rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-11 19:24:10 +01:00
Code Issues Releases Activity
14,923 Commits 5 Branches 8 Tags 266 MiB
ad0d18cfef
Commit Graph

88 Commits

Author SHA1 Message Date
Laurent Lalanne
cff5dac088 LP-407 Add Rssi input value - ReceiverActivity: Ignore Rssi channel if already set 2016-09-14 15:23:20 +02:00
Laurent Lalanne
5895468f08 LP-298 Port Ibus Input driver from dRonin - Not tested 2016-08-03 19:09:05 +02:00
Brian Webb
a0279b272f LP-190: Initial checkin that adds OpenLRS receiver support to Revolution and OPLinkMini. 2016-07-12 17:45:33 -07:00
Cliff Geerdes
3115711049 LP-72 DSM PPM Voltage and Current sensors coded but not tested 2016-05-25 13:51:36 +02:00
Fredrik Arvidsson
02c981388a Merge branch 'thread/LP-196_Jeti_Ex_Bus_15.09' into thread/LP-104_LP-196_HoTT_and_Ex.Bus_Support_15.09 
# Conflicts:
#	flight/targets/boards/coptercontrol/board_hw_defs.c
#	flight/targets/boards/coptercontrol/firmware/pios_board.c
#	flight/targets/boards/revolution/board_hw_defs.c
#	flight/targets/boards/revolution/firmware/inc/pios_config.h
#	flight/targets/boards/revolution/firmware/pios_board.c
#	flight/targets/boards/revonano/firmware/inc/pios_config.h
#	flight/targets/boards/revonano/firmware/pios_board.c
#	shared/uavobjectdefinition/hwsettings.xml
#	shared/uavobjectdefinition/manualcontrolsettings.xml
#	shared/uavobjectdefinition/receiveractivity.xml
 2016-01-09 16:59:24 +01:00
Fredrik Arvidsson
c48c46b8ef LP-196 Cleaned up some configuration. Ex.Bus only available on Flexiport. 2016-01-09 16:07:13 +01:00
Fredrik Arvidsson
6a3a822c87 LP-104 Cleaned up configuration. Only Allow HoTT on flexi port. 2016-01-09 15:50:52 +01:00
Fredrik Arvidsson
3e920bc5bc LP-196 Added driver for Jeti EX.Bus protocol. Added support for CopterControl target on Main and Flexi port. This is WIP and not tested yet. 2015-12-26 12:29:04 +01:00
Fredrik Arvidsson
e6d4638201 LP-104 Adds support for Graupner HoTT SUMD/SUMH serial protocol used by receivers on Main and Flexi port. 
Still work in progress. Only supports CopterControl target and crashes on input :(
 2015-12-20 11:08:15 +01:00
Laurent Lalanne
8885180fde LP-114 Add Accessory3 as input - TxWizard and Multirotor Accessory 
mapping
 2015-09-11 00:04:31 +02:00
Laurent Lalanne
69125e8e9d LP-44 Save RAM : Use float UAVO type only when needed. 184bytes saved 2015-09-03 07:26:06 +02:00
m_thread
b0b1a42aec OP-1837 This change adds support for the Multiplex SRXL v1 and v2 protocols. 
Protocol version is autodetected and 12 or 16 channels are supported.
SRXL is available on Flexiport of Revolution board.
 2015-04-26 15:04:52 +02:00
abeck70
b1c94e83d0 gpsassist: One commit new branch 
Collapsed into one branch for a new code review.  Some unnecssary committed files removed.
 2015-01-08 13:20:47 +11:00
Laurent Lalanne
a55aff2723 Deadband by default, fix value. Should be 0.02 for 2% 2014-11-02 16:15:33 +01:00
Fredrik Larsson
77d11eafe7 Deadband by default, will be detected and overwritten by new TX wizard 2014-11-02 11:53:53 +11:00
Corvus Corax
1898d0ad35 OP-1217 create new receiver module 
This module includes all the receiver IO and parsing/failsafe
functionality of ManualControl, but does none of the interpretations in
regards to flight mode / actuator control or arming that was included in
the old ManualControl

In a second step the old ManualControl module needs to be adapted to do
only these ommitted things in a modular way - as a delayed callback
 2014-02-16 15:09:08 +01:00
Corvus Corax
b5a27d05e7 OP-1197 configurable failsafes OP-1219 thrust control OP-1217 separate manualcontrolsettings apart 2014-02-09 19:37:22 +01:00
Alessio Morale
831817e15d OP-1022: reenable AH/AVario modes from "Flight Mode Switch Settings" GUI 2014-01-18 17:28:43 +01:00
Cliff Geerdes
56b4d8647f OP-1117 Rename Horizon to Rattitude, Anti Windup and dT additions 2013-12-18 05:01:16 -05:00
Cliff Geerdes
150dbebc63 OP-1117 MultiWiiHorizon flight mode only (not cliffs H1 or H2) 2013-12-15 22:02:06 -05:00
Corvus Corax
50561bfb5f made arming/disarming sequence time configurable - useful for heli pilots that like almost-instant disarm 2013-07-18 13:13:23 +02:00
Corvus Corax
114e25ff5d cleaned up code for armin/disarming and got rid of a bunch of assumptions 2013-07-18 13:05:37 +02:00
Corvus Corax
658b2fc804 cherry-pick of Sambas Arm-On-A-Switch capability implementation 2013-07-18 10:45:36 +02:00
Corvus Corax
8b6510da4f Made AltitudeOffset for ReturnToHome configurable, Made Failsafe-FlightMode configurable. 2013-07-15 09:14:09 +02:00
Corvus Corax
0c43346292 Merge branch 'corvuscorax/OP-947_stateestimator-module' into next 
Thanks everyone for helping getting this together, especially Alessio
and DLite :-)
 2013-06-25 23:48:12 +02:00
Oleg Semyonov
9fce86b662 Temporary disable AltitudeHold and AltitudeVario flight modes 
They were not officially supported. But since people expected the
well-known production quality behavior, it is better to make them
final, then reenable.
 2013-06-24 18:08:02 +03:00
Corvus Corax
6f38e26a53 Categorizing all UAVObjects into 5 main categories: 
State, Sensors, System, Navigation, Control
 2013-06-22 19:58:54 +02:00
Alessio Morale
5318c20de6 OP-1019 add a simple altitude hold 2013-06-20 11:27:45 +02:00
Fredrik Arvidsson
316afefff7 OP-906 Changed defaults for Stabilization settings and Flight modes. 2013-05-27 22:25:17 +02:00
Sambas
f65fbd7c8a Revert revo flight modes 2013-05-02 13:38:44 +03:00
sambas
731ee3e19d Merge remote-tracking branch 'remotes/origin/next' into sambas/diffnext 
Conflicts:
	shared/uavobjectdefinition/manualcontrolsettings.xml
 2013-04-22 21:29:04 +03:00
Oleg Semyonov
2d9a2ef712 OP-897: fix formatting +review OPReview-438 2013-04-09 01:11:02 +03:00
Oleg Semyonov
f260b2f568 OP-897: remove non-user-selectable modes from GCS dropdown lists 
Now all unsupported options are disabled. They will be reenabled when
ready for end users. Still developers can set them using UAVObjBrowser.

As a side effect, a bit changed UAVO XML definitions. The "limits"
option now uses comma to separate rules, semicolon to separate elements.
Was vice versa.

OP-897 #resolve #comment Pushed for review
+review OPReview
 2013-04-06 19:01:12 +03:00
sambas
77cae9ffc3 MagBaro Extension board module 
OSD update
OSD output module for FC
Sonar update
Flight mode fixes + poi
 2013-03-28 18:20:50 +02:00
David Willis
7a4fcba285 Merge branch 'next' into dwillis/OP-792 
Conflicts:
	shared/uavobjectdefinition/manualcontrolsettings.xml

Merge next
 2013-02-26 23:57:06 +00:00
David Willis
d4ef4fb43f OP-792 Add autotune to list of excluded items for flight mode position 2013-02-19 23:43:03 +00:00
Brian Webb
a4faa22c4b Merge remote-tracking branch 'origin/brian/rfm22_autoconf' into next 
Conflicts:
	ground/openpilotgcs/src/plugins/config/configgadgetwidget.cpp
 2013-01-31 13:40:32 +00:00
Alessio Morale
f293298118 Merge remote-tracking branch 'origin/revo-fixes' into amorale/revo-merge 
Conflicts:
	flight/Modules/ManualControl/manualcontrol.c
	make/scripts/version-info.py
	package/Makefile.linux
 2013-01-19 20:23:48 +01:00
Brian Webb
3a1803b7a1 Added RFM22B (OPLink) receiver. 2012-12-13 21:07:19 -07:00
Oleg Semyonov
41d56b282e [OP-724] Remove LPF from throttle input channel (not necessary) 2012-12-02 13:50:03 +02:00
Oleg Semyonov
ee333f1569 [OP-724] Add manual control input filtering (useful for camera gimbal) 
This is a partial rework of Cossacs' camera gimbal software.

This patch adds LPF to some of manual control inputs. Mostly
useful are accessory channels (for camera gimbal control) and
yaw channel (for smooth filming). The code may be used for
stand-alone CC[3D]-based gimbal software, but also should work
for complete FC+camera system.
 2012-11-29 17:39:07 +02:00
Corvus Corax
4f601eafe7 OP-736 remove unsupported failsafe type from manualcontrolsettings. should only be readded once supported for safety reasons! 2012-11-22 11:22:07 +01:00
Stacey Sheldon
2119067722 Merge remote-tracking branch 'op-revo/james/revo' into revo-next 
Conflicts:
	Makefile
	flight/Modules/Attitude/revolution/attitude.c
	flight/Modules/Battery/battery.c
	flight/Modules/FixedWingPathFollower/fixedwingpathfollower.c
	flight/Modules/GPS/GPS.c
	flight/Modules/ManualControl/inc/manualcontrol.h
	flight/Modules/ManualControl/manualcontrol.c
	flight/Modules/OveroSync/overosync.c
	flight/Modules/PathPlanner/inc/pathplanner.h
	flight/Modules/PathPlanner/pathplanner.c
	flight/Modules/Sensors/sensors.c
	flight/Modules/VtolPathFollower/vtolpathfollower.c
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/PiOS/Boards/pios_board.h
	flight/PiOS/STM32F4xx/library.mk
	flight/PiOS/inc/pios_hmc5883.h
	flight/PiOS/inc/pios_l3gd20.h
	flight/PiOS/inc/pios_rfm22b_priv.h
	flight/Revolution/Makefile
	flight/Revolution/Makefile.osx
	flight/Revolution/System/inc/pios_config.h
	flight/Revolution/UAVObjects.inc
	ground/openpilotgcs/src/libs/utils/coordinateconversions.cpp
	ground/openpilotgcs/src/libs/utils/homelocationutil.cpp
	ground/openpilotgcs/src/libs/utils/homelocationutil.h
	ground/openpilotgcs/src/plugins/config/configrevowidget.cpp
	ground/openpilotgcs/src/plugins/hitlnew/il2simulator.cpp
	ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
	ground/openpilotgcs/src/plugins/plugins.pro
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
	package/Makefile
	shared/uavobjectdefinition/fixedwingpathfollowersettings.xml
	shared/uavobjectdefinition/fixedwingpathfollowerstatus.xml
	shared/uavobjectdefinition/flightstatus.xml
	shared/uavobjectdefinition/hwsettings.xml
	shared/uavobjectdefinition/manualcontrolsettings.xml
	shared/uavobjectdefinition/pathdesired.xml
	shared/uavobjectdefinition/vtolpathfollowersettings.xml
	shared/uavobjectdefinition/waypoint.xml
 2012-10-30 00:08:43 -04:00
Stacey Sheldon
754f58c33a Merge remote-tracking branch 'op-public/next' into revo-next 
Conflicts:
	flight/Modules/ManualControl/inc/manualcontrol.h
	flight/Revolution/Makefile.osx
	ground/openpilotgcs/src/plugins/plugins.pro
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
	ground/openpilotgcs/src/plugins/uploader/uploadergadgetwidget.cpp
	shared/uavobjectdefinition/flightstatus.xml
	shared/uavobjectdefinition/hwsettings.xml
	shared/uavobjectdefinition/manualcontrolsettings.xml
	shared/uavobjectdefinition/taskinfo.xml
 2012-09-16 09:56:35 -04:00
James Cotton
38e9d105aa Merge branch 'pidt1' into test2 
Conflicts:
	flight/Modules/ManualControl/inc/manualcontrol.h
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
	shared/uavobjectdefinition/flightstatus.xml
	shared/uavobjectdefinition/hwsettings.xml
	shared/uavobjectdefinition/manualcontrolsettings.xml
	shared/uavobjectdefinition/taskinfo.xml
 2012-09-10 14:37:52 -05:00
James Cotton
2f65fc1e8e Merge branch 'next' into relay_tuning 
Conflicts:
	shared/uavobjectdefinition/manualcontrolsettings.xml
	shared/uavobjectdefinition/taskinfo.xml
 2012-09-04 10:43:04 -05:00
Stacey Sheldon
1f1b240b2a Merge remote-tracking branch 'op-public/next' into revo-next 
Conflicts:
	shared/uavobjectdefinition/manualcontrolsettings.xml
	shared/uavobjectdefinition/taskinfo.xml
 2012-08-20 21:22:02 -04:00
James Cotton
5e61f66fc0 Messed up merge on manualcontrol settings 2012-08-12 14:44:54 -05:00
James Cotton
75db0fcb35 Merge branch 'next' into revo 
Conflicts:
	flight/Modules/GPS/GPS.c
	shared/uavobjectdefinition/manualcontrolsettings.xml
	shared/uavobjectdefinition/systemalarms.xml
 2012-08-12 14:38:38 -05:00
PT_Dreamer
df61d33f66 GCS- Added the ability to have more than 1 ui limit per index 2012-08-03 18:57:24 +01:00