483f37d
PIOS_MPU6000: Make the driver perform the rotation to bring it into the OP
...
coordinate system
Previously there were hacks spread throughout to deal with various ways of
positioning the chips. Now the driver structure specifies the rotation
of the chip relative to the board layout and the output X/Y/Z are already
in OP convention.
This flag seems to do the right thing for Revolution, CC3D, and RevoMini
2012-09-11 01:46:22 -05:00
James Cotton
527edcbee9
RFM22b: Get rid of the burst read commands and do a block transfer
2012-09-08 12:39:14 -05:00
James Cotton
1f0004e9db
RFM22b: Abstract out the port into the driver initiation
...
Also use a separate function to claim the bus semaphore and
assert the CS line.
2012-09-08 12:38:54 -05:00
James Cotton
68fa464ccf
RM: Make the direction of the TX/RX lines come from the configuration file
2012-09-04 23:22:56 -05:00
James Cotton
844d14e2f5
RM (NOT FOR PIPX) Properly select the GPIO->RX/TX mapping
2012-09-04 10:22:04 -05:00
James Cotton
0b947b243d
Revert "RFM22b: More block claims for rfm22_txStart"
...
This reverts commit fa4ca426abf5671fc7d0b7206f85f14bcbf92c3d.
2012-09-02 22:44:58 -05:00
