Stacey Sheldon
1532338847
ef: fix dependencies in entire flash image build
...
ef_$(BOARD_NAME).bin files were not properly depending
on their fw and bl files resulting in the ef files not
being regenerated.
2012-02-07 02:25:30 -05:00
James Cotton
3bb571a1a7
Delete overo stubs to move into submodule
2012-02-06 15:48:30 -06:00
zedamota
e2c6a9d58a
Added Dado's UI.
...
Several scale bug fixes.
Added lots of debug info, will clean later.
2012-02-06 17:33:54 +00:00
James Cotton
ae01936808
Add the portTickTime into the OveroSync stream
2012-02-06 10:00:02 -06:00
James Cotton
dbcb499d7f
Add object to monitor the overo link status. Current just records the bytes/s
...
being sent and the connected status (based on sending more than 500 bytes per
second)
2012-02-06 09:37:31 -06:00
Corvus Corax
b4a8eda8db
Merge branch 'corvuscorax/Smoothed_Scope' into next
...
Conflicts:
ground/openpilotgcs/src/plugins/scope/scopegadgetwidget.cpp
2012-02-06 16:35:13 +01:00
James Cotton
5b2376dbee
Remove the semaphore for buffer swapping and make this occur during the receive
...
ISR. This leads to a possible condition where a copy is taking place in
userspace and then a buffer swap interrupts it. However, the copy should
always finish before the SPI DMA slave catches up to that place in memory at 10
MHz.
This fixes a common condition where the userspace task (low priority) was not
swapping buffers in time from user space and logs were corrupted.
2012-02-06 08:21:24 -06:00
zedamota
35c5391d53
Corrected file headers
2012-02-05 20:07:19 +00:00
sambas
a263ee7885
unix:!mac should solve all problems
2012-02-05 21:45:47 +02:00
zedamota
6d6111b9ac
Moved framework to its own plugin
2012-02-05 18:16:38 +00:00
zedamota
32ebdb63a3
Preparatory commit before moving framework to a better location.
2012-02-05 14:41:23 +00:00
Dmytro Poplavskiy
861b21a18d
Added a QML viewer plugin.
...
UAV objects used in PFD are available in the QMl context.
2012-02-05 22:33:14 +10:00
Dmytro Poplavskiy
aead288304
Generate properties for UAVDataObject fields.
...
Also changed UAVObject::requestUpdate() and UAVObject::update() to be slots.
This makes possible to use objects directly from QML.
2012-02-05 13:58:17 +10:00
James Cotton
179e66b754
Refactor how new packets are scheduled to avoid trying to start a transaction
...
from an ISR. This was causing lock ups. It's a bit higher latency probably
(trivially slow) but if we aren't keeping up with the Overo transactions then
using a proper DMA double buffer will be required.
2012-02-04 20:11:31 -06:00
James Cotton
665801662d
In cc3d update sensors add accelbias before scaling to allow more precision in
...
levelinIn cc3d update sensors add accelbias before scaling to allow more
precision in levelingg
2012-02-04 12:12:41 -06:00
James Cotton
4e190f99e2
Improved the revo overosync code to put multiple uavobjects into a packet
2012-02-04 12:06:03 -06:00
Stacey Sheldon
60a2af2e58
ef+dfu: Move EF image generation into separate makefile
...
A separate makefile for EF (Entire Flash) targets allows
the removal of board-specific hard-coded addresses. These
values can now be included from the board-info.mk files
for each board.
2012-02-04 12:03:42 -05:00
Brian Webb
3f66afd74a
Removed emacs mode header from pios_gcsrcvr.c
2012-02-04 08:42:16 -07:00
Brian Webb
1b55f9fd51
Merge remote-tracking branch 'origin/next' into Brian-GCSReceiver-Failsafe
2012-02-04 08:36:55 -07:00
zedamota
427acee559
Added support for objects value limits on the GCS to the GCS and generator.
2012-02-03 20:29:28 +00:00
Stacey Sheldon
4fafbb13ed
makefile: Add EF (Entire Flash) targets for all boards
...
These new build targets will construct a flash image that
includes both a bootloader as well as a firmware image all
in one. Examples:
make ef_coptercontrol
make ef_revolution
This also adds support for a new target for writing this EF
image to boards that support a DFU interface (only F4-based
boards). This can be done by running:
make dfuutil_install
# Boot board with SBL asserted to activate STM32 DFU ROM
# Attach USB cable
make ef_revolution_dfu
Bootloader images are also now padded out to occupy the full
BL flash region.
2012-02-03 00:59:36 -05:00
Stacey Sheldon
ce544cf4ab
gdb: remove cortex_m3 remnants from revo gdb init file
2012-02-03 00:59:31 -05:00
Stacey Sheldon
99f5f20cb2
openocd: add support for stlink on stm32f4 targets
2012-02-03 00:51:31 -05:00
Brian Webb
a314604f9b
Added failsafe to GCS Receiver device.
2012-02-02 19:59:42 -07:00
James Cotton
18a64e261f
Going a bit overkill with this - deinit who SPI block between transactions.
2012-02-02 12:32:57 -06:00
James Cotton
c26154f303
Switch back to 256 byte packets and 0xFF pad the end
2012-02-02 11:40:49 -06:00
James Cotton
03cfb1453a
DeInit SPI DMA between transactions. Somehow if this doesn't happen the next
...
transaction doesn't start at the beginning again. Something is still not quite
right because first few bytes aren't getting across. Need logic analyzer.
2012-02-02 11:37:35 -06:00
James Cotton
77a6abb341
For PIOS_SPI F4 do not enable the TX irq. Also do not wait for the
...
transmission to finish either.
2012-02-02 11:24:14 -06:00
James Cotton
8b1137c6a0
Align the tx and rx SPI buffers from Overosync
2012-02-02 11:23:40 -06:00
James Cotton
0a71a48c57
Sending all FF finally again
2012-02-02 10:36:09 -06:00
zedamota
4c1e33b0b3
WIP configtaskwidget enhancements.
2012-02-02 16:22:40 +00:00
James Cotton
80b839d145
The SPI3 TX DMA channel was wrong
2012-02-02 10:13:09 -06:00
James Cotton
29237f97ae
For SPI slave devices we need to handle the interrupt differently since
...
transactions should already be completed. Also reset the callback so in the
case of noise on the IRQ line it will not keep firing interrupts.
I suspect we should probably disable interrupts in this handler to prevent
refiring.
2012-02-02 10:13:09 -06:00
James Cotton
88b9f20cda
Fix nasty bug in the DMA stream configuration
2012-02-02 10:13:09 -06:00
James Cotton
95abb56d5e
Added module to send updates out the SPI port
2012-02-02 09:19:25 -06:00
sambas
fedc62b6c3
OPReview-159: Linux posix timer thing fix
2012-02-02 16:34:46 +02:00
James Cotton
e434ab94a9
Enable SPI port for revolution to overo communications
2012-02-02 01:42:38 -06:00
James Cotton
7114b9a721
Start writing the ARM UAVTalk server client
2012-02-01 13:29:52 -06:00
David Ankers
213a915f67
Remove flightplanner screen
2012-02-01 20:09:43 +11:00
James Cotton
bd77b7e5a2
Fix stupid commit on my part. Thanks for heads up brian.
2012-01-31 19:26:48 -06:00
James Cotton
c8464848b5
Merge remote-tracking branch 'revo/amorale/revolution' into revolution
2012-01-31 17:51:20 -06:00
James Cotton
eaf9a4bded
Merge branch 'master' into next
...
Conflicts:
ground/openpilotgcs/src/plugins/config/cc_hw_settings.ui
2012-01-31 17:30:05 -06:00
James Cotton
c69717edd8
DOS2UNIX cc_hw_settings.ui to make merge work
2012-01-31 17:29:29 -06:00
Alessio Morale
5449408763
Merge branch 'amorale/timerprescaler' into inoutch8
2012-02-01 00:23:53 +01:00
Alessio Morale
cb2dadd0ea
fix Motor 8 out not working
2012-02-01 00:20:50 +01:00
Alessio Morale
322ced44a1
Solve PWM Input 8 not working
2012-02-01 00:16:48 +01:00
James Cotton
72be7bb809
Don't use usleep for the poor windows kiddies.
2012-01-31 16:32:15 -06:00
James Cotton
7990d209a8
Fix package deployment script for OSX to make sure the SVG pixmap shows up
2012-01-31 14:48:24 -06:00
James Cotton
a2979125b7
Remove the hardcoded .svg from the QLabel and load it dynamically. This will
...
be useful for CC3D.
2012-01-31 14:47:56 -06:00
James Cotton
318354a115
Fix resizing issue with input wizard
2012-01-31 13:31:14 -06:00
