Brian Webb
2340f4f0d9
OP-1050: Moves LED configuration above settings erase in OPLink pios_board.c to prevent crashing when settings are erased.
2013-07-29 20:37:00 -07:00
Brian Webb
0d02df4d02
Uncrustified OPLink code.
2013-07-05 18:49:26 -07:00
Brian Webb
6dbecca7a5
OP-932 Fixes erasing settings on OPLink and blocks OPLinkSettings objects from being transmitted over the radio.
2013-07-05 18:25:52 -07:00
Brian Webb
d0d8a0aadd
OP-932 Adds PWM outputs to OPLinkMini. Both gpio pins on the main and/or flexi port can be configured to output PWM for a total of up to 4 PWM outputs.
2013-07-03 18:58:34 -07:00
Brian Webb
491e5fe685
Adds a failsafe on PPM output on OPLink that kicks in when the link goes down. Also updates all air datarate settings and adds new 64 and 100 kbps modes.
2013-06-29 15:00:38 -07:00
Brian Webb
bab69401b9
OP-932 Allows configuring the Revo as coordinator.
2013-06-27 19:55:01 -07:00
Brian Webb
2aea2342ab
OP-932 Adds a direct PPM channel on each Tx packet when in PPM mode, and adds a PPM only mode that uses a 9600 bps air datarate. Also updates the OPLink configuration tab and moves all OPLink configuration to the OPLink configuration tab on the Revo, and customizes the OPLink configuration tab for the Revo.
2013-06-26 18:01:54 -07:00
Brian Webb
774a74884a
OP-932 Replaces the RFM22B PPM/receiver code with an OPLinkReceiver UAVObject. This object is generated on a coordinator OPLink, and is used by both the OPLink to generate PPM output, and the OPLinkReceiver on the Revo.
2013-06-26 17:57:11 -07:00
Brian Webb
8c370df319
OP-932 A significant re-work of the OPLink and configuration of the OPLink. Auto-configuration is removed, and remote modems are bound the coordinator, rather than the other way around. Timing of the radio link is also significantly changed. The rfm22b code is also simplified so that it only sends packet, and has no notion about what those packets are, so the rfm22b is converteded to simply a com type device.
2013-06-26 17:56:56 -07:00
Brian Webb
08efc8d152
OP-932: Adds an oplink receiver device, which is based on the gcs receiver device, but uses the OPLinkReceiver UAVObject. The OPLinkReceiver packets are generated on the OPLink modem.
2013-06-26 17:56:20 -07:00
Oleg Semyonov
7f84307714
OP-997: fix release notes. This change was reverted but not documented
2013-06-22 18:29:40 +02:00
Alessio Morale
2c0f7794a9
Merge remote-tracking branch 'origin/amorale/OP-997_revolution_settings_to_ext_flash' into next
2013-06-11 15:39:13 +02:00
Brian Webb
789930db45
Moved PIOS_TASK_MONITOR_Initialize to before EventDispatcherInitialize. The event dispatcher creates a task that registers itself with the task monitor. It is unlikely that the task will start before the task monitor is initialized, but not impossible (at least on the F4 targets, I don't think).
2013-06-09 20:16:40 -07:00
Alessio Morale
e9b3ee52f3
OP-997: add fields to SystemStatsUavo to monitor storage status
2013-06-09 19:20:00 +02:00
Alessio Morale
1cb69e6a0e
OP-997: Revert Revolution settings storage to external flash to prevent freezes during sector erase/garbage collection
2013-06-09 19:17:12 +02:00
Brian Webb
50162333d8
Merge remote-tracking branch 'origin/dankers/minor-modem-renames' into next
2013-05-27 09:44:17 -07:00
David Ankers
69ede538c9
Update date bu just an easy ay to start review +review OPReview-485
2013-05-26 17:50:44 +10:00
David Ankers
2f9c9df736
Increase the size of the USB Descriptor array to take extra char
2013-05-26 17:03:48 +10:00
David Ankers
7a9466bbf9
State in the header which board this is for
2013-05-26 16:12:35 +10:00
David Ankers
f7a9f94a36
Missing file header
2013-05-26 16:09:55 +10:00
David Ankers
a5b856d1bc
Change board description name to OPLink Mini
2013-05-26 16:04:55 +10:00
David Ankers
d5eccea78f
Comment and header renames, change PipX to OPLink Mini
2013-05-26 15:48:02 +10:00
Brian Webb
ac4847c8ac
OP-932 Moves the configuration of the com ports on the coordinator OPLink to startup.
2013-05-21 19:48:21 -07:00
Brian Webb
649667d338
Addes ifdef PIOS_INCLUDE_WDG around several calls to the wathdog functions for the Revolution firmware (allows you to turn off the watchdog).
2013-05-19 12:56:23 -07:00
Sexy Pony
900f643bbd
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
Alessio Morale
ab7af16be3
Merge branch 'amorale/OP-901_lib_udates-usb_fixes' into HEAD
...
Conflicts:
flight/pios/stm32f10x/library.mk
flight/targets/boards/revoproto/firmware/pios_board.c
2013-05-19 15:01:08 +02:00
Alessio Morale
88a39a81d8
Enable ComUsbBridge Optional Module and fix CDC support for RevoProto
2013-05-19 10:07:01 +02:00
Alessio Morale
e8dc7509f9
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2013-05-18 17:18:48 +02:00
Oleg Semyonov
80ce4fc995
Fix weird error of running python script with extra --verbose option as a part of script name
...
This error of building any EF targets was found on Windows if used with
make V=1 verbose output option. The '--verbose' python script option was
used by the Windows make as a part of python script file name with
'file not found' error. Now it works. Still can't get the cause of that
error, though...
2013-05-18 17:25:26 +03:00
Alessio Morale
c1f767b12d
Merge remote-tracking branch 'origin/amorale/OP-954_logfs_settings_in_internal_flash' into next
...
Conflicts:
flight/pios/common/pios_flashfs_logfs.c
2013-05-18 15:53:25 +02:00
Alessio Morale
66da2796e0
Merge remote-tracking branch 'origin/amorale/OP-905_revolution_watchdog_next' into next
2013-05-18 15:00:50 +02:00
Brian Webb
bc4f615c25
Adds setting HSE_VALUE on all F1 targets (should only be necessary if the HSE clock is not 8MHz).
...
Moves the CMSIS system_stm3210x.c from library.mk to the individual Makefiles for the F1 targets. This allows for custom SystemInit functions where necessary.
2013-05-17 22:01:48 -07:00
Alessio Morale
67e41c34fc
Merge remote-tracking branch 'origin/next' into amorale/usb_fixes
2013-05-17 22:46:42 +02:00
Richard Flay (Hyper)
a6aedee9fa
Merge branch 'next' into brian/support_inverted_USB_vsense
2013-05-17 05:54:42 +09:30
Alessio Morale
6ba15ebc53
OP-954 Fixes from review:
...
- CopterControl target fix
- tabs in Nakefiles
- Removed duplicate stale settings and clean empty lines in osd Makefile
+review OPReview-470
2013-05-15 23:18:50 +02:00
Alessio Morale
c80f01dff9
OP-954 Rename the legacy PIOS_INCLUDE_FLASH_SECTOR_SETTINGS to PIOS_INCLUDE_FLASH_LOGFS_SETTINGS
...
+review OPReview-470
2013-05-15 23:16:34 +02:00
Brian Webb
156109bb88
Added support for an active low USB vsense line.
2013-05-14 20:37:13 -07:00
Alessio Morale
71cae382ae
OP-954 Update OPLink to support the "UAVObject on a specific LogFS instance" updates
2013-05-14 23:54:50 +02:00
Alessio Morale
07af6b5c80
Added LogFS support for OPLinkMini with internal flash
2013-05-14 23:00:45 +02:00
Alessio Morale
8d57d8ff76
Internal flash settings for F1
...
Conflicts:
flight/pios/stm32f10x/pios_flash_internal.c
2013-05-14 22:58:05 +02:00
Alessio Morale
742ea6f6b8
Merge branch 'amorale/OP-905_revolution_watchdog' into next
...
Conflicts:
flight/targets/RevoMini/System/pios_board.c
2013-05-14 18:42:02 +02:00
Richard Flay (Hyper)
ed68fbe68d
OP-951: Adds -Wshadow to flight CFLAGS and fixes resulting compilation breakage.
...
+review OPReview
2013-05-14 07:01:45 +09:30
Alessio Morale
535b53cb1c
Raised priority for USB interrupt to high, changed subriority to 0 (PriorityGroup is 0)
2013-05-11 22:41:05 +02:00
Stacey Sheldon
441e9e7b84
f4 usb: always init HID and CDC devices
...
This is required so that we can always respond to HID and
CDC requests via the control endpoint (ep0). The F1/F3
implementation gets away with disabling these interfaces
because all of the ep0 handling is in the usbhook code
rather than (properly) split out into class-specific
drivers like it is done on the F4 implementation.
Conflicts:
flight/targets/DiscoveryF4/System/pios_board.c
flight/targets/FlyingF4/System/pios_board.c
flight/targets/Freedom/System/pios_board.c
flight/targets/Quanton/System/pios_board.c
2013-05-11 22:41:04 +02:00
Stacey Sheldon
565de5fd4e
f4 usb: ensure correct interface numbers for BL and FW
...
The interface numbers differ for the HID interface between
the BL and FW. This is required to keep windows happy.
In HID+CDC, the CDC interfaces must come first with HID last
which makes it #2 . In HID only mode, we can't use #2 for HID
since windows doesn't like the first/only interface to be
anything other than #0 .
Conflicts:
flight/targets/board_hw_defs/discoveryf4/board_hw_defs.c
flight/targets/board_hw_defs/flyingf4/board_hw_defs.c
flight/targets/board_hw_defs/freedom/board_hw_defs.c
flight/targets/board_hw_defs/quanton/board_hw_defs.c
2013-05-11 22:41:02 +02:00
Stacey Sheldon
9cc70695d7
f4 usb cdc: add support for USB CDC to RevoMini
...
Conflicts:
flight/targets/RevoMini/System/inc/pios_config.h
flight/targets/RevoMini/System/pios_board.c
2013-05-11 22:40:56 +02:00
Stacey Sheldon
c6e893e1e5
usb: fix interfaces in USB HW defs for OSD
2013-05-11 22:38:28 +02:00
Stacey Sheldon
207bd671ac
usb: fix interfaces in USB HW defs for RevoMini
2013-05-11 22:38:27 +02:00
Alessio Morale
d555bd0673
Uses Internal flash for system settings storage repourposing external flash for "User" storage
2013-05-11 22:06:30 +02:00
Alessio Morale
687e75b2e2
Changes to board specific files to support UAVObject on a specific LogFS instance
2013-05-11 17:15:07 +02:00
