Brian Webb
fc0328a3cd
OP-932 Adds working one-way mode to the OPLink radio connection. In this mode, packets will only flow from the ground side (coordinator modem) to the flight side modem.
2013-06-26 17:57:32 -07:00
Brian Webb
774a74884a
OP-932 Replaces the RFM22B PPM/receiver code with an OPLinkReceiver UAVObject. This object is generated on a coordinator OPLink, and is used by both the OPLink to generate PPM output, and the OPLinkReceiver on the Revo.
2013-06-26 17:57:11 -07:00
Brian Webb
8c370df319
OP-932 A significant re-work of the OPLink and configuration of the OPLink. Auto-configuration is removed, and remote modems are bound the coordinator, rather than the other way around. Timing of the radio link is also significantly changed. The rfm22b code is also simplified so that it only sends packet, and has no notion about what those packets are, so the rfm22b is converteded to simply a com type device.
2013-06-26 17:56:56 -07:00
Brian Webb
08efc8d152
OP-932: Adds an oplink receiver device, which is based on the gcs receiver device, but uses the OPLinkReceiver UAVObject. The OPLinkReceiver packets are generated on the OPLink modem.
2013-06-26 17:56:20 -07:00
Brian Webb
7c10623615
OP-932 Adds a semaphore to PPM input to signal when a new frame has been received. This can be used to process a new frame with as low a latency as possible.
2013-06-26 17:56:10 -07:00
Brian Webb
ac75af55c1
OP-932 Moves the PIOS_PPM_OUT_Set function from pios_ppm_out_priv.h to pios_ppm_out.h
2013-06-26 17:55:56 -07:00
Alessio Morale
0b8d18ae49
OP-994 Move common defines to architecture specific header
...
+review OPReview-506
2013-06-24 18:50:44 +02:00
Corvus Corax
6163c5f53a
Merge branch 'next' into corvuscorax/OP-947_stateestimator-module
...
Conflicts:
flight/modules/AltitudeHold/altitudehold.c
ground/openpilotgcs/share/openpilotgcs/pfd/default/AltitudeScale.qml
ground/openpilotgcs/share/openpilotgcs/pfd/default/PfdIndicators.qml
ground/openpilotgcs/share/openpilotgcs/pfd/default/SpeedScale.qml
ground/openpilotgcs/src/plugins/pfd/pfdgadgetwidget.cpp
2013-06-22 18:44:03 +02:00
Alessio Morale
5cc3645b96
Uncrustify
2013-06-18 20:23:46 +02:00
Alessio Morale
2b232ae155
Fix bootloader usb issues caused by USB reconnection fixes.
...
Issues were related to missing usb detection and broken communication while updloading fw.
They are now skipped in NON FreeRTOS mode (aka bootloader).
+review OPReview
2013-06-17 20:24:07 +02:00
Corvus Corax
1d17d08cca
Merge branch 'next' into corvuscorax/OP-947_stateestimator-module
2013-06-12 18:32:01 +02:00
Alessio Morale
ad123a2761
Merge remote-tracking branch 'origin/amorale/OP-980_connection_reliability_issue' into next
2013-06-11 15:39:34 +02:00
Alessio Morale
2c0f7794a9
Merge remote-tracking branch 'origin/amorale/OP-997_revolution_settings_to_ext_flash' into next
2013-06-11 15:39:13 +02:00
Alessio Morale
f767d64f0c
OP-980 Remove the timeout logic as it causing troubles with windows
...
platform
2013-06-11 10:27:32 +02:00
Corvus Corax
88071b1078
Merge remote-tracking branch 'next' into corvuscorax/OP-947_stateestimator-module
2013-06-09 22:43:25 +02:00
Corvus Corax
6f59c49506
just uncrustification
2013-06-09 22:09:04 +02:00
Alessio Morale
e9b3ee52f3
OP-997: add fields to SystemStatsUavo to monitor storage status
2013-06-09 19:20:00 +02:00
Corvus Corax
218e15ce61
Merge branch 'next' into corvuscorax/OP-947_stateestimator-module
2013-06-09 17:24:08 +02:00
Alessio Morale
87db5d30b0
OP-980 change how the semaphore is used on PIOS_USB_CheckAvailable to prevent deadlocks
2013-06-09 16:14:44 +02:00
Corvus Corax
022f1a1ac0
Merge branch 'next' into corvuscorax/OP-947_stateestimator-module
...
Conflicts:
flight/modules/Attitude/revolution/attitude.c
2013-06-09 13:49:52 +02:00
Alessio Morale
107b930573
Merge remote-tracking branch 'origin/amorale/OP-980_revolution_usb_reconnect' into next
2013-06-09 09:07:24 +02:00
Alessio Morale
ab1c9c157f
OP-995: Fixes for correct battery monitor readout
2013-06-08 13:40:01 +02:00
Alessio Morale
51a7f27b99
OP-994 Add an API to PIOS_ADC to get directly the Voltage value
2013-06-08 13:36:54 +02:00
Corvus Corax
6fdf554d4a
Merge branch 'next' into corvuscorax/OP-947_stateestimator-module
...
Conflicts:
flight/modules/Attitude/revolution/attitude.c
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
shared/uavobjectdefinition/attitudesettings.xml
2013-06-06 19:25:54 +02:00
Alessio Morale
ee7887c406
OP-980 Extended the memory barrier macros and fixed barrier kind in pios_usb_hid
...
+review OPReview-501
2013-06-06 10:26:41 +02:00
Mathieu Rondonneau
45391abd55
OP-976: RE-run uncrustify
2013-06-05 19:48:56 -07:00
Mathieu Rondonneau
a8c946dcb2
OP-976: Fix uncrustify changes that put a space before the ";" in the macro
2013-06-05 19:46:55 -07:00
Mathieu Rondonneau
d2fae1abed
OP-976: fixing function name in the macro although don't have any effect since the linker directives are local.
2013-06-05 19:15:47 -07:00
Alessio Morale
c340bfc294
OP-980 Insert locking while checking status in PIOS_USB_CheckAvailable
...
+review OPReview-501
2013-06-06 01:42:26 +02:00
Alessio Morale
5fa73624da
OP-980 Added memory barrier to preserve sequence to ensure callback validation
...
+review OPReview-501
2013-06-06 01:39:45 +02:00
Corvus Corax
6f6ca2481e
Changed CoordinateConversion to use doubles for LLA2NED conversion, so coordinates can be represented in ECEF with sufficient resolution
2013-06-05 20:40:49 +02:00
Alessio Morale
b4f8b02a42
Revert "some optimizations, use real rx and tx buffer size instead of max buffer leghts"
...
It does not work in Windows so need further investigation prior to undo this revert
This reverts commit 901db6f828
.
+review OPReview-501
2013-06-05 19:01:01 +02:00
Alessio Morale
8fb81ae17b
OP-980 uncrustify
...
+review OPReview-501
2013-06-05 01:02:37 +02:00
Alessio Morale
f1f48b0ec6
OP-980 Fix usb reconnection issue for Revolution target.
...
step 3: add a timeout on rx_active to prevent rx locks
2013-06-05 00:54:08 +02:00
Alessio Morale
901db6f828
some optimizations, use real rx and tx buffer size instead of max buffer leghts
2013-06-05 00:53:50 +02:00
Alessio Morale
ce2bce353f
OP-980 Fix usb reconnection issue for Revolution target.
...
step 2: check for cable disconnection (vbus) and issue a SW reconnection
2013-06-05 00:04:26 +02:00
Mathieu Rondonneau
23b2907d08
OP-976: Add the ';' back
...
This compile successfuly with make all_flight
2013-06-03 20:37:40 -07:00
Alessio Morale
14b87383b9
OP-980 Fix usb reconnection issue for Revolution target.
...
step 1: reset tx/rx_active flags on disconnection/reconnection
2013-06-04 01:52:44 +02:00
Brian Webb
e9f83bcc80
Fixes a bug in the rfm22b driver that was reading past the end of the bindings list when receiving a status message. Also adds some formatting changes that came about after doing a make uncrustify_all.
2013-05-26 08:36:38 -07:00
Corvus Corax
40864b2d3b
some cleanups
2013-05-23 21:21:14 +02:00
Corvus Corax
843db63cf6
some last issues from review
2013-05-22 23:08:48 +02:00
Brian Webb
ac4847c8ac
OP-932 Moves the configuration of the com ports on the coordinator OPLink to startup.
2013-05-21 19:48:21 -07:00
Brian Webb
dbce08a151
OP-932 Changes the radio task loop to loop every 1ms, and reduces the tx transmit period back down to 8ms. Also reduces the Tx windows to 1ms for each modem, and reserves the latter half of the Tx window for channel changing.
2013-05-21 17:40:05 -07:00
Brian Webb
d4a4588011
OP-932 Changes the RFM22 frequency hopping to change channels every Tx period. Also increases the Tx clock period from 8ms to 16ms, and adds a check on calculation the the time delta that it doesn't change the previous estimated time delta by too much. If the delta between the current time delta and the previously estimated time delta is too large it could indicate that there was a delay somewhere that makes the calculated time delta inaccurate.
...
Rearanges the packet send priority in the rfm22b driver so that PPM packets are top priority.
2013-05-20 20:49:24 -07:00
Sexy Pony
900f643bbd
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
Alessio Morale
ab7af16be3
Merge branch 'amorale/OP-901_lib_udates-usb_fixes' into HEAD
...
Conflicts:
flight/pios/stm32f10x/library.mk
flight/targets/boards/revoproto/firmware/pios_board.c
2013-05-19 15:01:08 +02:00
Alessio Morale
37eabb0931
Pointed type is explicitly used with sizeof when dealing with struct pointers.
...
+review OPReview-474
2013-05-19 12:00:16 +02:00
Alessio Morale
2e458b5652
OP-901 USB OTG/Device Drivers are not targeted for f103 (they are targeted at f105) so move again to F4 library folder instead of common
2013-05-18 20:53:28 +02:00
Alessio Morale
3ec9447fdc
OP-901 Update CMSIS to r3p2-00rel1
2013-05-18 20:29:06 +02:00
Alessio Morale
c1f767b12d
Merge remote-tracking branch 'origin/amorale/OP-954_logfs_settings_in_internal_flash' into next
...
Conflicts:
flight/pios/common/pios_flashfs_logfs.c
2013-05-18 15:53:25 +02:00
Alessio Morale
66da2796e0
Merge remote-tracking branch 'origin/amorale/OP-905_revolution_watchdog_next' into next
2013-05-18 15:00:50 +02:00
Alessio Morale
aba64689a6
OP-901 removed stale core_cm3.c file
2013-05-18 14:25:37 +02:00
Alessio Morale
976ad90211
OP-901 Updated F4 CMSIS startup files, Moved USB OTG and USB Device library to common
2013-05-18 14:03:03 +02:00
Alessio Morale
f0c01d0eff
OP-901 Updated F4 StdPeriph Driver Library to V1.1.0
2013-05-18 13:57:45 +02:00
Alessio Morale
448e98b336
OP-901 Updated F1 StdPeriph Driver Library to v3.5.0
2013-05-18 13:55:43 +02:00
Brian Webb
bc4f615c25
Adds setting HSE_VALUE on all F1 targets (should only be necessary if the HSE clock is not 8MHz).
...
Moves the CMSIS system_stm3210x.c from library.mk to the individual Makefiles for the F1 targets. This allows for custom SystemInit functions where necessary.
2013-05-17 22:01:48 -07:00
Alessio Morale
67e41c34fc
Merge remote-tracking branch 'origin/next' into amorale/usb_fixes
2013-05-17 22:46:42 +02:00
Alessio Morale
2735f8a620
OP-901 Updated common CMSIS files
2013-05-17 22:41:34 +02:00
Alessio Morale
13ee42a42a
OP-901 Fixed errors due to unused parameter
2013-05-17 22:39:16 +02:00
Richard Flay (Hyper)
a6aedee9fa
Merge branch 'next' into brian/support_inverted_USB_vsense
2013-05-17 05:54:42 +09:30
Richard Flay (Hyper)
031ea3e069
Merge branch 'next' into brian/code_cleanup_130514
2013-05-17 05:49:38 +09:30
Alessio Morale
c80f01dff9
OP-954 Rename the legacy PIOS_INCLUDE_FLASH_SECTOR_SETTINGS to PIOS_INCLUDE_FLASH_LOGFS_SETTINGS
...
+review OPReview-470
2013-05-15 23:16:34 +02:00
Richard Flay (Hyper)
ae14c13195
Merge branch 'next' into hyper/OP-951_add--Wshadow-to-flight-CFLAGS
...
Conflicts:
flight/modules/ManualControl/manualcontrol.c
2013-05-16 06:28:56 +09:30
Richard Flay (Hyper)
ef5bb6f6fe
Merge branch 'next' into OP-950_spi_fixes_FreeRTOS
2013-05-16 05:41:09 +09:30
Brian Webb
156109bb88
Added support for an active low USB vsense line.
2013-05-14 20:37:13 -07:00
Brian Webb
1608d11416
Cleans up some compiler warnings/erros and adds missing ifdefs around some e.g. WDG calls.
2013-05-14 20:22:54 -07:00
Stacey Sheldon
280f537644
f4 usb: ensure that we NAK on unused OUT endpoints
...
The ST USB code will automatically receive on any
endpoint that is opened but not in the NAK state.
Make sure we set OUT endpoints to NAK initially.
It also happily writes via a NULL pointer in ep->xfer_buff
which writes to address 0x0000_0000. Since address
0x0 is aliased onto the internal flash by the BOOT0/1 pins
and the internal flash is (normally) in the LOCKED state,
this write puts the internal flash into an errored state.
This errored state means that writes to internal flash
are no longer allowed and all further writes fail.
2013-05-14 23:50:17 +02:00
Alessio Morale
8d57d8ff76
Internal flash settings for F1
...
Conflicts:
flight/pios/stm32f10x/pios_flash_internal.c
2013-05-14 22:58:05 +02:00
sambas
da23fd6784
Added F1 internal flash driver
...
Conflicts:
flight/pios/stm32f10x/pios_flash_internal.c
Conflicts:
flight/pios/stm32f10x/pios_flash_internal.c
2013-05-14 22:56:12 +02:00
Alessio Morale
707e648457
OP-905: Fixes. Prevent LogFS from triggering watchdog
2013-05-14 18:43:39 +02:00
Richard Flay (Hyper)
ed68fbe68d
OP-951: Adds -Wshadow to flight CFLAGS and fixes resulting compilation breakage.
...
+review OPReview
2013-05-14 07:01:45 +09:30
Oleg Semyonov
e5970ed25d
logfs: fix unit tests (requires MIN declaration from pios_math.h)
2013-05-12 03:51:00 +03:00
Alessio Morale
30b755b7aa
OP-901 fixed errors due to unused parameter and applied fix against fifo empty bug on usb_dcd_int.c
2013-05-11 23:49:52 +02:00
Alessio Morale
95a3e99b7c
OP-901 updated STM32 USB OTG Driver (updated configuration)
2013-05-11 23:12:14 +02:00
Alessio Morale
24fcea168c
OP-901 Updated STM32F4 USB Device Library
2013-05-11 23:12:13 +02:00
Alessio Morale
ccc24d844a
OP-901 updated STM32 USB OTG Driver
2013-05-11 23:10:47 +02:00
lilvinz
1016b08b70
f4 usb: removed DCD_EP_Flush on endpoint TX
...
This has probably caused the problem that prevented tx after
a bus reconnection.
2013-05-11 22:41:05 +02:00
Stacey Sheldon
0d8fe83dca
usb cdc: advertise support for line coding and serial state
...
The CDC descriptor was not advertising support the the line
coding and serial state messages. This was preventing Mac
from sending the SetControlLineState message to indicate
that a DTE (ie terminal program) was present and reading
from the serial port.
We support (and depend on) the DTE indication now so this
was making CDC not work on Mac.
Linux seems to provide the indication regardless of whether
it is advertised in the descriptor or not.
2013-05-11 22:41:03 +02:00
Stacey Sheldon
0e0571149b
f4 usb: ensure that we NAK on unused OUT endpoints
...
The ST USB code will automatically receive on any
endpoint that is opened but not in the NAK state.
Make sure we set OUT endpoints to NAK initially.
It also happily writes via a NULL pointer in ep->xfer_buff
which writes to address 0x0000_0000. Since address
0x0 is aliased onto the internal flash by the BOOT0/1 pins
and the internal flash is (normally) in the LOCKED state,
this write puts the internal flash into an errored state.
This errored state means that writes to internal flash
are no longer allowed and all further writes fail.
2013-05-11 22:41:03 +02:00
Stacey Sheldon
2165a5afe1
f4 usb hid: handle SET_IDLE request
...
The code doesn't do anything useful with the SET_IDLE
but this helps to keep the wireshark USB traces clean
so that the real errors stand out better.
2013-05-11 22:41:02 +02:00
Stacey Sheldon
c22daec1b0
usb cdc: avoid need for ZLP by using tx buffers smaller than max
...
USB CDC uses BULK endpoints to send/receive data. Typically,
a USB host will enqueue large buffers on its IN (device-to-host)
URBs. These buffers are larger than the max packet size for the
bulk endpoint.
The USB standard requires that an IN transfer ends when one of
these is true:
* a short packet (ie. less than max packet size) is sent by the
device
* a zero length packet (ZLP)
* enough packets that the entire host buffer is filled
Our device implementation never sends ZLPs. We sometimes send
packets that are exactly max-packet-size bytes long. This would
result in partially filling a host buffer without signalling (via
ZLP) that the transmission had finished. The host would then wait
until the next transfer had taken place before processing the first
data, thus delaying the first data.
This change simply forces all of our transfers to be short packets
and avoids the need to worry about zero length packets. This is
at the cost of some efficiency on the host side since its large
buffers will only ever be partially filled.
Conflicts:
flight/PiOS/STM32F30x/pios_usb_cdc.c
2013-05-11 22:41:01 +02:00
Stacey Sheldon
366c573bab
f4 usb hid: send correct report ID in dummy report
...
The desired report ID is in the LSB of the wValue field,
not the MSB. This will now send the correct report ID
back to the host.
2013-05-11 22:41:01 +02:00
Stacey Sheldon
232f9b2f8f
f4 usb hid: use static data for dummy report Tx
...
This code was previously passing a pointer to stack
data into PIOS_USBHOOK_CtrlTx() which may be sending
this data asynchronously. Now pass a pointer to
static data so that the asynchronous send doesn't
tx random stack contents.
2013-05-11 22:41:00 +02:00
Stacey Sheldon
859734af98
f4 usb: fix tracking of OUT requests with data stages
...
This code was mistakenly tracking the IN (device-to-host)
requests with data stages. It should have been tracking
the OUT (host-to-device) requests with data stages.
This tracking data is important now that CDC is supported.
CDC actually uses OUT requests with data stages whereas HID
does not. This bug only triggered once CDC was enabled.
2013-05-11 22:41:00 +02:00
Stacey Sheldon
b56f5206bd
com/usart/cdc: ensure that device structs are memset before use
...
CDC and USART device drivers were not all clearing their
device structs before using them.
This specifically caused crashes in the case where the upper
COM layer was binding only a Tx path. The Rx path callback
in the lower driver was uninitialized random data and would
result in the lower driver faulting when it tried to call the
callback.
Conflicts:
flight/PiOS/STM32F30x/pios_usart.c
flight/PiOS/STM32F30x/pios_usb_cdc.c
flight/PiOS/STM32F30x/pios_usb_hid.c
2013-05-11 22:40:59 +02:00
Stacey Sheldon
e16be98224
usb cdc: ensure com buffer is drained when no DTE is attached
...
The CDC layer on F1, F3 and F4 now always acts like an
infinte data sink whenever *either* there is no DTE present
(ie. no terminal program listening) *or* the USB cable is
disconnected.
F1 and F4 were previously checking the cable but not the DTE.
F3 didn't check anything. The COM layer didn't even ask the
lower layers.
All of this used to mean that any time a caller did a blocking
send to a CDC device without a DTE, it would eventually block
for up to a 5s timeout waiting for space in the Tx buffer.
Conflicts:
flight/PiOS/STM32F30x/pios_usb_cdc.c
2013-05-11 22:40:58 +02:00
Stacey Sheldon
c702ca0f1b
usbhook: fix up indentation
...
No functional changes.
2013-05-11 22:40:57 +02:00
Stacey Sheldon
cb6f4a474e
f4 usb: ensure data buffers are 4-byte aligned
...
4-byte alignment is required for DMA.
2013-05-11 22:40:56 +02:00
Stacey Sheldon
f4bed187f4
f4 usb cdc: implement CDC class driver for STM32 F4 SoCs
2013-05-11 22:38:26 +02:00
Stacey Sheldon
19714d2316
f4 usb: allocate TX FIFO RAM for endpoints 2 and 3
...
This is required to support USB CDC mgmt and data
endpoints.
2013-05-11 22:38:25 +02:00
Stacey Sheldon
02addaf4a0
usbhook: make ctrl endpoint OUT treat request as const
...
The req parameter is passed to the OUT stage as a convenience.
Since the OUT callback is called *after* the transfer has occurred,
modifying the req would have absolutely no effect. Marking this
as const makes this expectation clear.
2013-05-11 22:38:25 +02:00
Stacey Sheldon
590feefd9b
f1 usb cdc: ensure uart state is transmitted on control endpoint
...
Previously, the IN stage on the CTRL interface would write (and
send) its data via the buffer owned by the DATA endpoint. This
would probably have overwritten any data being sent at that
moment. This may have caused data corruption from FC -> GCS.
2013-05-11 22:35:19 +02:00
Alessio Morale
511283c608
Flash internal: writes optimization using 4 bytes parallelism
2013-05-11 22:04:47 +02:00
Richard Flay (Hyper)
04f59d5910
OP-950: Adds "higher priority task woken" logic to SPI and SPI bus resident
...
sensor device drivers. Based partly on code contributed by lilvinz.
+review OPReview
2013-05-11 16:18:34 +09:30
Corvus Corax
b76df471ee
bugfix on revo proto. STM32F4 A revision has a hardware bug and cannot do flash prefetching properly
2013-05-10 19:53:51 +02:00
Werner Backes
7c9d2ce9a5
Merge branch 'D-Lite/OP-934_rfm22b_rcvr_timeout_handling_next' into next
2013-05-10 09:59:30 +02:00
Richard Flay (Hyper)
cf14608ebe
Merge branch 'next' into hyper/OP-936_task-monitor-rework
2013-05-09 19:25:02 +09:30
Stacey Sheldon
8ab50bca13
flashfs: use uintptr_t instead of uint32_t in flashfs API
2013-05-08 19:42:01 +02:00
Stacey Sheldon
99e61dd617
logfs: support multiple instances of logfs
...
Conflicts:
flight/pios/common/pios_flashfs_logfs.c
flight/pios/inc/pios_flashfs_logfs_priv.h
flight/tests/logfs/pios.h
flight/tests/logfs/pios_config.h
flight/tests/logfs/unittest.cpp
2013-05-08 19:28:11 +02:00
Alessio Morale
93bad2e8c2
Merge branch 'amorale/OP-917_f4_bootloader_updater' into next
...
***** PLEASE NOTE ***** From this revision all F4 based boards (Revolution/OSD) needs bootloader version 5 to boot properly
Conflicts:
flight/pios/stm32f4xx/libraries/CMSIS2/Device/ST/STM32F4xx/Source/osd/system_stm32f4xx.c
flight/targets/boards/osd/board-info.mk
make/boot-defs.mk
make/common-defs.mk
2013-05-07 21:02:41 +02:00
Werner Backes
938ed58918
Corrected timout calculation formula.
2013-05-06 14:20:53 +02:00
Werner Backes
bb87e6390e
Update ppm_fresh if we receive a new PPM packet in order to keep the
...
rfm22b receiver supervisor happy.
2013-05-06 12:00:58 +02:00
Richard Flay (Hyper)
fbc8bc698f
OP-936: Merges branch 'next' into hyper/OP-936_task-monitor-rework, fixes damage/conflicts,
...
and brings the callback scheduler into the fold.
+review OPReview-461
2013-05-06 19:11:14 +09:30
Werner Backes
0005d643ca
Merge branch 'D-Lite/OP-934_rfm22b_rcvr_timeout_handling' into D-Lite/OP-934_rfm22b_rcvr_timeout_handling_next
2013-05-06 08:23:22 +02:00
Brian Webb
ae8286e99a
OP-932: Fixes a bug that was preventing setting of Tx power on remote modem.
2013-05-06 01:03:15 +01:00
Richard Flay (Hyper)
a2d8544931
OP-931: adds -Wextra compiler option for the flight code, and makes the bazillion code changes required
...
to make the flight code compile again. Needs careful review, particularly all the fixes for the
signed vs unsigned comparisons.
+review OPReview-459
2013-05-05 16:32:24 +09:30
Brian Webb
dc4455ff68
OP-932: Fixes a bug that was preventing setting of Tx power on remote modem.
2013-05-04 17:24:40 +01:00
Brian Webb
57552f4cc9
OP-932: Changed the clock syncronization to happen only on packts transmitted from the coordinator to the remote modem. The Tx finished time of the previous packet is now sent in the packet header. This is compared to the Rx complete time of that packet on the remote modem to calcualte the difference between two modems. This eliminates the need for ACKing, so ACKs were removed for PPM and status packet.
2013-05-04 16:50:08 +01:00
Richard Flay (Hyper)
87fcf9fa8b
Merge branch 'next' into hyper/OP-931_extra_compiler_warnings and update as necessary.
...
Hopefully properly fixes conflicts:
flight/modules/Attitude/attitude.c
flight/modules/ManualControl/manualcontrol.c
flight/modules/Osd/WavPlayer/wavplayer.c
flight/modules/Osd/osdgen/osdgen.c
flight/modules/System/systemmod.c
ground/uavobjgenerator/generators/flight/uavobjectgeneratorflight.cpp
2013-05-04 11:12:44 +09:30
Brian Webb
33cb06b1b0
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into OP-932-Modularize_Radio_Driver
2013-05-04 01:30:01 +01:00
Oleg Semyonov
137ddbf73a
Fix broken unit tests
2013-05-03 20:27:03 +02:00
Oleg Semyonov
7aa59f4573
pios.h: only include STM32xxx.h if particular STM32 MCU is defined
2013-05-03 20:25:48 +02:00
Brian Webb
12e8adbdc4
OP-932: Fixes vitual com port and (not tested) raw comms over a UART on the OPLink.
2013-05-03 14:46:01 +01:00
Brian Webb
84a0f981e0
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into OP-932-Modularize_Radio_Driver
2013-05-03 14:08:40 +01:00
Richard Flay (Hyper)
84e1a81f8b
OP-936: Moves the task monitor code out of the flight library and into PiOS.
...
This move and rework also breaks the dependency of the task monitor on the UAVO subsystem,
and pushes the responsibility for updating the TaskInfo UAVO into the System module.
+review OPReview
2013-05-03 07:01:14 +09:30
Werner Backes
b48665e59b
rfm22b receiver supervisor now properly indicates a timeout condition.
...
This allows upper layers to recognize control signal loss.
2013-05-02 12:57:00 +02:00
Sambas
f7b9223827
Merge remote-tracking branch 'remotes/origin/next' into sambas/diffnext
...
Conflicts:
flight/modules/System/systemmod.c
shared/uavobjectdefinition/taskinfo.xml
2013-05-02 09:00:12 +03:00
Brian Webb
80cef9dbcc
OP-932: Fixes vitual com port and (not tested) raw comms over a UART on the OPLink.
2013-05-02 04:23:26 +01:00
Brian Webb
d8b09f132f
OP-932: Removes requirement to ACK PPM packets.
2013-05-01 15:28:33 +01:00
Brian Webb
344e5cbb66
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into OP-932-Modularize_Radio_Driver
2013-05-01 14:38:28 +01:00
Brian Webb
8c763c8ed3
OP-932: Improves the timing of channel changes on the radio device.
2013-05-01 14:37:47 +01:00
Oleg Semyonov
654dd051c7
Merge remote-tracking branch 'origin/next' into os/debug-pins
2013-05-01 11:13:30 +02:00
Brian Webb
a7d606dfe9
OP-932: Syncronize start of transmissions using the same coordinated clock as used by FHSS.
2013-05-01 03:46:46 +01:00
Brian Webb
2201d9d2bb
OP-932: Continued cleanup and modularization of radio code. Also fixed a bug that held the SPI lock when an error occured in an Rx.
2013-05-01 03:14:35 +01:00
Brian Webb
ef18319306
OP-932: Continued cleanup and modularization of the RFM22B radio code. Low-level radio driver has mostly been split out of the higher-level state machine.
2013-05-01 03:14:23 +01:00
Brian Webb
94cb92f410
OP-932: Additional restructuring of radio code.
2013-05-01 03:14:11 +01:00
Brian Webb
cb24d3266e
OP-932: Hold SPI bus semephore through multiple read/write transactions.
2013-05-01 03:13:58 +01:00
Brian Webb
8c59271d48
OP-932: Store the device status in bitfields with meaningful names.
2013-05-01 03:13:48 +01:00
Brian Webb
c3ea1bf3c0
OP-932: Fixed GPIO debugging on RevoMini (both V1 and V2)
2013-05-01 03:13:36 +01:00
Brian Webb
39c6e81d07
OP-924: Ensures that the PPM pulse turns off between PPM frames.
2013-05-01 02:48:48 +01:00
Brian Webb
76e4638b8f
OP-924: Added back setting of Tracking to true when a new sample is set.
2013-05-01 02:48:46 +01:00
Brian Webb
56a524ab9e
OP-924: Completely turn off PPM output when it's not being refreshed. Also fixed testing of PPM input on the OPlink that was broken when the return values were changed to negative values. The PPM values were being stored in an unsigned datatype, which made detecting negative error returns impossible.
2013-05-01 02:48:45 +01:00
Brian Webb
ab926da507
OP-924: Added a supervisor timeout to the PPM output driver. This is based on the code in the PPM input driver. A (minor) uninitialize variable bug was also fixed in the PPM input driver.
2013-05-01 02:48:44 +01:00
Alessio Morale
37a0d2c99e
OP-917 included a "compatibility" linker script used by the bootloader updater to ensure its compatibility with previous bootloader versions
...
+review OPReview-456
2013-05-01 01:14:30 +02:00
Alessio Morale
d79887d223
OP-917 relocate IRQStack to CCSRAM
...
+review OPReview-456
2013-05-01 01:11:17 +02:00
Richard Flay (Hyper)
7937ae6296
OP-931: Makes flight code compile with -Wfloat-equal and -Wunsuffixed-float-constants enabled.
...
Also fixes warnings (and bugs) in F4 STM32_USB_OTG_Driver code, allowing -Werror to be enabled for all flight code.
Fixes all other compiler warnings that would otherwise cause the flight code to not compile with -Werror enabled.
Along the way, this also adds some uses of isnan() to various places rather than questionable tests for x != x and
x == x to check for NaNs.
+review OPReview
2013-04-30 20:36:42 +09:30
Alessio Morale
41ecc09c3f
OP-917 Various review fixes:
...
-Fixed casing for PIOS_BL_HELPER_FLASH_ERASE_BOOTLOADER
-fixed wrong condition in f1 bl_helper
-other cosmetic changes and use of stdbool in f1 pios_bl_helper
-remove now unused macros
+review OPReview-456
2013-04-28 10:19:08 +02:00
Richard Flay (Hyper)
80c917591e
Cherry-pick and hand-merge of Sami's math cleanup commit from branch sambas/diffnext: 5f3e0c3e1d
2013-04-28 10:45:28 +09:30
sambas
5f3e0c3e1d
Math cleanup
2013-04-27 16:30:02 +03:00
Alessio Morale
78498910cf
OP-917 Moved all the flash architecture related code to pios_bl_helper, get the flash addresses from board defines, major cleanup.
...
+review OPReview
2013-04-27 15:15:28 +02:00
sambas
9fec3f5567
Merge remote-tracking branch 'remotes/origin/next' into sambas/diffnext
2013-04-27 13:39:58 +03:00
Richard Flay (Hyper)
fd1181959c
Merge branch 'hyper/OP-913-flight-uavo-alignment' into next
2013-04-27 18:19:01 +09:30
Brian Webb
bb6986ea04
OP-914 - Converted PIOS_RFM22B_Validate back into a normal function from an inline.
2013-04-27 01:45:19 +01:00
Brian Webb
a9079bfb7e
OP-914: Additional cleanup of the RFM22B driver code. Updated to code to the current coding standard. Added Doxygen documentation. Rearranged functions into functional groups to simplify reading the code.
2013-04-27 01:44:55 +01:00
Brian Webb
77b99cdafa
OP-914 - Converted PIOS_RFM22B_Validate back into a normal function from an inline.
2013-04-27 01:44:39 +01:00
Oleg Semyonov
47619c9937
Make F4 pios debug pins compilable, still should be revised for real use
2013-04-26 21:04:10 +03:00
Oleg Semyonov
45f456580f
Fix pios debug pin functions and defines (thanks to Mathieu for the patch)
2013-04-26 18:18:31 +03:00
Oleg Semyonov
18f7d7488b
Fix directory name case for merged sambas/diffnext
2013-04-26 17:07:44 +03:00
Oleg Semyonov
e2fd821e97
Merge remote-tracking branch 'origin/next' into sambas/diffnext
...
Conflicts:
make/common-defs.mk
2013-04-26 16:31:19 +03:00
Oleg Semyonov
7d5d513e75
Move flight/PiOS.osx->flight/pios/osx
...
It did not work and and is not fixed yet. But at least it is in place now.
2013-04-25 13:23:47 +03:00
Oleg Semyonov
9a53843168
Move flight/PiOS.win32->flight/pios/win32
...
It did not work and and is not fixed yet. But at least it is in place now.
2013-04-25 13:19:06 +03:00
Oleg Semyonov
b6e1331e5d
Rename flight/PiOS->flight/pios
2013-04-25 13:13:41 +03:00