rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-03 11:24:10 +01:00
Code Issues Releases Activity
4,239 Commits 5 Branches 8 Tags 266 MiB
3388843fb5
Commit Graph

202 Commits

Author SHA1 Message Date
James Cotton
0f8ae1e076 Merge branch 'next' into ins 
Conflicts:
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2011-10-26 13:18:44 -05:00
James Cotton
27bf2b383e Merge remote-tracking branch 'origin/james/remap_outputs' into next 2011-10-23 18:35:25 -05:00
Oleg Semyonov
4ed23dd891 Output Remapping: renamed PPM_SERVO option to PPM+Servo 2011-10-24 00:34:01 +03:00
James Cotton
24d6ae731b Output Remapping: Added option to just use servo outputs on input lines but not 
PPM.  This saves resources.  Good suggestion Os.  In this configuration we
could allow 12 channels of output but for now I'll leave it capped at 10 to
lessen resources on the mixer table.

With spektrum and camera stab enabled there was
1632 bytes heap remaining
180 bytes irq stack remaining
 2011-10-23 15:21:40 -05:00
Oleg Semyonov
58d0812309 sbus: better frame syncronization, some cosmetic changes 
In the previous version the decoder could in rare cases get synced from
the middle of data stream in case of data byte equal to the S.Bus start
of frame (SOF) byte (wrong data will be rejected but it was not perfect).
Now it waits for the real start of frame and then checks the SOF byte.
 2011-10-22 00:44:09 +03:00
James Cotton
e0cc289de0 Remapping inputs to outputs: Drop S2 so there are ten outputs 
Output 7 = S3 input
Output 8 = S4 input
Output 9 = S5 input
Output 10 = S6 input

Also fix bug that prevented them outputting signal
 2011-10-20 06:28:07 -05:00
James Cotton
ce7f424131 CC: When receiver port is set to PPM_SERVO use the spare pins as outputs 2011-10-15 16:59:42 -05:00
James Cotton
19c9528d80 CopterControl: Create structures to supply more output channels 2011-10-15 16:59:42 -05:00
James Cotton
cf6a59468f Merge branch 'next' into ins 
Conflicts:
	flight/INS/Makefile
	flight/Project/OpenOCD/stm32f1x.cfg
	flight/Project/OpenOCD/stm32f2x.cfg
	make/firmware-defs.mk
 2011-09-27 01:02:06 -05:00
James Cotton
f1e70d2ff5 Merge remote-tracking branch 'origin/msmith/OP-578' into next 2011-09-23 16:43:00 -05:00
James Cotton
acf2aa218b Merge remote-tracking branch 'origin/stac/upgrade-to-openocd-0.5.0' into next 2011-09-14 11:49:01 -05:00
James Cotton
400ba3bd47 Merge branch 'next' into ins 2011-09-12 18:57:11 -05:00
James Cotton
6457276438 Merge branch 'input_configuration' into next 2011-09-11 18:52:35 -05:00
Oleg Semyonov
7b3056d10f Input Configuration: fix S.Bus receiver in multi-receiver code 2011-09-12 02:06:48 +03:00
Mike Smith
deade53c5d OP-578 - check for CODE_SOURCERY before setting -fpromote-loop-indices 2011-09-11 10:49:09 -07:00
James Cotton
01cd2ded57 Mainboard config: The rcvr port is used for PPM/PWM/Spektrum so make these one 
setting that is mutually exclusive.
 2011-09-10 14:20:51 -05:00
James Cotton
eb191d869a Mainboard: Get spektrum working again. 2011-09-10 14:19:54 -05:00
James Cotton
c2a8cc3faa Mainboard config: The rcvr port is used for PPM/PWM/Spektrum so make these one 
setting that is mutually exclusive.
 2011-09-10 14:19:12 -05:00
James Cotton
1d2a424296 Mainboard: Get spektrum working again. 2011-09-09 09:42:13 -05:00
James Cotton
3239fdf21b Merge branch 'next' into ins 
Conflicts:
	flight/CopterControl/Makefile
	flight/OpenPilot/System/pios_board.c
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2011-09-09 08:33:34 -05:00
Stacey Sheldon
2f86e4dd4f Make PWM/PPM and Servo drivers play nicely together 
PWM and PPM can now coexist in the same load and be
selected at boot time via the hwsettings UAVObject.

This is basically a complete restructuring of the
way the drivers interact with the TIM peripheral in
the STM32.

As a side effect, the PWM and PPM drivers are now
ready to support multiple instances of each.

This also provides the first step toward being able
to reassign some of the PWM input pins to be servo
output pins.  Still more work required, but this is
a good start.
 2011-08-27 21:39:56 -04:00
James Cotton
c5746335c6 Initialize GCSReceiver object if it is being used 2011-08-27 15:57:09 -05:00
James Cotton
dc340596f5 Merge branch 'next' into GCS_ChangesToUI-RuntimeCFG 
Conflicts:
	flight/CopterControl/Makefile
	flight/OpenPilot/System/pios_board.c
	flight/OpenPilot/UAVObjects.inc
	flight/PiOS/STM32F10x/pios_spektrum.c
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configgadget.qrc
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
	shared/uavobjectdefinition/hwsettings.xml
 2011-08-27 15:26:05 -05:00
Stacey Sheldon
f29b99521e openocd: collapse JTAG rules for STM32F1 and STM32F2 2011-08-27 10:43:02 -04:00
James Cotton
274333a9bf Merge branch 'next' into stac/use-malloc-failed-hook 2011-08-27 00:12:45 -05:00
James Cotton
5f7a9b513a Merge branch 'sambas/dsmx_stuff' of ssh://git.openpilot.org/OpenPilot into next 
Conflicts:
	shared/uavobjectdefinition/hwsettings.xml
 2011-08-24 11:37:30 -05:00
Stacey Sheldon
edc0caf521 heap: set memory critical alarm on malloc failures 
Activate the FreeRTOS malloc failed hook and use it
to set the memory critical alarm.
 2011-08-21 23:14:32 -04:00
James Cotton
e1afc9a19a Merge branch 'next' into ins 
Conflicts:
	flight/Libraries/inc/fifo_buffer.h
	flight/PiOS/STM32F10x/link_STM3210E_INS_sections.ld
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2011-08-21 00:47:43 -05:00
James Cotton
86b652bbab Merge branch 'next' into camera_stabilization 2011-08-14 18:07:57 -05:00
zedamota
e736b17cc4 Merge remote-tracking branch 'remotes/origin/next' into GCS_ChangesToUI-RuntimeCFG 
Conflicts:
	ground/openpilotgcs/src/plugins/config/config_cc_hw_widget.cpp
	ground/openpilotgcs/src/plugins/config/configgadgetwidget.h
	ground/openpilotgcs/src/plugins/config/configstabilizationwidget.cpp
 2011-08-14 15:48:16 +01:00
James Cotton
f766ba47aa Increase the size of the eventdispatcher task and lower the maximum queue size. 2011-08-13 19:21:58 -05:00
James Cotton
9c7799dfe6 UAVObject Init: Get rid of deprecated linker init code 2011-08-10 22:48:42 -05:00
James Cotton
f11aa80444 CameraStabilization: Make the CameraStabilization module put the desired 
position into another object (will help with configuration).
 2011-08-09 20:45:38 -05:00
James Cotton
a0d77faf4b PiOS: Move pios_iap out of common. It is STM32F1x specific. Created an 
STM32F2xx stub version.  This needs cleaning up - there is some common code,
most of which can probably move to the bl_helper function.
 2011-08-06 20:24:07 -05:00
sambas
1e67b5e3b5 DSMx_binder, hw setting 0 disabled, 1-10 bind pulses. Manual disable after successful bind. Only for flexiport. 2011-08-06 22:16:47 +03:00
James Cotton
a592e7d398 ManualControlSettings must be also initialized in pios_board.c 2011-08-04 07:47:50 -05:00
Stacey Sheldon
90b2625deb rcvractivity: Add tracking of Rx channel activity 2011-08-02 01:27:37 -04:00
Stacey Sheldon
06cdeb7b61 rcvr: support multiple simultaneous receivers 
Now also supports multiple instances of the Spektrum driver.
These are configured as Spektrum1 and Spektrum2.
 2011-08-02 01:22:04 -04:00
Stacey Sheldon
829b8b83f6 rcvr: Add GCS receiver driver for rcvr via telemetry 
This allows the GCS to emulate a receiver device via the
telemetry link.

Select "GCS" as your input type in the manualcontrol config
screen and calibrate it as normal.

Note: The expected values for the channels are in microseconds
      just like a PWM or PPM input device.  The channel values
      are validated against minimum/maximum pulse lengths just
      like normal receivers.
 2011-08-02 01:22:04 -04:00
James Cotton
035b4103c4 Need to initialize the HwSettings before using them. 2011-07-31 09:42:15 +09:00
James Cotton
3df730c64f Merge branch 'stac/refactor-usart-com' into camera_stabilization 2011-07-30 13:38:43 +09:00
James Cotton
387a22398e Make it possible to optionally enable the CameraStab module 2011-07-30 12:08:47 +09:00
Stacey Sheldon
8c0b60099f rcvr: don't init spektrum and sbus rcvrs twice 2011-07-29 22:59:50 -04:00
James Cotton
132e19d613 Change the makefiles - always compile the optional objects but the flag 
indicates whether they are registered
 2011-07-30 11:29:29 +09:00
James Cotton
ae67c51632 Register some missing objects with their modules 2011-07-30 11:28:21 +09:00
James Cotton
2e5a36a4db Merge branch 'stac/refactor-usart-com' into camera_stabilization 2011-07-30 10:55:16 +09:00
James Cotton
b2d2114ede Disable auto registration of all objects. Later the uavobj_init linker scripts 
should be deleted to not carry around old code.
 2011-07-30 10:24:46 +09:00
James Cotton
23e9b56839 Dos2unix flight/CopterControl/System/coptercontrol.c 2011-07-30 10:06:35 +09:00
James Cotton
96c2d24253 Merge branch 'next' into camera_stabilization 
Conflicts:
	flight/CopterControl/Makefile
	flight/CopterControl/System/coptercontrol.c
	flight/Modules/Actuator/actuator.c
	flight/Modules/GPS/GPS.c
	flight/Modules/ManualControl/manualcontrol.c
	flight/Modules/Stabilization/stabilization.c
	flight/Modules/System/systemmod.c
	shared/uavobjectdefinition/manualcontrolsettings.xml
	shared/uavobjectdefinition/stabilizationdesired.xml
 2011-07-30 10:06:10 +09:00
Stacey Sheldon
c2fb0d8b43 com: allow run-time allocation of buffers 2011-07-29 15:33:14 -04:00