rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-10 18:24:11 +01:00
Code Issues Releases Activity
4,049 Commits 5 Branches 8 Tags 266 MiB
c87a042195
Commit Graph

75 Commits

Author SHA1 Message Date
James Cotton
524cdf7743 OP-378: Start of IMU3000 fifo reading code 2011-05-31 01:51:05 -05:00
James Cotton
b6a8293f69 OP-378: Get BMA180 interrupt working. Data gets pushed onto a fifo that is 
pulled from in the INS code.
 2011-05-30 03:40:51 -05:00
James Cotton
ca2205d35f OP-378: Tweak INS stack definition to avoid faults 2011-05-26 16:02:15 -05:00
James Cotton
52e72f20e2 OP-378: Map gyros to board orientation 2011-05-26 16:01:10 -05:00
James Cotton
4a9e7604a1 OP-378: Push the sensor data into the UAVObjects, also hardcoded scaling 
(temporary).  For some reason it segfaults when EKF enabled so use simple mode
for now.
 2011-05-26 15:06:56 -05:00
James Cotton
eab8896f16 OP-378: INS code starts taking in sensors (timing not optimized at all yet) 2011-05-26 14:06:22 -05:00
Stacey Sheldon
4da671fc82 build: change firmware files from .opf to .opfw extensions 2011-05-25 00:20:02 -04:00
Oleg Semyonov
66804076b8 build: fix release/Makefile for *.opf files and changed targets 2011-05-24 23:49:51 -04:00
Stacey Sheldon
91cb294730 build: remove redundant PHONY for size target 2011-05-24 01:10:40 -04:00
Stacey Sheldon
0eb92fad91 build: refactor jtag program and add jtag wipe target 
Macros for JTAG program and wipe for each target are now
provided in firmware-defs.mk.

The _wipe target for each firmware and bootloader image will
erase either the bootloader (bl_*_wipe) or firmware (fw_*_wipe)
bank.
 2011-05-24 01:10:31 -04:00
Stacey Sheldon
6e406c0232 build: remove all remaining use of -DUSE_BOOTLOADER 
The USE_BOOTLOADER compile flag was only being used
to determine where the ISR vector table was located.

Provide this explicitly from the linker since it knows
exactly where it is putting the ISR vector table.
 2011-05-23 18:21:42 -04:00
Stacey Sheldon
0a67730d0f build: refactor fw, bl and bu rules 
- New macros for fw, bl and bu rules in top-level make
- Per-board info factored into make/board/*/board-info.mk
- Per-board info now shared btw. fw, bl and blupd for each board
   - BOARD_TYPE, BOARD_REVISION, BOOTLOADER_VERSION, HW_TYPE
   - MCU, CHIP, BOARD, MODEL, MODEL_SUFFIX
   - START_OF_BL_CODE, START_OF_FW_CODE
- blupd_* goals renamed to bu_*
- all_blupd goal renamed to all_bu
- firmware goals renamed to fw_*, board name goals are preserved
- bu_*_program now writes updater to correct address for all boards
- BL updater firmware builds now produce .opf format including
  version info blob.
- BL updater firmware name now includes board name.
- INS makefile brought up to date w.r.t. linker scripts
 2011-05-23 18:21:42 -04:00
Stacey Sheldon
6ec6425f5e build: build opf images including firmware + version blob 2011-05-22 10:55:13 -04:00
James Cotton
5d78a68bee OP-378: Got BMA180 working. 2011-05-19 11:36:43 -05:00
James Cotton
3093d26cf4 OP-378: Update BMP085 driver for convention that 0 is success, < 0 is failure 2011-05-19 11:36:32 -05:00
James Cotton
750097ea73 OP-378: Small changes to get drivers working again. Fix I2C port for IMU3000 
and change convention so that 0 is success, < 0 is error.
 2011-05-18 23:35:45 -05:00
James Cotton
ab3127a0ea OP-378 Update the INS Makefile for the new file formats 2011-05-18 14:39:38 -05:00
James Cotton
81b7fb6185 Merge branch 'master' into OP-378_James_INS 2011-05-18 12:50:29 -05:00
Oleg Semyonov
bac95dae11 OP-483: get rid of -D install switch (doesn't work on Mac) and use mkdir -p instead 2011-05-14 23:17:08 +03:00
Oleg Semyonov
37868a4c10 OP-483: add install target for firmware 
make INSTALL_DIR=dir INSTALL_PFX=pfx INSTALL_SFX=sfx install
installs binary file into specified install directory adding
optional prefix and/or suffix.
 2011-05-13 11:25:32 +03:00
sambas
d61f3d4d94 Merge branch 'OP-378_CheBuzz_INS' of ssh://git.openpilot.org/OpenPilot into OP-378_CheBuzz_INS 2011-05-07 18:26:12 +03:00
James Cotton
69d03ca101 OP-439: Simplify further. Abstract most of the OOCD flags into the common 
firmware include and delete all the extra foss-jtag config files.  There is now
a legacy file for the revA board a second for AHRS that changes the port
 2011-04-24 10:19:00 -05:00
Corvus Corax
ee7179bd53 OP-439 unified OpenOCD config for mac os x and Linux, Makefiles adapted accordingly 2011-04-24 12:10:33 +02:00
David Buzz Carlson
876ca3044c Added EKF code. Most of this was bulk copy and paste from the AHRS, so a lot of verification needs to take place. Grabbing sensor data remains untested. 2011-04-20 03:37:50 -07:00
chebuzz
06443b4281 OP-378 - OP/INS - Add initial support for INS. HMC5883, BMP085, BMA180, IMU300 all added. Throrough verification has not been done on any of them. main() simply calls self-test functions on all of the hardware. 
AHRS_comms still needs to be implemented.  INS/GPS functionality still needs to be implemented.  Double-check of the new drivers still needs to be done.


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3162 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-04-14 12:46:39 +00:00