Framework for levelling UI no functional code yet.
Some general cleanup of ccpm code.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2688 ebee16cc-31ac-478f-84a7-5cbb03baadba
Added column to csv file to show if data changed from previous row.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2673 ebee16cc-31ac-478f-84a7-5cbb03baadba
Putting Corvus patch back in. Need to delete uavobjects-synthetics directory
for this to work.
This reverts commit 9cd98bec8fb5e0679c625eb256a94d161a8ce345.
Conflicts:
flight/CopterControl/Makefile
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2671 ebee16cc-31ac-478f-84a7-5cbb03baadba
Note: This patch did not build after a clean build.
This reverts commit 7e75b5d16481a32689433c868b67916816d8b9fb.
Conflicts:
flight/CopterControl/Makefile
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2651 ebee16cc-31ac-478f-84a7-5cbb03baadba
On architectures supporting automatic initializing, flight/UAVObjects/uavobjectsinit_linker.c is used
On architectures NOT supporting automatic initializing, an uavobjectgenerated file build/uavobject-synthetics/flight/init/uavobjectsinit.c is used
build/uavobjects-synthetics/flight/uavobjectsinit.c went away, so that a wildcard include in the Makefile will not include the (wrong) initialisation code in either version
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2640 ebee16cc-31ac-478f-84a7-5cbb03baadba
First attempt to add logging to the scope gadget.
Logs a snapshot of data from the scope configuration at the same rate as the update timer set in the options page.
This has configurability via the options page for logging path.
File name is based on the configuration name and the date/time the logging starts.
This uses synchronous file writes in the update timer.
Tested to work on Win XP and Linux (Fedora 14)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2634 ebee16cc-31ac-478f-84a7-5cbb03baadba
- Fixed unescaped backslashes in openpilotgcs.pro, translations.pro, glc_lib.pro (don't like warnings).
- Fixed comments in Windows installer batch file.
- Changed Windows uninstaller section names for better readability.
- Changed Windows installer executable properties (makes sense if you use SubWCRev).
- temporary disabled Windows installer Spanish language until someone helps with translation (no changes for GCS itself).
- small beautification of winx86.pro.
- some changes in the top Makefile.cmd (more changeable parameters for batch build)
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2609 ebee16cc-31ac-478f-84a7-5cbb03baadba
Thanks to:
- zhao0079 for Chinese translation,
- Corvus Corax for German translation.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2598 ebee16cc-31ac-478f-84a7-5cbb03baadba
Now they can include special chars like '.' (dot), '-' (dash), '/' (slash), ' ' (space). All such chars will be removed from autogenerated identifiers ("S.Bus" -> SBUS), but kept intact in text strings (to be displayed by the GCS).
This will not change any existing object IDs.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2592 ebee16cc-31ac-478f-84a7-5cbb03baadba
Moved obsolete Wix installer into Experimental branch. NSIS installer moved one level up. Now it supports new build directory structure, does not require to be copied into it and can be built using packaging/winx86/Makefile.cmd or as a qmake-generated "installer" target (using "make installer"). NOTE: this target will NOT be built automatically, you have to build it yourself.
Install system requires Unicode NSIS installer and optionally uses SubWCRev.exe utility (from TortoiseSVN package) to extract some build info from local SVN copy (like revision number, etc.). This info then is available as a properties of installer executable and also used in the installer's executable file name. SubWCRev utility is optional, if it is not found - no extra info will be generated and used.
Also fixed unescaped backslash in openpilotgcs.pri (please check that it does not break !win32 builds).
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2584 ebee16cc-31ac-478f-84a7-5cbb03baadba
It is not yet fully functional as a top-level Qt-Creator project file (some dependencies need to be fixed).
So Qt-Creator users, please use the following sequence to build all for the 1st time:
1) Run qmake in ground (generated gcs Makefiles lack uavobject targets - known problem);
2) Build in uavobjgenerator;
2) Build in uavobjects;
3) Run qmake in ground again (IMPORTANT - now correct gcs Makefiles will be generated).
Now you may build openpilotgcs. If uavobjects are added/removed, you need to repeat all steps after uavobjects.pro modification.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2536 ebee16cc-31ac-478f-84a7-5cbb03baadba
This meta-project allows qt-creator users to open
and configure a single project and to build all
required software to produce a GCS. This includes
regenerating all uavobject output.
NOTE: To use this meta-project, you MUST perform these
steps once for each SVN checkout:
- Open <top>/ground/ground.pro in qt-creator
- Select the "Projects" tab
- Under Build Settings/General heading, click "Show Details"
- Activate "Shadow Build"
- Set your Build Directory to <top>/build/ground
<top> = The full path to the base of your svn tree which should
contain "flight", "ground", etc.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2531 ebee16cc-31ac-478f-84a7-5cbb03baadba
This will be used by a master project for qt-creator to
allow it to automatically generate the uavobject output
for qt-creator users.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2530 ebee16cc-31ac-478f-84a7-5cbb03baadba
This will allow us to create a simpler project file
for those that use the qt-creator gui.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2529 ebee16cc-31ac-478f-84a7-5cbb03baadba
This will allow us to build a parent project for
qt-creator that sits above both openpilotgcs and
uavobjgenerator so that we can build both projects
at the same time.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2528 ebee16cc-31ac-478f-84a7-5cbb03baadba
Move generated Java UAVObject output into the common synthetic
tree for all UAVObject output.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2527 ebee16cc-31ac-478f-84a7-5cbb03baadba
The UAVObject definition (.xml) files are used by both the
GCS build as well as the flight software builds.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2526 ebee16cc-31ac-478f-84a7-5cbb03baadba
The UAVObject generator is intended to be a standalone tool.
As such, it doesn't belong under the openpilotgcs directory.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2525 ebee16cc-31ac-478f-84a7-5cbb03baadba
Also note that the command line option to the uavobjectgenerator
binary for matlab has changed from "mathlab" to "matlab".
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2523 ebee16cc-31ac-478f-84a7-5cbb03baadba
