1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-11 19:24:10 +01:00
Commit Graph

974 Commits

Author SHA1 Message Date
Stacey Sheldon
e5c54cca00 freertos: change default alignment to 4-byte from 8-byte
There shouldn't be any reason to need 8-byte alignment on the
F1 platform.  This allows better packing of all malloc'd data.

Reducing this below 4-byte alignment is not recommended and will
likely result in misaligned pointers being passed to peripherals.

RAM savings is another 300 bytes.
2012-11-11 22:16:00 -05:00
lilvinz
3db04ea174 pios_jedec: fixed usage of uninitialized memory
When reading the jedec device id the code only transfered one byte via spi leaving
the expected input buffer uninitialized. This may lead to the problem that flash
initialization fails because the expected input may be whatever the stack was set
when entering the function. The impact of the bug is somewhat limited tough as the
initialization usually takes place before starting up the rtos and thus is pretty
deterministic. So if the code passed init while testing it should pass init in
production as well.
2012-10-28 14:34:20 +01:00
Stacey Sheldon
6088c05946 console: add support for serial debug consoles
Serial ports now have a new HW setting called DebugConsole
which can be used to dump internal state to a serial port
for debug.

To enable this feature, you need to:
 - make fw_coptercontrol_clean
 - make fw_coptercontrol ENABLE_DEBUG_CONSOLE=YES
 - configure one of the serial ports as DebugConsole in the GCS
 - save settings
 - power-cycle your board

Things to note:
 - The console is at 57600,8N1.
 - This is not currently configurable via the GCS.
 - You can only have a single console enabled at a time.
2012-10-11 00:22:07 -04:00
sambas
9212bbeb20 DSMx bindmode delay was too long, satellite binding works again. 2012-10-07 12:09:42 +11:00
James Cotton
b0d8487e27 PIOS_RFM22: Make the irq return false for the exti changes 2012-09-28 02:14:15 -05:00
James Cotton
8979c00fba Merge branch 'exti_end_switching_isr' into next 2012-09-28 00:41:08 -05:00
James Cotton
519e3e2e3a PIOS_EXTI: Make the line task macro now take in the xHigherTaskPriority variable name 2012-09-28 00:40:36 -05:00
James Cotton
f12d5c04fb Merge remote-tracking branch 'origin/lilvinz/mpu6000_masked_locals_fix' into next 2012-09-27 14:43:54 -05:00
James Cotton
1ba40ee9b0 PIOS_EXTI: Make sure to use pdTRUE instead of true where appropriate. 2012-09-27 14:41:38 -05:00
James Cotton
1721479a12 Fix for vinz' merge to pios_mpu6000 exti changes 2012-09-27 14:34:11 -05:00
James Cotton
a021659b75 Merge remote-tracking branch 'origin/lilvinz/exti_end_switching_isr' into next 2012-09-27 14:31:16 -05:00
Stacey Sheldon
215ff56fe8 usbcdc: fix handling of CDC SET_LINE_CODING request
The SET_LINE_CODING request contains data and must be
handled as such.

Previously, the only requests that had data were IN
requests.  SET_LINE_CODING is an OUT request so it
required additional changes to support a new type of
data request.
2012-09-24 00:56:25 -04:00
Stacey Sheldon
5e37448814 usb: correct enum for CDC SET_CONTROL_LINE_STATE request 2012-09-24 00:53:52 -04:00
Stacey Sheldon
c056ac5261 usbcdc: don't assert on calls when CDC is not initialized
The CDC interface is always advertised in the FW USB
descriptors.  It is NOT always enabled/initialized at
runtime.  Specifically, it can be Disabled in HwSettings.

Previously, any CDC-related query that the host would send
resulted in an assert and a watchdog.

Now, a suitable return code indicating that the request is
unsupported is returned in this scenario.
2012-09-24 00:53:12 -04:00
lilvinz
a6a7ed8157 pios_exti: added returnvalues to exti handlers which allows to use portEND_SWITCHING_ISR 2012-09-16 21:44:09 +02:00
lilvinz
524cff1c40 pios_mpu6000: fixed masked locals mistake 2012-09-16 21:25:06 +02:00
lilvinz
718062ed6e pios_led: added support for active_high connected leds 2012-09-16 18:19:27 +02:00
James Cotton
9763a70364 Merge remote-tracking branch 'origin/igor/pidt1' into relay_tuning
Conflicts:
	flight/Modules/Stabilization/stabilization.c
2012-09-10 03:10:26 -05:00
Stacey Sheldon
97882dbef9 pipx: ensure pipx BL image is padded to fill its bank
This padding is required in order to properly align all
of the sections in the EF images.
2012-09-05 22:17:04 -04:00
James Cotton
2f65fc1e8e Merge branch 'next' into relay_tuning
Conflicts:
	shared/uavobjectdefinition/manualcontrolsettings.xml
	shared/uavobjectdefinition/taskinfo.xml
2012-09-04 10:43:04 -05:00
Stacey Sheldon
29ab1d8cf3 actuator: factor out settings updates from main loop 2012-08-11 19:46:00 -04:00
Stacey Sheldon
49c153003c hid joystick: use linearly scaled channels
Scales each channel only based on max and min calibrated values.
The neutral value is now ignored so the joystick sees a linear
range between min and max.

This is particularly useful to allow the full range of values for
throttle to be passed through to the joystick.
2012-08-10 23:36:06 -04:00
Stacey Sheldon
07fde38887 hid joystick: factor out min/max range from report items 2012-08-10 23:29:34 -04:00
Stacey Sheldon
5902c19cc3 hid joystick: compress local usages since they're all in the same page 2012-08-08 10:38:43 -04:00
Stacey Sheldon
030d9e84f9 hid joystick: remove unnecessary usage page definitions 2012-08-08 10:15:08 -04:00
Stacey Sheldon
449c7aab7a hid joystick: use 32-bits to represent max range 2012-08-08 00:50:03 -04:00
Stacey Sheldon
94f6344fc5 hid joystick: restructure joystick HID report to work on windows 2012-08-07 21:34:25 -04:00
Stacey Sheldon
017d8c79c9 hid joystick: add missing .c file
This time for sure...
2012-08-06 11:49:03 -04:00
Stacey Sheldon
d44e24a150 hid joystick: add missing .h files 2012-08-06 11:42:44 -04:00
Stacey Sheldon
ef0c12b1b6 hid joystick: emulate a USB HID joystick using RC Transmitter
Adds a new RCTransmitter setting for the USB HID interface which
emulates a USB HID joystick.  The scaled RC receiver channels
from any RCVR protocol are passed through to the various emulated
joystick controls.

The main use for this feature is to allow you to use your own RC
transmitter with any RC simulator on a PC.

This is known to work with CRRCsim but should work with any simulator
that supports joystick input.
2012-08-05 21:45:27 -04:00
James Cotton
652647fc87 Make autotuning module optional 2012-08-03 09:37:46 -05:00
James Cotton
719772c98a Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into next 2012-07-16 11:42:29 -05:00
James Cotton
ce6bebceb6 Also strex needs to not clobber it's register to have predictable results.
OPReview-227
2012-07-14 19:47:03 -05:00
Michael Hope
fa3aa20e05 ld: make sure current pointer never goes backwards
Fixes linking on ld version 2.22.  Identical to 3cbf4499.
2012-07-14 19:47:03 -05:00
Michael Hope
0efb24a54b The destination register of an exclusive store must be
different from both the value and address register.  Fix building with
recent binutils by marking the result as early clobber.
2012-07-14 19:47:03 -05:00
Brian Webb
3fabdb9963 Fixed conflicted merge with origin/next. 2012-07-11 19:25:05 -07:00
Stacey Sheldon
2396eaef5a uavobjectmanager: simplify new embedded metadata objects
Simplifies some of the code that handles the
metadata objects which are now embedded within
the data UAVOs.
2012-07-07 21:49:53 -04:00
Brian Webb
3405bc3ebe Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2 2012-06-30 10:06:51 -07:00
Brian Webb
10e52b31c5 Added the ability on the PipX to specify if a comport is used to connect to the GCS (ground side), so it will receive status, etc, or UAVTalk (flight side). The data passing in RadioComBridge was also made more uniform, which allows for easier reconfiguration. 2012-06-30 10:06:28 -07:00
Stacey Sheldon
154d971d4d flash: don't call vTaskDelay() before OS init
PIOS_Flash_Jedec_EraseChip is called during early
init when the table_magic has changed.  This call
happens on CC/CC3D prior to the OS being initialized
so it is not OK to call vTaskDelay() yet.

This was leading to boards locking up (no flashing blue
LED) immediately after jumping to the application when
the table_magic had changed or was being init'd for the
very first time.
2012-06-24 12:23:34 -04:00
James Cotton
93b77becc0 More the system task priority down and increase the timeout for erasing the
flash so it says completed.  However, it still blocks the system for a long
time.  During an erase the heartbeat will flash at 10 Hz to indicate what's
happening.

This still blocks telemetry even after lowering hte system priority (and there
is a vTaskDelay) which makes me think that the SPI bus being locked is blocking
Sensors or somethign else.  This should not be permited when the system is
armed.

The reason the system locks up during the erase is that the file system
operations occur within the event dispatcher thread.  It is very bad practice
for anything to block this (i.e. callbacks should never take very long).  We
should probably move the object persistence handling into the system thread or
something but that can be a separate issue.
2012-06-11 12:03:32 -05:00
James Cotton
7b8110a457 Merge branch 'MikeL' into next 2012-06-07 11:31:41 -05:00
Brian Webb
861bcc46fe Fixed RSSI reporting on PipX. 2012-06-06 21:14:31 -07:00
Brian Webb
e9d0909a68 Further improvements in link reliability on the PipX. 2012-06-06 17:44:56 -07:00
James Cotton
5e01617cbd Merge branch 'next' into MikeL
Conflicts:
	ground/openpilotgcs/src/plugins/config/airframe.ui
	ground/openpilotgcs/src/plugins/config/configoutputwidget.cpp
	ground/openpilotgcs/src/plugins/config/configoutputwidget.h
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.h
2012-06-06 11:58:06 -05:00
Brian Webb
5876df250d Improved lockups on dropped packets. 2012-06-05 21:10:32 -07:00
Brian Webb
25fe50e9b1 Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2 2012-06-04 18:26:05 -07:00
Mike LaBranche
0ba8345c51 Merge branch 'next' into MikeL
Conflicts:
	flight/Bootloaders/Revolution/inc/pios_config.h
	flight/Modules/OveroSync/inc/overosync.h
	flight/Modules/Sensors/inc/sensors.h
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/PiOS/STM32F4xx/pios_iap.c
	flight/Revolution/System/inc/pios_config.h
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
2012-06-04 16:59:31 -07:00
Mike LaBranche
bf591ebe45 Merge branch 'next' into MikeL
Conflicts:
	flight/Bootloaders/Revolution/inc/pios_config.h
	flight/Modules/OveroSync/inc/overosync.h
	flight/Modules/Sensors/inc/sensors.h
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/PiOS/STM32F4xx/pios_iap.c
	flight/Revolution/System/inc/pios_config.h
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
2012-06-04 15:38:57 -07:00
James Cotton
e8cf606f16 Add the chip size to the flashfs configuration (should probably go in the chip
configuration)
2012-06-02 11:00:42 -05:00