James Cotton
35025303cd
Getting data from gyro.
2012-01-17 19:29:38 -06:00
James Cotton
0cc18e7dcf
Add files for new L3DG20 sensor
2012-01-04 20:33:54 -06:00
James Cotton
e1c21462b0
Delete another unused file
2012-01-04 19:47:06 -06:00
James Cotton
d5eb38a065
Remove references to deprecated targets
2012-01-04 19:42:45 -06:00
James Cotton
0da6109871
Update the F4 copyright headers to 2012
2012-01-04 19:29:29 -06:00
James Cotton
05da41a79b
Get FirmwareIAP object working on revo
2011-12-24 13:15:56 -06:00
James Cotton
fd8899018f
Get EKF running
2011-12-14 01:54:06 -06:00
James Cotton
a37a17a4fb
Created a separate Sensor module and Attitude module for revolution
2011-12-12 21:40:39 -06:00
James Cotton
8bbc767a4e
Get the pressure sensor working and reading into Revolution
2011-11-27 00:52:09 -06:00
James Cotton
cd65df013e
Merge branch 'next' into revolution
...
Conflicts:
flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
2011-11-26 22:52:32 -06:00
James Cotton
21367d3a22
Spektrum support for Revolution
2011-11-26 22:19:42 -06:00
James Cotton
c57acf6459
F4 PiOS: Must use a different remap command on F4 for timer module to command
...
pin. Include the remap source in the config structure now.
2011-11-26 03:35:26 -06:00
James Cotton
fae611a01f
Fix bug where clicking back at last screen of input wizard would go back to
...
main screen and then in future buttons hung around for no reason
2011-11-25 11:30:12 -06:00
James Cotton
7637e9f669
Get flash chip working and saving to memory. Also get the I2C working with
...
BMA180 driver.
2011-11-19 00:13:02 -06:00
James Cotton
0efffef1fa
Work on bringing the Revolution board up
2011-11-17 10:13:34 -06:00
James Cotton
684715930a
Merge branch 'next' into revolution
...
Conflicts:
flight/OpenPilot/Makefile
flight/Revolution/System/inc/openpilot.h
2011-11-14 10:11:53 -06:00
James Cotton
96a098bf74
Add code for MPU6050 driver
2011-11-13 19:44:56 -06:00
James Cotton
1e2fe77e3f
Start migrating the attitude solution to FreeRTOS
2011-11-13 18:51:35 -06:00
James Cotton
fffb6449ac
Delete the old INS target
2011-11-13 17:31:34 -06:00
James Cotton
c44235494c
Update the Revolution board file a bit
2011-11-13 17:23:56 -06:00
James Cotton
ec84fc4058
Get the Revolution bootloader working
2011-11-13 17:13:42 -06:00
Oleg Semyonov
f5e82b8242
spektrum: rename Spektrum to DSM (DSM2/DSMJ/DSMX used by Spektrum and JR radios)
...
No code changes, just file, variable and define names are changed.
First, it better describes the serial protocol used by DSMx satellite
receivers. Second, many people using Spektrum radio, assume Spektrum
protocol. This is the attempt to address those inaccuracies.
2011-11-04 21:40:34 +02:00
James Cotton
c0f16d2f44
Revolution: Configure clocks correctly
2011-11-03 20:12:34 -05:00
James Cotton
a2015a4f8d
Compiled and flashing
2011-11-02 13:20:39 -05:00
James Cotton
0ce80e02f5
Compiles now
2011-11-02 02:51:20 -05:00
James Cotton
f019412209
Various tweaks to get the F4 working
2011-10-26 21:56:00 -05:00
James Cotton
d786c152e3
Merge F4 files from PixHawk branch
2011-10-26 18:23:35 -05:00
James Cotton
0f8ae1e076
Merge branch 'next' into ins
...
Conflicts:
flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
2011-10-26 13:18:44 -05:00
James Cotton
9312610f3b
Output: Enable two more channels to support octo + camera
2011-10-15 16:59:42 -05:00
James Cotton
ce7f424131
CC: When receiver port is set to PPM_SERVO use the spare pins as outputs
2011-10-15 16:59:42 -05:00
James Cotton
fef9570e4d
INS: Get bootloader working again
2011-09-27 01:17:14 -05:00
James Cotton
cf6a59468f
Merge branch 'next' into ins
...
Conflicts:
flight/INS/Makefile
flight/Project/OpenOCD/stm32f1x.cfg
flight/Project/OpenOCD/stm32f2x.cfg
make/firmware-defs.mk
2011-09-27 01:02:06 -05:00
James Cotton
acf2aa218b
Merge remote-tracking branch 'origin/stac/upgrade-to-openocd-0.5.0' into next
2011-09-14 11:49:01 -05:00
Oleg Semyonov
c92870d29e
Remove unused file (versionblob.py)
2011-09-13 16:10:10 +03:00
James Cotton
4847a04db8
Mainboard: Get PWM working again. Had to add extra timer IRQ handlers for
...
TIM5-8. Also TIM1 was not handled probably (for CC either) as the name of the
IRQ is TIM1_CC and TIM1_UP for the capture compare versus update. I haven't
checked the downstream code that the registers it uses to map from a context to
event is invariant under timer channel.
2011-09-10 14:20:40 -05:00
James Cotton
2871c75a79
Mainboard: Get PWM working again. Had to add extra timer IRQ handlers for
...
TIM5-8. Also TIM1 was not handled probably (for CC either) as the name of the
IRQ is TIM1_CC and TIM1_UP for the capture compare versus update. I haven't
checked the downstream code that the registers it uses to map from a context to
event is invariant under timer channel.
2011-09-10 13:53:38 -05:00
James Cotton
3239fdf21b
Merge branch 'next' into ins
...
Conflicts:
flight/CopterControl/Makefile
flight/OpenPilot/System/pios_board.c
flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
2011-09-09 08:33:34 -05:00
James Cotton
465527a980
INS: Enable GPS parsing. GPS data is processed on INS now. HomeLocation and
...
WMM are not currenly implemented.
2011-09-04 20:03:04 -05:00
James Cotton
89e640ae7f
Make sure all receiver drivers return correct constants for invalid channels.
2011-09-04 01:24:16 -05:00
James Cotton
20de046292
Force system to be disarmed when a bad configuration is present
2011-09-04 00:43:33 -05:00
James Cotton
697dbf4f5f
OP-568 PIOS_RCVR: Standardize the values that are returned from the PIOS_RCVR and make
...
them symbolic constants.
- A timeout is 0
- A missing driver is 65534
- An invalid channel is 65535
ManualControl: Make it deal with the values explicitly. A timed out value
should not be treated like a minimum duration signal. Instead it does not
updated the scaled value but marks the data window as invalid to trigger the
failsafe.
2011-09-03 23:50:56 -05:00
Stacey Sheldon
5a51077493
openocd: add support for RTOS autodetection
...
This allows things like 'info threads' to work in gdb when
combined with openocd 0.5.0+.
2011-08-27 10:38:50 -04:00
Stacey Sheldon
89d23df8cd
openocd: Add default config for stm32f2x
...
Pulled from origin/james/ins.
2011-08-27 10:37:20 -04:00
Stacey Sheldon
3d22258843
Merge remote branch 'origin/james/openocd' into upgrade-to-openocd-0.5.0
2011-08-27 09:19:46 -04:00
James Cotton
29026db5d5
Refactor the INS code out a bit but still a mess.
2011-08-17 06:15:14 -05:00
James Cotton
ca413415a0
Code to make openocd 0.5.0 work. I'll keep this branch rebased on next.
2011-08-13 18:03:49 -05:00
James Cotton
5619e33292
Bootloader now jumps to functioning code for INS. Consistent with AHRS code.
2011-08-12 22:52:47 -05:00
James Cotton
6529b8360f
Trying to get linker system working for INS
2011-08-12 21:28:02 -05:00
James Cotton
f247112090
PiOS F2: Move IMU3000 to device dependent :(. Now they all are. Need to
...
abstract as much as possible out since init is almost identicalc and protocol
COULD be device independent.
2011-08-12 03:38:45 -05:00
James Cotton
8c1dd7b929
Make BMP085 driver device dependent and update to new driver style.
2011-08-12 03:38:45 -05:00
