James Cotton
88b483f37d
PIOS_MPU6000: Make the driver perform the rotation to bring it into the OP
...
coordinate system
Previously there were hacks spread throughout to deal with various ways of
positioning the chips. Now the driver structure specifies the rotation
of the chip relative to the board layout and the output X/Y/Z are already
in OP convention.
This flag seems to do the right thing for Revolution, CC3D, and RevoMini
2012-09-11 01:46:22 -05:00
James Cotton
38e9d105aa
Merge branch 'pidt1' into test2
...
Conflicts:
flight/Modules/ManualControl/inc/manualcontrol.h
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
shared/uavobjectdefinition/flightstatus.xml
shared/uavobjectdefinition/hwsettings.xml
shared/uavobjectdefinition/manualcontrolsettings.xml
shared/uavobjectdefinition/taskinfo.xml
2012-09-10 14:37:52 -05:00
James Cotton
386a9d41ef
Merge branch 'next' into test2
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configrevowidget.cpp
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
ground/openpilotgcs/src/plugins/uavobjects/uavobjecttemplate.m
2012-09-10 14:29:26 -05:00
James Cotton
9763a70364
Merge remote-tracking branch 'origin/igor/pidt1' into relay_tuning
...
Conflicts:
flight/Modules/Stabilization/stabilization.c
2012-09-10 03:10:26 -05:00
James Cotton
527edcbee9
RFM22b: Get rid of the burst read commands and do a block transfer
2012-09-08 12:39:14 -05:00
James Cotton
1f0004e9db
RFM22b: Abstract out the port into the driver initiation
...
Also use a separate function to claim the bus semaphore and
assert the CS line.
2012-09-08 12:38:54 -05:00
Stacey Sheldon
97882dbef9
pipx: ensure pipx BL image is padded to fill its bank
...
This padding is required in order to properly align all
of the sections in the EF images.
2012-09-05 22:17:04 -04:00
James Cotton
68fa464ccf
RM: Make the direction of the TX/RX lines come from the configuration file
2012-09-04 23:22:56 -05:00
James Cotton
2f65fc1e8e
Merge branch 'next' into relay_tuning
...
Conflicts:
shared/uavobjectdefinition/manualcontrolsettings.xml
shared/uavobjectdefinition/taskinfo.xml
2012-09-04 10:43:04 -05:00
James Cotton
844d14e2f5
RM (NOT FOR PIPX) Properly select the GPIO->RX/TX mapping
2012-09-04 10:22:04 -05:00
James Cotton
0b947b243d
Revert "RFM22b: More block claims for rfm22_txStart"
...
This reverts commit fa4ca426abf5671fc7d0b7206f85f14bcbf92c3d.
2012-09-02 22:44:58 -05:00
James Cotton
dce4f36328
RFM22b: More block claims for rfm22_txStart
...
Warning: This patch makes the modem work more poorly
2012-09-02 22:44:58 -05:00
James Cotton
311bbcb539
RFM22b: Block transfers for more large SPI transfers
...
Preallocated buffers with various preambles etc. Used SPI_TransferBlock for
anything over a few bytes instead of burstWrite. Also make more of the
communications wrappered in a large semaphore grab using a new rfm22_write_noclaim()
Still needs work - probably because most of the methods to repeated calls they should
all use the noclaim, or more specifically that function becomes rfm22_write/read.
2012-09-02 14:35:56 -05:00
James Cotton
588297806c
RFM22b: Use SPI block transfers for filling the RFM22b FIFO
...
Also removed the disable irq line since that was introducing
flight glitches.
2012-09-01 21:24:42 -05:00
James Cotton
997319ae80
RFM22b: Begin doing blocks of transfers when possible between semaphore claims
...
The abstraction should probably be improved but ideally we start using
the DMA SPI transfers for PipX and grabbing/releasing the semaphore less
frequently (e.g. not for each 1-2 bytes).
2012-09-01 21:07:38 -05:00
James Cotton
d9ec6454c2
PipX: Since we are calling the PipX ISR from user space looks ensure the frequency stays correct.
...
Previously it was polling too fast and the PipXStatus was incorrect as a result. Now make
sure the stats loop only runs at 500 ms.
2012-09-01 19:13:11 -05:00
James Cotton
c9f66f5145
Merge branch 'revo' into revo-mini
...
Conflicts:
androidgcs/AndroidManifest.xml
androidgcs/res/layout/gcs_home.xml
androidgcs/res/values/strings.xml
androidgcs/src/org/openpilot/androidgcs/AttitudeView.java
androidgcs/src/org/openpilot/androidgcs/HomePage.java
flight/PipXtreme/System/pios_board.c
ground/openpilotgcs/src/plugins/uavobjectwidgetutils/configtaskwidget.cpp
shared/uavobjectdefinition/taskinfo.xml
2012-09-01 16:57:27 -05:00
James Cotton
6bfb2a5e45
Merge branch 'next' into revo
...
Conflicts:
ground/openpilotgcs/src/libs/opmapcontrol/src/mapwidget/mapgraphicitem.cpp
ground/openpilotgcs/src/libs/opmapcontrol/src/mapwidget/mapripper.cpp
ground/openpilotgcs/src/libs/opmapcontrol/src/mapwidget/waypointitem.cpp
ground/openpilotgcs/src/libs/opmapcontrol/src/mapwidget/waypointitem.h
ground/openpilotgcs/src/libs/utils/coordinateconversions.cpp
ground/openpilotgcs/src/libs/utils/coordinateconversions.h
ground/openpilotgcs/src/plugins/opmap/opmap.pro
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.h
ground/openpilotgcs/src/plugins/uavobjectwidgetutils/configtaskwidget.cpp
shared/uavobjectdefinition/taskinfo.xml
shared/uavobjectdefinition/waypoint.xml
2012-09-01 16:18:03 -05:00
James Cotton
f3327e3993
RM: Enabled optional modules and got the battery module working again.
...
Changed the hardcoded (ick) battery lines for RM. Also removed the reference
to PIOS_ADC_GetPin(4) as that pin is no longer available. Finally
changed the default FlightBatterySettings to work out of the box
for the standard recommended sensors.
2012-09-01 11:03:32 -05:00
James Cotton
300cee44b4
RM SBUS: There is no pull down on the inverter direction so when not SBUS must explicitly set to off.
2012-08-31 11:01:34 -05:00
James Cotton
b888a137f0
TOFIX: Temporarily remove the transaction lock from the settings as it was causing a deadlock with the radio coms.
2012-08-26 05:02:14 -05:00
James Cotton
042055b29a
RFM22b: Call the pendingISR routine from all the user space tasks. Got a valid connection with this.
2012-08-26 04:18:17 -05:00
James Cotton
f7cda1c0c4
RFM22b: No need to initialize the SPI. Done already.
2012-08-26 02:42:18 -05:00
James Cotton
477385ca25
RFM22b: Start to move the ISR into userspace
2012-08-26 02:41:19 -05:00
James Cotton
b1bd6d8583
PIOS_RFM22b: No need to set the SPI clock speed in the RFM22b module - it can be set by the driver configuration.
2012-08-26 00:00:39 -05:00
James Cotton
84d327c46a
RFM22b: Claim the bus semaphore before reading and writing.
2012-08-25 23:17:52 -05:00
James Cotton
2bb4f860e1
Shuffle around the PACKET_HANDLER definition so we can more easily disable the Radio module.
2012-08-25 22:58:11 -05:00
James Cotton
b95a78cde5
Roll back changes on the revo target
2012-08-25 17:33:14 -05:00
James Cotton
76bdb190d8
Link in the rfm module to the target
2012-08-25 17:27:17 -05:00
James Cotton
982750a58f
Merge remote-tracking branch 'revo/brian/revo_link' into revo-mini
...
Conflicts:
ground/openpilotgcs/src/plugins/plugins.pro
2012-08-25 15:05:47 -05:00
James Cotton
5c34412200
Merge remote-tracking branch 'revo/amorale/revolution_baro_fixes' into revo-mini
2012-08-25 14:55:10 -05:00
Brian Webb
415b86879c
Added the RFM22B driver to the Revo to support an RFM22B radio on the external SPI port.
2012-08-25 11:45:43 -07:00
Brian Webb
fad32dcc29
Split out the PipX radio interface from RadioComBridge module to a separate Radio module. Now the RadioComBridge module just routes messages between the com ports and handles sending/receiving the PipX UAVOs.
2012-08-25 11:41:32 -07:00
James Cotton
b9050809cc
Add a board info file for revo mini. However it was to remap the define MAINADAPTER for the HMC5883 driver which needs rewriting not to need this.
2012-08-25 12:57:50 -05:00
a*morale
789746151a
Fixes the selection of the oversample settings from the pios_ms5611_cfg.oversapling configuration
2012-08-25 11:29:01 +02:00
James Cotton
44dc01126e
Merge branch 'next' into revo
2012-08-12 16:12:54 -05:00
Stacey Sheldon
29ab1d8cf3
actuator: factor out settings updates from main loop
2012-08-11 19:46:00 -04:00
Stacey Sheldon
49c153003c
hid joystick: use linearly scaled channels
...
Scales each channel only based on max and min calibrated values.
The neutral value is now ignored so the joystick sees a linear
range between min and max.
This is particularly useful to allow the full range of values for
throttle to be passed through to the joystick.
2012-08-10 23:36:06 -04:00
Stacey Sheldon
07fde38887
hid joystick: factor out min/max range from report items
2012-08-10 23:29:34 -04:00
Stacey Sheldon
5902c19cc3
hid joystick: compress local usages since they're all in the same page
2012-08-08 10:38:43 -04:00
Stacey Sheldon
030d9e84f9
hid joystick: remove unnecessary usage page definitions
2012-08-08 10:15:08 -04:00
Stacey Sheldon
449c7aab7a
hid joystick: use 32-bits to represent max range
2012-08-08 00:50:03 -04:00
Stacey Sheldon
94f6344fc5
hid joystick: restructure joystick HID report to work on windows
2012-08-07 21:34:25 -04:00
Stacey Sheldon
017d8c79c9
hid joystick: add missing .c file
...
This time for sure...
2012-08-06 11:49:03 -04:00
Stacey Sheldon
d44e24a150
hid joystick: add missing .h files
2012-08-06 11:42:44 -04:00
Stacey Sheldon
ef0c12b1b6
hid joystick: emulate a USB HID joystick using RC Transmitter
...
Adds a new RCTransmitter setting for the USB HID interface which
emulates a USB HID joystick. The scaled RC receiver channels
from any RCVR protocol are passed through to the various emulated
joystick controls.
The main use for this feature is to allow you to use your own RC
transmitter with any RC simulator on a PC.
This is known to work with CRRCsim but should work with any simulator
that supports joystick input.
2012-08-05 21:45:27 -04:00
James Cotton
652647fc87
Make autotuning module optional
2012-08-03 09:37:46 -05:00
James Cotton
f02aacfeb6
Change the constant so LED flashing works properly on Revo
2012-07-28 11:22:24 -05:00
James Cotton
735c009843
Disable writing to the overo driver for every pios_com write again. It drives
...
up system consumption too much, although now data will get lost :(.
2012-07-25 13:15:47 -05:00
James Cotton
30085d23ff
Reenable sending from the overo tx method but no longer yield since we aren't
...
using a blocking write anyway.
2012-07-24 11:29:24 -05:00
