rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-03 11:24:10 +01:00
Code Issues Releases Activity
4,170 Commits 5 Branches 8 Tags 266 MiB
1783817b96
Commit Graph

175 Commits

Author SHA1 Message Date
James Cotton
1783817b96 INS: First pass at altitude hold code 2011-09-13 01:44:53 -05:00
James Cotton
2871c75a79 Mainboard: Get PWM working again. Had to add extra timer IRQ handlers for 
TIM5-8.  Also TIM1 was not handled probably (for CC either) as the name of the
IRQ is TIM1_CC and TIM1_UP for the capture compare versus update.  I haven't
checked the downstream code that the registers it uses to map from a context to
event is invariant under timer channel.
 2011-09-10 13:53:38 -05:00
James Cotton
3239fdf21b Merge branch 'next' into ins 
Conflicts:
	flight/CopterControl/Makefile
	flight/OpenPilot/System/pios_board.c
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2011-09-09 08:33:34 -05:00
James Cotton
465527a980 INS: Enable GPS parsing. GPS data is processed on INS now. HomeLocation and 
WMM are not currenly implemented.
 2011-09-04 20:03:04 -05:00
James Cotton
89e640ae7f Make sure all receiver drivers return correct constants for invalid channels. 2011-09-04 01:24:16 -05:00
James Cotton
20de046292 Force system to be disarmed when a bad configuration is present 2011-09-04 00:43:33 -05:00
James Cotton
697dbf4f5f OP-568 PIOS_RCVR: Standardize the values that are returned from the PIOS_RCVR and make 
them symbolic constants.
- A timeout is 0
- A missing driver is 65534
- An invalid channel is 65535

ManualControl: Make it deal with the values explicitly.  A timed out value
should not be treated like a minimum duration signal.  Instead it does not
updated the scaled value but marks the data window as invalid to trigger the
failsafe.
 2011-09-03 23:50:56 -05:00
James Cotton
29026db5d5 Refactor the INS code out a bit but still a mess. 2011-08-17 06:15:14 -05:00
James Cotton
5619e33292 Bootloader now jumps to functioning code for INS. Consistent with AHRS code. 2011-08-12 22:52:47 -05:00
James Cotton
6529b8360f Trying to get linker system working for INS 2011-08-12 21:28:02 -05:00
James Cotton
f247112090 PiOS F2: Move IMU3000 to device dependent :(. Now they all are. Need to 
abstract as much as possible out since init is almost identicalc and protocol
COULD be device independent.
 2011-08-12 03:38:45 -05:00
James Cotton
8c1dd7b929 Make BMP085 driver device dependent and update to new driver style. 2011-08-12 03:38:45 -05:00
James Cotton
9d76efa2aa Move BMA180 driver to common architecture style. 2011-08-12 03:38:45 -05:00
James Cotton
6310f46705 HMC5883: Update driver for F2. Move to STM32F2xx directory since it is device 
dependent.  Abstract configuration out of board.h file into a standard board.c
structure.
 2011-08-12 02:26:51 -05:00
James Cotton
9c7799dfe6 UAVObject Init: Get rid of deprecated linker init code 2011-08-10 22:48:42 -05:00
James Cotton
f11aa80444 CameraStabilization: Make the CameraStabilization module put the desired 
position into another object (will help with configuration).
 2011-08-09 20:45:38 -05:00
James Cotton
a097ff784b F2 PiOS: Getting the I2C driver working again (copying changes from Zippe, 
thanks again man!)
 2011-08-09 12:58:46 -05:00
James Cotton
d78450eae8 Move some of the F2 defines into the makefile to make them global. Fixes some 
issues with grabbing the wrong stm32 configuration file.
 2011-08-09 01:19:05 -05:00
James Cotton
479ba7c21f OP-378 INS: Continue getting F2 INS to compile 2011-08-08 08:36:40 -05:00
James Cotton
558bdddeaf INS: Almost got Bootloader compiling *sigh* 2011-08-06 21:27:29 -05:00
James Cotton
d1c9ac0705 PiOS F2: Commit the F2 port of PiOS from Zippe. Thanks for doing all the hard 
work man :-D
 2011-08-06 19:36:56 -05:00
James Cotton
7720f9ff09 Add F2 support for the new OpenOCD for newer targets. Requires compiling 
OpenOCD from repo.
 2011-08-06 18:21:21 -05:00
James Cotton
0bba13a0e9 Merge branch 'next' into ins 
Conflicts:
	flight/INS/Makefile
	flight/INS/pios_board.c
	flight/Modules/Altitude/altitude.c
	flight/PiOS/Boards/STM3210E_INS.h
	flight/PiOS/STM32F10x/link_STM3210E_INS_BL_sections.ld
	flight/PiOS/STM32F10x/link_STM3210E_INS_HD_BL.ld
	flight/PiOS/STM32F10x/link_STM3210E_INS_HD_NB.ld
	flight/PiOS/STM32F10x/link_STM3210E_INS_memory.ld
	flight/PiOS/STM32F10x/link_STM3210E_INS_sections.ld
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2011-08-06 17:25:56 -05:00
James Cotton
387a22398e Make it possible to optionally enable the CameraStab module 2011-07-30 12:08:47 +09:00
James Cotton
2e5a36a4db Merge branch 'stac/refactor-usart-com' into camera_stabilization 2011-07-30 10:55:16 +09:00
James Cotton
96c2d24253 Merge branch 'next' into camera_stabilization 
Conflicts:
	flight/CopterControl/Makefile
	flight/CopterControl/System/coptercontrol.c
	flight/Modules/Actuator/actuator.c
	flight/Modules/GPS/GPS.c
	flight/Modules/ManualControl/manualcontrol.c
	flight/Modules/Stabilization/stabilization.c
	flight/Modules/System/systemmod.c
	shared/uavobjectdefinition/manualcontrolsettings.xml
	shared/uavobjectdefinition/stabilizationdesired.xml
 2011-07-30 10:06:10 +09:00
Stacey Sheldon
5f8760a55c com: Move buffering out of USART/HID layer and into COM layer 
This allows the spektrum and sbus receiver drivers to bind
directly to the usart layer using a properly exported API
rather than overriding the interrupt handler.

Bytes are now pushed directly from the usart layer into the
com layer without any buffering.  The com layer performs all
of the buffering.

A further benefit from this approach is that we can put all
blocking/non-blocking behaviour into the COM layer and not
in the underlying drivers.

Misc related changes:
 - Remove obsolete .handler field from irq configs
 - Adapt all users of PIOS_COM_* functions to new API
 - Fixup callers of PIOS_USB_HID_Init()
 2011-07-27 19:45:38 -04:00
James Cotton
b83f731c03 Remove all references to vTaskDelay in the flash code as it can run before the 
FreeRTOS scheduler

Also increaes init stack size from 0x80 to 0x100
 2011-07-15 18:16:16 -05:00
zedamota
b005346fab Windows eclipse workspace. Sorry for the mess, all is good know...I think 2011-07-14 18:16:38 +01:00
zedamota
e559582bb8 Eclipse workspace update 2011-07-14 17:09:58 +01:00
zedamota
16e28900d0 Created new eclipse workspace for windows 2011-07-14 13:34:34 +01:00
James Cotton
557771d3ef Change to OP MB code to make it work with input changes. Previously tried to 
register every possible input channel.  Slipped through review because
"obviously correct" change fixed previous bug masking this.  Woohoo testing :)
 2011-07-12 11:41:21 -05:00
James Cotton
493fcaef2a OP-193 OP-511: Add settings to scale the camera input output range 2011-06-23 00:47:27 -05:00
James Cotton
5044ea36de Start initializing objects in the modules that consume them. Shouldn't affect 
OP yet but not tested.
 2011-06-18 14:20:51 -05:00
James Cotton
7d7d03cfd0 OP-193 OP-511: Basic code for camera stabilization. Currently tune range with 
the servo endpoints and neutral.
 2011-06-15 11:18:29 -05:00
James Cotton
99b3a629a8 OP-493: Force three AccessoryDesired objects to always exist. Routing to 
Mixing channel now works.  However Accessory desired instances do not show up
in GCS.
 2011-06-05 15:38:58 -05:00
James Cotton
1365542103 OP-493: Populate the Accessory Desired from TX 2011-06-05 15:38:57 -05:00
James Cotton
3e5d02cbaf OP-152: Abstract the CRC code out of uavtalk to allow it to be reused (PT - 
feel free to test moving this to the hardware CRC unit)
 2011-06-04 18:36:26 -05:00
James Cotton
b6a8293f69 OP-378: Get BMA180 interrupt working. Data gets pushed onto a fifo that is 
pulled from in the INS code.
 2011-05-30 03:40:51 -05:00
James Cotton
eab8896f16 OP-378: INS code starts taking in sensors (timing not optimized at all yet) 2011-05-26 14:06:22 -05:00
James Cotton
750097ea73 OP-378: Small changes to get drivers working again. Fix I2C port for IMU3000 
and change convention so that 0 is success, < 0 is error.
 2011-05-18 23:35:45 -05:00
James Cotton
ab3127a0ea OP-378 Update the INS Makefile for the new file formats 2011-05-18 14:39:38 -05:00
James Cotton
b7f25ea5d8 OP-378: Get startup script for HD parts working for INS 2011-05-18 13:41:31 -05:00
James Cotton
328b3b5fee OP-378: Update INS bootloader to new format 2011-05-18 13:41:25 -05:00
James Cotton
2087441006 OP-216: Make the object manager use new flash fs for objects 2011-05-14 14:23:02 -05:00
James Cotton
612cd4ff55 Merge branch 'bugfix-flight' 2011-05-11 20:10:38 -05:00
James Cotton
d140d9c1fc Fix from Ivan for BootloaderUpdater not building with 4.5.1 2011-05-10 02:11:34 -05:00
elafargue
f904e09353 Merge branch 'master' into OP-307_Firmware_Description_Packaging 2011-05-10 08:31:25 +02:00
James Cotton
fb8417a0ff Merge remote-tracking branch 'origin/op_475_476_calibrate_during_arming' 2011-05-09 09:23:16 -05:00
elafargue
c4c9be37c6 Fix typo 2011-05-09 15:30:02 +02:00