Alessio Morale
ef066a63b1
OP-1150 UI for thermal calibration: get rid of accel_scale no more needed after refactoring
2014-02-03 20:25:59 +01:00
Alessio Morale
02c7084196
Merge remote-tracking branch 'origin/next' into amorale/OP-1149_gyro_accel_thermal_calibration
...
Conflicts:
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
2014-01-23 01:02:13 +01:00
Fredrik Arvidsson
b244f8a3cd
OP-984 Some refactoring to prepare for multi PID bank GUI support.
2014-01-01 22:49:04 +01:00
Alessio Morale
4b5ee1c2fb
OP-1149 Changes to GCS to use AccelGyroSettings for bias calculations
2013-12-29 18:58:45 +01:00
Corvus Corax
5284195c29
Refaktored sensor and state UAVObjects consistently into XXYSensor and XXYState
2013-05-18 19:36:45 +02:00
Corvus Corax
80caceb984
make uncrustify_all;make uncrustify_all;
2013-05-18 14:17:26 +02:00
Fredrik Arvidsson
4c0e5a39ca
OP-935 Disables controls when no board is connected. Re-Factored the MixerCurve widget.
2013-05-04 00:13:15 +02:00
Fredrik Arvidsson
b97d355526
OP-716 Corrected a spelling error.
2012-11-21 07:22:26 +01:00
Fredrik Arvidsson
a0cb604e32
OP-716 Replaced AccelTau checkbox with numeric spinbox. Max value was set to 0,20 and min value to 0,00, step size 0,01. Added tooltip hinting to set to 0 to disable.
2012-11-20 19:25:57 +01:00
Fredrik Arvidsson
2eeba593db
OP-716 Added default TauAccel == 0.15 to wizard.
2012-11-17 10:30:57 +01:00
Fredrik Arvidsson
95455e2378
OP-716 Added checkbox to enable accelerator filtering (cyr fix)
2012-11-16 21:22:13 +01:00
PT_Dreamer
c88c4f0fc0
Merge branch 'pt/CC3D_Release' of ssh://git.openpilot.org/OpenPilot into pt/CC3D_Release
...
Conflicts:
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
ground/openpilotgcs/src/plugins/coreplugin/connectionmanager.cpp
ground/openpilotgcs/src/plugins/coreplugin/connectionmanager.h
2012-09-14 14:12:16 +01:00
Richard Flay (Hyper)
5b7fb6bcef
Minor improvement to GCS bias calibration logic, plus minor UI behaviour tweak
2012-09-10 22:22:36 +09:30
Richard Flay (Hyper)
c5745b0817
Fixes/tweaks to GCS levelling code. Fixed a deadlock and take more samples
2012-09-08 15:58:39 +09:30
PT_Dreamer
6325263a1d
Merge branch 'pt/CC3D_Release' of ssh://git.openpilot.org/OpenPilot into pt/CC3D_Release
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
2012-09-06 12:41:08 +01:00
James Cotton
60051e88cc
Calibration: Fix both accels and gyros to 30 ms. Should be reasonably sustainable through USB.
2012-08-30 11:38:15 -05:00
James Cotton
75db9f5941
OP-669: Gyros were not being sent at a rapid rate during calibration making the results quite noisy.
...
Now both accels and gyros require a minimum number of updates before calibration completes.
Thanks to ti.dyer for the report and fix.
2012-08-29 04:29:55 -05:00
PT_Dreamer
0553534318
GCS - Fixed dynamic loaded widgets (according to board type) not
...
alerting for unsaved changes
2012-08-01 14:42:21 +01:00
PT_Dreamer
af98f4c2a6
GCS- Fixed board rotation being overwriten when calibrating.
2012-08-01 10:12:52 +01:00
PT_Dreamer
9ab86f7c7e
GCS-Changed "wiki" help buttons to the standard ones.
...
Updated the links to tiny links.
2012-07-29 23:29:39 +01:00
Chris Pember
1d1ef0dfce
removed all the pushbutton stylesheets, hid all the apply buttons
2012-07-21 10:58:05 -07:00
Mike LaBranche
682ab20f94
add accels.h, gyros.h zapped during conflict resolution
2012-06-04 17:13:55 -07:00
Mike LaBranche
bf591ebe45
Merge branch 'next' into MikeL
...
Conflicts:
flight/Bootloaders/Revolution/inc/pios_config.h
flight/Modules/OveroSync/inc/overosync.h
flight/Modules/Sensors/inc/sensors.h
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/PiOS/STM32F4xx/pios_iap.c
flight/Revolution/System/inc/pios_config.h
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
2012-06-04 15:38:57 -07:00
Mike LaBranche
e2d1f67d9e
Add virtual updateObjectsFromWidgets to configccattitude;
...
reset calibration progress bar to 0% upon successful apply/save.
2012-05-27 10:20:31 -07:00
James Cotton
3155324384
Merge branch 'next' into cc3d
...
Conflicts:
Makefile
ground/openpilotgcs/src/plugins/config/configahrswidget.cpp
shared/uavobjectdefinition/ahrscalibration.xml
shared/uavobjectdefinition/ahrssettings.xml
shared/uavobjectdefinition/attituderaw.xml
2012-05-03 16:31:49 -05:00
Brian Webb
f4164d97bd
Merge remote-tracking branch 'origin/next' into Brian-Metadata-Mods
2012-04-17 19:34:44 -07:00
zedamota
45e34cbae0
Force CC attitude config page refresh on board connection.
2012-04-17 15:19:41 +01:00
Brian Webb
496a323b7f
Fixed indentaion.
2012-03-31 07:59:44 -07:00
James Cotton
f20e5da9ed
Merge branch 'next' into revolution
...
Conflicts:
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configrevowidget.h
ground/openpilotgcs/src/plugins/scope/scopegadgetwidget.cpp
2012-03-03 11:41:41 -06:00
Brian Webb
43f6458f86
Reduced the sizeof the UAVObject metadata by:
...
1) Combining all binary or mode values into a single byte
2) Adding accessor functions to read/write the flag bits
3) Reduced the size of the time values from 32 bits to 16 bits
2012-02-20 18:45:18 -07:00
zedamota
4c1e33b0b3
WIP configtaskwidget enhancements.
2012-02-02 16:22:40 +00:00
James Cotton
4b3dcc4cc2
Make the leveling panel not crash for new gyro/accel objects but still needs
...
tweaking for CC3D.
2012-01-24 16:14:41 -06:00
James Cotton
7da8cb2079
CC: After attitude calibration always reenable BiasCorrectGyro. Fixes odd bug
...
if people have it crash in the middle.
2011-10-08 14:15:48 -05:00
zedamota
0d92e00125
Several bugfixes.
...
Created "simple wizard" button witch bypasses the sticks identification screen.
Small bugfix to fix GCS crashing if trying to upload a firmware bigger then the HW capacity.
2011-08-23 11:25:28 +01:00
zedamota
0a0d405fc1
Finished the new input configuration wizard. Fixed some bugs along the way.
...
Sending it for review now.
2011-08-17 12:43:08 +01:00
zedamota
98f84e472b
Trying to get out of merge hell
2011-08-15 14:12:54 +01:00
zedamota
1b34376797
Added "changes not saved" message warning to config gadget
2011-08-02 17:06:17 +01:00
James Cotton
efb2f315be
Small bug where a field was still referenced but didn't exist in UI.
2011-07-17 02:19:58 -05:00
James Cotton
e6ad21d881
Make gyro bias in deg/s * 100 to calibrate more precisely.
2011-06-24 10:51:07 -05:00
James Cotton
0dc541cbaa
Reformat attitude configuration gadget to use static access methods for
...
AttitudeSettings. This helps compiler catch errors.
2011-06-24 10:38:26 -05:00
James Cotton
ab7ff56d96
Compute initial gyro bias while calibrating to speed up convergence
2011-06-24 10:38:26 -05:00
elafargue
a7dccb6648
OP-502 If a board is not connected, the "Save" button is grayed out. The "Apply" button is still enable, which enables creating configurations purely offline.
2011-06-07 16:56:16 +02:00
elafargue
e5e85fa47a
Get rid of the "Request" button on the config gadget: it now tracks object updates and automatically keeps its state synchronized with UAVOBject changes.
2011-06-05 18:40:52 +02:00
David Carlson
614fd138e4
Change the help button setup from in-line help to one per page. Will no longer open an HTML window, but will open the relevant section on the wiki using the OS default browser.
2011-05-31 00:16:01 -07:00
David Carlson
b1ec27bd75
Add help buttons to the config gadget UI. Also connect all signals to its slot in configgadgetwidget.cpp. Also some very trivial .html help files.
2011-05-16 21:54:23 -07:00
elafargue
1c09f85be2
Merge branch 'master' into bugfix-ground
2011-05-09 16:50:11 +02:00
David Carlson
b89909756c
Increase accel bias samples to 60. Add debuging output if enabled during calibration. Add check for the possibility of multiple signals arriving before slot is disconnected and causing bias to be calculated incorrectly.
2011-05-09 02:55:05 -07:00
elafargue
2b11fa6ee6
Add support for Gyro bias calibration upon arming configuration in the CC Attitude config gadget.
2011-05-08 09:33:54 +02:00
elafargue
b0baee3d17
Hooked the autoupdate on CC Attitude widget on autopilot connect.
2011-05-05 23:02:42 +02:00
James Cotton
7e418866be
Update the AttitudeSetting object to make the board rotation more human
...
readable and update the GCS fields appropriately.
2011-05-05 13:04:56 -05:00
