rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2025-01-10 20:52:11 +01:00
Code Issues Releases Activity
5,474 Commits 5 Branches 8 Tags
Commit Graph

2613 Commits

Author SHA1 Message Date
Stacey Sheldon
740b5f1584 rcvr: convert PWM, PPM, SBUS and Spektrum to use PIOS_RCVR 
All receivers now fall under the same driver API provided
by pios_rcvr.c.

This is part of a larger sequence of commits that will
switch the receiver selection over to boot time dynamic
configuration via UAVObjects.
 2011-07-05 22:03:25 -04:00
Stacey Sheldon
e77795dc28 rcvr: add generic driver API for receivers 
Will be used to collapse PWM, PPM, Spektrum and SBUS so we
can choose between them at boot time instead of at compile time.
 2011-07-05 22:02:47 -04:00
Stacey Sheldon
0c4facac46 heap: reduce stack size on IDLE and Event tasks 
The FreeRTOS IDLE task was using 512 bytes of stack.
The UAVObject Event task was also using 512 bytes of stack.

Both have been reduced, recovering 400+ bytes of heap.
 2011-07-05 20:13:00 -04:00
James Cotton
010f0255a4 OP-543: When the magic header on file system is bad at init, read multiple 
times.  It's not written as cleanly as I'd like but works for wiping when magic
value changes.  Testing will reveal if this stops the lost settings.
 2011-07-04 21:44:41 -05:00
James Cotton
ad8876c62a OP-193: Weak leveling variant on rate mode. Slowly will return to level. 2011-07-04 20:44:55 -05:00
Mathieu Rondonneau
f864d723dd OP-423: Cleanup and remove recently added *_BL.S startup file. 2011-07-03 18:45:02 -07:00
Mathieu Rondonneau
2daa36aad9 OP-423: Remove *_BL.S 2011-07-03 13:14:42 -07:00
Mathieu Rondonneau
b3740ec025 OP-423: Clean startup and add weak function call for stack swap. 2011-07-03 12:43:38 -07:00
James Cotton
46ae7eb17b Merge remote-tracking branch 'origin/bugfix-ground' into heli_stabilization 2011-06-30 19:40:22 -05:00
James Cotton
39e646ae1d Make the rates all work properly in axis lock 2011-06-30 19:38:52 -05:00
zedamota
567e3ffcad OP-542 Board resets with new Uploader 
IAP module now checks magic value
 2011-06-30 12:17:27 +01:00
James Cotton
a7206361d2 Slightly different way to respond to sticks in axis lock that is much more 
responsive and avoids overshoot.
 2011-06-26 21:59:54 -05:00
Mathieu Rondonneau
fbf0b021c7 OP-423: Replace hardcoded value and get value from memory section (change from code review) 2011-06-25 20:06:33 -07:00
Corvus Corax
fc62f6e522 Module initialisation rework ported to PiOS.posix 2011-06-26 00:25:06 +02:00
Mathieu Rondonneau
6683ce8570 OP-423: Make it more obvious that MODULE_TASKCREATE_ALL and MODULE_INITIALIZE_ALL are macro (for now): 
- remove the ;
  - also encapsulate the macro by {} in his own scope.
 2011-06-25 11:40:01 -07:00
James Cotton
4c0245281d Now we store the gyro bias avoid quashing the initialization correction. 2011-06-25 12:32:06 -05:00
Mathieu Rondonneau
de55c56427 OP-423: Change capital on macro to be uppercase for consistency. 2011-06-24 22:03:03 -07:00
James Cotton
dedbcbfceb Correct nasty bug on range checking for max rate and use the axis lock rate 
desired when in that mode.
 2011-06-24 11:30:28 -05:00
James Cotton
e6ad21d881 Make gyro bias in deg/s * 100 to calibrate more precisely. 2011-06-24 10:51:07 -05:00
James Cotton
5127d1e7ba Change actuator memory to 900 bytes since it uses less now. 2011-06-24 10:49:36 -05:00
James Cotton
038f955cb1 OP-410 OP-333: Axis lock (heading hold) implemented 2011-06-24 10:38:26 -05:00
James Cotton
ab7ff56d96 Compute initial gyro bias while calibrating to speed up convergence 2011-06-24 10:38:26 -05:00
James Cotton
c0eff41dc6 OP-410 OP-333: Created an Axis-lock setting for stabilization 2011-06-24 10:38:26 -05:00
James Cotton
0a4bbcc12e Added a field for initial gyro bias to speed up initialization. 2011-06-24 10:38:26 -05:00
James Cotton
28501842c3 Expose the rate D term which in simulations seems to help damp oscillations for 
high RateKp terms.  However it might be sensitive to gyro noise (vibrations).
In addition it is mathematically similar to lead shapign so probably only use
one or the other.
 2011-06-24 10:38:25 -05:00
James Cotton
a09642675c Tweak the integral calculation so it is scaled in ms internally. This avoids a 
loss of precision on the accumulation.
 2011-06-24 10:38:25 -05:00
James Cotton
373689207a Add a 1-tap IIR filter into the gyros in the feedback path. This will make the 
stabilization output a bit more resilient to the high frequency noise from
gyros.  However this value shouldn't be too high as it will increase the phase
delay of the feedback loop and decrease stability.  Default is 5 ms.

Note: this resests the stabilizationsettings object.  Sorry guys.
 2011-06-24 10:38:25 -05:00
Stacey Sheldon
d1104d3fdc alarms: lower heap warning and critical thresholds for CC 
Free heap on CC is currently 160 bytes so the current thresholds
were causing a continual alarm condition, thus preventing arming.
 2011-06-24 10:38:25 -05:00
Mathieu Rondonneau
dcd2774103 OP-423 Fix some comment from code review: 
- update example module
- use module init macro for POSIX and WIN to make code cleaner.
 2011-06-24 06:59:51 -07:00
Corvus Corax
f52f6d30c6 VTalk (flight): Buffers allocated dynamically with size calculated by UAVObjGenerator. Support for tx packet sizes < object size.i 2011-06-24 02:08:20 +02:00
James Cotton
f6312c7798 OP-410 OP-333: Created an Axis-lock setting for stabilization 2011-06-23 14:51:18 -05:00
James Cotton
9aba787b02 OP-193: Check for instance read success was backwards 2011-06-23 03:01:37 -05:00
James Cotton
368d5b649a OP-193: Output mixer should read from up to 6 accessory channels (may add more 
in future).
 2011-06-23 01:47:55 -05:00
James Cotton
493fcaef2a OP-193 OP-511: Add settings to scale the camera input output range 2011-06-23 00:47:27 -05:00
Mathieu Rondonneau
703919daf4 OP-423 Reduce IRQ stack limits (CC onlyt) 2011-06-22 06:32:27 -07:00
Mathieu Rondonneau
0ff5e9a46f Merge branch 'master' into OP-423_Mathieu_Change_Init_To_Reduce_Memory_Footprint 2011-06-21 22:02:13 -07:00
James Cotton
9c1e523260 Drop 8 bytes per PID of unecessary information. Also trying to compute 
integral in ms instead of seconds to avoid rounding errors.
 2011-06-21 17:54:03 -05:00
James Cotton
8976d22fad Merge remote-tracking branch 'origin/OP-159_os_sbus' 2011-06-21 17:51:22 -05:00
Oleg Semyonov
fba201c8b3 usart: move default port numbers from pios_config.h to pios_board.c 2011-06-22 01:32:18 +03:00
Mathieu Rondonneau
74e5e2015e Merge branch 'master' into OP-423_Mathieu_Change_Init_To_Reduce_Memory_Footprint 2011-06-20 20:28:12 -07:00
Stacey Sheldon
80709f356f alarms: lower heap warning and critical thresholds for CC 
Free heap on CC is currently 160 bytes so the current thresholds
were causing a continual alarm condition, thus preventing arming.
 2011-06-20 22:31:05 -04:00
unknown
9e632b532e Fix win32 SiTL by adding PiOS CRC and another missing function. 2011-06-20 15:48:05 -04:00
Mathieu Rondonneau
fc1e3f574c OP-423: Split task create and module init in order to postpone task creation once the full heap is available. 
Also implement some ordering (quite ugly still) in the module init and task creation order so we can decide which module to start/init first
and which module to start/init last.
This will be replaced/adapter with the uavobject list later (once it's implemented).
reserving some space for module init and task create parameters to customize module/task creation (this will be usefull once we get the list and customization from customer).

Changes have been made for OP and CC. Tested comped with CC,OP, sim_posix.
Only ran on bench with CC for couple of minutes (code increase expected but no dropping of stack which is good).

This gives task creation at the time wherethe all heap is available.
 2011-06-19 22:35:40 -07:00
James Cotton
17fa227d1f Fixed typo, thanks Os 2011-06-19 16:51:54 -05:00
Oleg Semyonov
6272210df7 sbus: some code cleanup (no functional changes) 2011-06-19 14:30:13 +03:00
Mathieu Rondonneau
2b11395a67 OP-423 just move stack from systemmod back to heap (200 bytes) that are not needed anymore. 2011-06-18 17:31:29 -07:00
Mathieu Rondonneau
5e3e7cc4e3 OP-423 Fix issue with init not properly started in the right order endup up object thinking other where not init. 2011-06-18 17:28:37 -07:00
Oleg Semyonov
59da5055cd usart: make USART ports configurable from make command line 
For CopterControl the following make options are available:

USE_TELEMETRY=[YES|NO|1|3]    (default is YES, USART1)
USE_GPS=[YES|NO|1|3]          (default is NO, USART3)
USE_SPEKTRUM=[YES|NO|1|3]     (default is NO, USART3)
USE_SBUS=[YES|NO|1]           (default is NO, USART1 only)
 2011-06-18 23:54:32 +03:00
Oleg Semyonov
311902f1f2 sbus: implemented S.Bus stream decoding 2011-06-18 23:19:57 +03:00
James Cotton
724016ffb0 When erasing flash at the end start flashing LED to indicate it is done 2011-06-18 14:32:09 -05:00