1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-04 12:24:11 +01:00
Commit Graph

78 Commits

Author SHA1 Message Date
Corvus Corax
aa69027cb2 Merge branch 'next' into CC_GPS 2011-11-11 11:44:11 +01:00
Oleg Semyonov
f5e82b8242 spektrum: rename Spektrum to DSM (DSM2/DSMJ/DSMX used by Spektrum and JR radios)
No code changes, just file, variable and define names are changed.

First, it better describes the serial protocol used by DSMx satellite
receivers. Second, many people using Spektrum radio, assume Spektrum
protocol. This is the attempt to address those inaccuracies.
2011-11-04 21:40:34 +02:00
Oleg Semyonov
8ed23c76b7 spektrum: fix OpenPilot MB target (deprecated) after spektrum changes 2011-11-04 20:43:49 +02:00
Oleg Semyonov
62bca651d5 spektrum: alternative DSMx (DSM2/DSMJ/DSMX) driver
- does not glitch when used in 2-frame mode (DM9, 9503, etc)
- does NOT provides yet DSMX stream decoding - do NOT merge
- uses a bit more time in the interrupt, but frees 16 bytes of RAM.
  This is done to help decoding the weird DSMX stream which does not
  contain explicit resolution/frame/lost frames info and needs special
  processing (to be done yet).
2011-10-21 23:35:17 +03:00
Oleg Semyonov
53c098dd08 Merge branch 'next' into os/GPS-on-CopterControl_next_v2
Conflicts:
	flight/OpenPilot/System/pios_board.c
	flight/OpenPilot/UAVObjects.inc
	shared/uavobjectdefinition/hwsettings.xml
2011-09-28 22:02:02 +03:00
James Cotton
01cd2ded57 Mainboard config: The rcvr port is used for PPM/PWM/Spektrum so make these one
setting that is mutually exclusive.
2011-09-10 14:20:51 -05:00
James Cotton
4847a04db8 Mainboard: Get PWM working again. Had to add extra timer IRQ handlers for
TIM5-8.  Also TIM1 was not handled probably (for CC either) as the name of the
IRQ is TIM1_CC and TIM1_UP for the capture compare versus update.  I haven't
checked the downstream code that the registers it uses to map from a context to
event is invariant under timer channel.
2011-09-10 14:20:40 -05:00
James Cotton
eb191d869a Mainboard: Get spektrum working again. 2011-09-10 14:19:54 -05:00
Stacey Sheldon
1e9bcf8426 openpilot: fix merge of unidirectional gps feature branch 2011-09-04 23:22:29 -04:00
James Cotton
b1e0366525 Merge remote-tracking branch 'origin/CorvusCorax_unidirectional-GPS-com' into next
Conflicts:
	flight/OpenPilot/System/pios_board.c
2011-09-04 13:33:52 -05:00
Stacey Sheldon
86ce79af1d openpilot: fix compile error on OP 2011-08-31 21:43:57 -04:00
Stacey Sheldon
2f86e4dd4f Make PWM/PPM and Servo drivers play nicely together
PWM and PPM can now coexist in the same load and be
selected at boot time via the hwsettings UAVObject.

This is basically a complete restructuring of the
way the drivers interact with the TIM peripheral in
the STM32.

As a side effect, the PWM and PPM drivers are now
ready to support multiple instances of each.

This also provides the first step toward being able
to reassign some of the PWM input pins to be servo
output pins.  Still more work required, but this is
a good start.
2011-08-27 21:39:56 -04:00
James Cotton
dc340596f5 Merge branch 'next' into GCS_ChangesToUI-RuntimeCFG
Conflicts:
	flight/CopterControl/Makefile
	flight/OpenPilot/System/pios_board.c
	flight/OpenPilot/UAVObjects.inc
	flight/PiOS/STM32F10x/pios_spektrum.c
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configgadget.qrc
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
	shared/uavobjectdefinition/hwsettings.xml
2011-08-27 15:26:05 -05:00
Corvus Corax
4bd72923e5 Merge branch 'CorvusCorax_unidirectional-GPS-com' into CC_GPS
Conflicts:
	flight/Modules/GPS/GPS.c
	flight/Modules/GPS/GTOP_BIN.c
	flight/Modules/GPS/NMEA.c
	shared/uavobjectdefinition/hwsettings.xml
2011-08-25 15:33:23 +02:00
Corvus Corax
dfdea16065 Modules/GPS: Make GPS COM unidirectional (rx only) and use smaller, runtime allocated heap buffers 2011-08-25 14:46:30 +02:00
James Cotton
e4e952f270 Manual control settings needs to be initialized in OpenPilot board file for
spektrum to work
2011-08-21 02:21:09 -05:00
Corvus Corax
53d0732fc6 Enable GPS module as "optional module" in CooterControl 2011-08-20 01:25:49 +02:00
Corvus Corax
85aef9c7b4 OpenPilot: bugfix: Add GPS tx buffer by default (needed until GPS has been refactored to not send or only send when configured so) 2011-08-19 20:22:05 +02:00
Stacey Sheldon
06cdeb7b61 rcvr: support multiple simultaneous receivers
Now also supports multiple instances of the Spektrum driver.
These are configured as Spektrum1 and Spektrum2.
2011-08-02 01:22:04 -04:00
James Cotton
2e5a36a4db Merge branch 'stac/refactor-usart-com' into camera_stabilization 2011-07-30 10:55:16 +09:00
James Cotton
b2d2114ede Disable auto registration of all objects. Later the uavobj_init linker scripts
should be deleted to not carry around old code.
2011-07-30 10:24:46 +09:00
Stacey Sheldon
c2fb0d8b43 com: allow run-time allocation of buffers 2011-07-29 15:33:14 -04:00
Stacey Sheldon
5f8760a55c com: Move buffering out of USART/HID layer and into COM layer
This allows the spektrum and sbus receiver drivers to bind
directly to the usart layer using a properly exported API
rather than overriding the interrupt handler.

Bytes are now pushed directly from the usart layer into the
com layer without any buffering.  The com layer performs all
of the buffering.

A further benefit from this approach is that we can put all
blocking/non-blocking behaviour into the COM layer and not
in the underlying drivers.

Misc related changes:
 - Remove obsolete .handler field from irq configs
 - Adapt all users of PIOS_COM_* functions to new API
 - Fixup callers of PIOS_USB_HID_Init()
2011-07-27 19:45:38 -04:00
Stacey Sheldon
6580462916 rcvr: specify drivers for groups of channels
Each channel was previously tracking a separate driver.
Now, channels are grouped within a channel group to save
RAM used for tracking and to better reflect how channels
are actually mapped.
2011-07-14 23:22:42 -04:00
James Cotton
557771d3ef Change to OP MB code to make it work with input changes. Previously tried to
register every possible input channel.  Slipped through review because
"obviously correct" change fixed previous bug masking this.  Woohoo testing :)
2011-07-12 11:41:21 -05:00
Stacey Sheldon
b86ef4de82 bootcfg: fix incorrect bounds checking on rcvr registration
This was preventing any receivers from registering their
channels.
2011-07-07 23:59:12 -04:00
Stacey Sheldon
226f095a2e bootcfg: remove baudrate #defines for USARTs
The initial baud rates of each interface are now forced in the
board init code.

Any modules using USARTs should have fields added to
their settings object to allow the user to change the
baud rate from the default by using the COM layer APIs.

Developers requiring custom baud rates before the settings
objects are in place should locally edit the cfg structs
to specify the desired baud rates.
2011-07-06 23:03:54 -04:00
Stacey Sheldon
e82539c654 bootcfg: additional validation during board init 2011-07-06 22:34:59 -04:00
Stacey Sheldon
dbf7574946 bootcfg: use UAVobj to control boot-time HW config
This should mark an end to the compile-time selection of HW
configurations.

Minor changes in board initialization for all platforms:
 - Most config structs are marked static to prevent badly written
   drivers from directly referring to config data.
 - Adapt to changes in .irq fields in config data.
 - Adapt to changes in USART IRQ handling.

Major changes in board initialization for CC:
 - Use HwSettings UAVObj to decide which drivers to attach to
   the "main" port and the flexi port, and select the appropriate
   device configuration data.
 - HwSettings allows choosing between Disabled, Telemetry, SBUS,
   Spektrum,GPS, and I2C for each of the two ports.
 - Use ManualControlSettings.InputMode to init/configure the
   appropriate receiver module, and register its available rx channels
   with the PIOS_RCVR layer.  Can choose between PWM, Spektrum and PPM
   at board init time.  PPM driver is broken, and SBUS will work once
   it is added to this UAVObj as an option.
 - CC build now includes code for SBUS, Spektrum and PWM receivers in
   every firmware image.

PIOS_USART driver:
 - Now handles its own low-level IRQs internally
 - If NULL upper-level IRQ handler is bound in at board init time
   then rx/tx is satisfied by internal PIOS_USART buffered IO routines
   which are (typically) attached to the COM layer.
 - If an alternate upper-level IRQ handler is bound in at board init
   then that handler is called and expected to clear down the USART
   IRQ sources.  This is used by Spektrum and SBUS drivers.

PIOS_SBUS and PIOS_SPEKTRUM drivers:
 - Improved data/API hiding
 - No longer assume they know where their config data is stored which
   allows for boot-time alternate configurations for the driver.
 - Now registers an upper-level IRQ handlerwith the USART layer to
   decouple the driver from which USART it is actually attached to.
2011-07-05 22:03:25 -04:00
Stacey Sheldon
6415fc84a5 rtc: allow registration of callbacks on RTC tick
This separates the RTC device and interrupt handling
from the devices that rely on the tick notifications.

Drivers can now register tick notification functions
that will be called on each RTC tick event.
2011-07-05 22:03:25 -04:00
Stacey Sheldon
740b5f1584 rcvr: convert PWM, PPM, SBUS and Spektrum to use PIOS_RCVR
All receivers now fall under the same driver API provided
by pios_rcvr.c.

This is part of a larger sequence of commits that will
switch the receiver selection over to boot time dynamic
configuration via UAVObjects.
2011-07-05 22:03:25 -04:00
Oleg Semyonov
d8201ec45b sbus: provide a stub based on Spektrum driver (for CC only) 2011-06-15 22:35:21 +03:00
sambas
17fb31a7fa Spektrum rtc supervisor working, tested on CC and all outputs are activated. Needs review and testing before merge. 2011-05-29 14:52:22 +03:00
James Cotton
bdf862a712 PIOS/RTC: Add functions to get the rate. Also changed Start to Init to be more
consistent with pios.
2011-05-18 01:45:21 -05:00
sambas
dabc33c71c OP-22 Flight/PiOS: fix for 11ms framerate, Spektrum supervisor timer must have atleast one interrupt between frames
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3134 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-04-09 14:51:39 +00:00
sambas
0eeacb44bd PPM driver for OP, first test
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3007 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-08 18:08:13 +00:00
FredericG
5f52ef6aaa fix: PIOS_DEBUG_Init() was no longer called
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2970 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-05 09:21:32 +00:00
FredericG
ec634ef3e7 debug-pins, small fix
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2808 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-19 09:11:00 +00:00
sambas
f3bce1705b OP-22 Flight/PiOS: Spektrum fix, OP tested on ground not flown yet, CC not tested.
pios_rcinput.[ch] outdated

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2775 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-13 13:10:02 +00:00
stac
66a9d53d0a hwinit: Convert I2C driver to dynamic init
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2773 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-12 22:19:54 +00:00
stac
3fda65c5d3 hwinit: Convert SPI drivers to dynamic init
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2772 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-12 22:19:50 +00:00
stac
841b0d3d6d hwinit: Convert COM and USART to dynamic init
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2771 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-12 22:19:43 +00:00
stac
4e6b539086 debugpins: Add definitions for debug pins
Not yet used anywhere but will eventually allow
debug pins to be assigned during runtime init based
on configuration found in a new uavobject.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2741 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-06 01:03:06 +00:00
peabody124
ac031d9b0d OP-256 RC 3 is using TIM5 but wasn't previously handling this ISR. Passing to
the PWM ISR now.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2607 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-28 16:01:40 +00:00
sambas
d917ced2f6 Fix for pwm input reset problem? Try the line I commented out because I can't test this.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2606 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-28 13:30:12 +00:00
sambas
195b63b6bb OP-22 PIOS/Spektrum: Made spektrum input driver, NOT YET TESTED!!!, also preliminary support for CC, sync/supv timer not yet fixed.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2602 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-28 09:25:30 +00:00
peabody124
92dd78db51 OP-256 PIOS/PWM: Disable from the pios_board.c file when not using PWM
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2589 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 23:17:39 +00:00
peabody124
3b0be12b67 OP-291 PIOS/Servo: Fix a few interrupt mappins for OP
Also keep the priority of actuator at idle+4, dropping it down slipped through

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2580 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:52:20 +00:00
peabody124
7554021ed0 OP-256 PIOS/PWM: Set the interrupts correctly
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2577 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:52:11 +00:00
peabody124
99fcd089d4 OP-291 PIOS/Servo: Make the remapping of timers a part of the driver structure
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2569 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-01-24 07:51:48 +00:00