rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-11-29 07:24:13 +01:00
Code Issues Releases Activity
12,948 Commits 5 Branches 8 Tags 266 MiB
43d193cceb
Commit Graph

5401 Commits

Author SHA1 Message Date
Karl Knutsson
9bf18490b1 OP-1522: Channel timeout logic 
Use real time rather than missed pickets when deciding if we are
disconneted. Makes the link less sensitive at higher rates since
higher rates means more chances to get a packet through within the
given time.
 2015-02-02 21:25:38 +01:00
Karl Knutsson
b0491da115 OP-1576: Remove unused tx_resent counter 
Remove unused tx_resent counter and replace it with
rx_failure in link quality calculations.
 2015-02-02 21:25:38 +01:00
Karl Knutsson
52c1080ffe OP-1522 Robustness of OPLink radio 
Increase number of channels to 32 for all bit rates.
Synchronize clock on all channels.
Go into failsafe after 4 or 8 (one_way_link) missed packets.
Don't stay on channel 0 if we dropped a packet.
 2015-02-02 21:25:38 +01:00
Erik Gustavsson
966ef5ce75 OP-1680 Increase the range and resolution of OPLink PPM values 
Encode 511 steps plus a single "invalid" value, rather than 256 steps
plus a dedicated valid flag bit. This gives a range of 990 - 2010 us in
steps of 2 us.
 2015-02-02 21:25:37 +01:00
Alessio Morale
86a1ca2bcf OP-1683 - Pulse length must be zeroed at each cycle 2015-02-02 19:58:04 +01:00
Alessio Morale
752f3447d2 OP-1683 - Implement an update skip strategy in single pulse mode when pulse period is higher than the update cycle 2015-02-02 02:58:22 +01:00
Alessio Morale
a5f601593d OP-1683 - Put again in place safe limits on pulse width 2015-01-31 15:04:02 +01:00
Alessio Morale
1d08083375 OP-1682 - OneShot125: Change timer clock to 2MHz (that's available as exact value for current targets), raise timer period to prevent glitches 2015-01-31 14:40:40 +01:00
Alessio Morale
025e3596fa OP-1682 - Fixes from review 2015-01-31 12:55:34 +01:00
Alessio Morale
86571a804d OP-1683 - Switch to the same schema used by cleanflight. 
Running in repetitive mode, clearing CCRx after manually triggering update event.
 2015-01-30 21:22:14 +01:00
Alessio Morale
632051c0ac OP-1683 - Increase resolution for OneShot125 running timer at 8MHz, setup automatically rates for OneShot 2015-01-30 21:22:00 +01:00
Erik Gustavsson
1b94f178e8 OP-1691 Remove busy-wait and add yeild points in rfm22_init() 2015-01-28 20:55:36 +01:00
Alessio Morale
1ad4a01b75 OP-1682 - Fixes for review 2015-01-25 21:51:37 +01:00
Alessio Morale
7955f63c98 OP-1683 - Clenaup, trigger update in setfailsafe, Fix standard pwm operation 2015-01-25 21:25:14 +01:00
Corvus Corax
7e421b99a4 uncrustificationization 2015-01-25 15:48:45 +01:00
Alessio Morale
5f034dfd3e OP-1683 - Missing uncrustification for f1 stubs. 2015-01-24 15:41:04 +01:00
Alessio Morale
dcc9a5b7dc OP-1683 - Actuator uses "standard" 1000-2000 range and remap it to 125-250 just before sending to servo to prevent any impact on gcs and other blocks 2015-01-24 13:37:00 +01:00
Alessio Morale
2a10d9d481 OP-1683 - fixes to PIOS_Servo, added code to prevent overflows 2015-01-24 13:35:41 +01:00
Alessio Morale
ec69941c30 OP-1683 - Fix compilation for other targets 2015-01-24 13:08:56 +01:00
Laurent Lalanne
7a24fc62a6 Merge branch 'laurent/OP-1674_GUI_display_oplm_frequency' into next 2015-01-24 01:28:28 +01:00
Laurent Lalanne
5d4b1df85c OP-1652 Fix comment 2015-01-24 00:56:31 +01:00
Alessio Morale
411416d2a1 OP-1683 - Fix compilation for CC (not yet supported) 2015-01-24 00:18:20 +01:00
Alessio Morale
73c6ae2055 OP-1683 - Add revolution and other f4 targets support 2015-01-23 23:56:39 +01:00
Alessio Morale
47e1312982 OP-1683 - Implement oneshot/oneshot125 mode to actuator module 2015-01-23 23:51:53 +01:00
Alessio Morale
1f95332ff4 OP-1683 - Implement servo synchronous update mode for F4 2015-01-23 23:50:51 +01:00
Laurent Lalanne
c506fc93d6 OP-1674 Revert changes from previous commit in flight side, keep comments changes 2015-01-22 19:49:06 +01:00
Laurent Lalanne
68f9763e73 OP-1652 Typo FlexiIOPin 2015-01-21 14:32:21 +01:00
Laurent Lalanne
bc178b8a95 OP-1652 WS281x pins : Update flight side for revo 2015-01-21 14:12:36 +01:00
Alessio Morale
caa51253db OP-1682 - Workaround overflow issue with pwm receiver inputs on shared timers. 2015-01-19 21:55:40 +01:00
Laurent Lalanne
4c27a78072 OP-1674 Allow channel 250 2015-01-12 12:57:01 +01:00
Fredrik Arvidsson
c8c3a46735 Uncrustify 2015-01-09 21:49:03 +01:00
abeck70
2b6d79467c gpsassist:code review comments 
1. Defines
2. Name of adjustments changed to vtolSelfTuningStats
 2015-01-09 07:51:37 +11:00
abeck70
b1c94e83d0 gpsassist: One commit new branch 
Collapsed into one branch for a new code review.  Some unnecssary committed files removed.
 2015-01-08 13:20:47 +11:00
Mathieu Rondonneau
acc124cacb OP-1625: DSM: more robust detection of resolution 
This allows switching back and forth between 10 and 11 bit
code which prevents getting locked up in one or the other.
It also avoids a situation that can cause an infinite
recursion.

This changeset is cherry-picked from TauLabs (b7eaf87502085666d9738ae16c66170f187f3981).
Thanks to Taulabs for improving OpenPilot's DSM autodetect feature.
 2014-12-30 21:29:06 -08:00
Fredrik Larsson
4f7fc1bac7 Merge remote-tracking branch 'origin/corvuscorax/OP-1599_positionvario-reworks' into next 2014-12-14 23:45:57 +11:00
Mathieu Rondonneau
6844f8351d run uncrustify. 2014-12-04 20:17:29 -08:00
Mathieu Rondonneau
4b00f6039d OP-1626: Allow binding to happen within satellite binding window. 
- This is working for satellite 22ms (genuines and clones).
 - This change only affect revo.
 2014-11-29 19:59:18 -08:00
Alessio Morale
99d73426b8 Uncrustify 2014-11-27 12:05:59 +01:00
Fredrik Larsson
1687ef7e8f Merge remote-tracking branch 'origin/rel-14.10' into next 2014-11-23 12:15:32 +11:00
Fredrik Larsson
cd94410468 DSM Protocol removed flight firmware 2014-11-22 08:32:00 +11:00
Fredrik Larsson
1942d2ee30 Remove protocol enum 2014-11-22 07:44:55 +11:00
Fredrik Larsson
a45e28afa9 Merge remote-tracking branch 'origin/rel-14.10' into next 2014-11-22 03:39:30 +11:00
Mathieu Rondonneau
b0cc9ce021 OP-1625: DSM2/DSMX autodetection of channel resolution. 2014-11-20 19:58:34 -08:00
Fredrik Larsson
141cf194f1 Signed cats 2014-11-21 11:53:47 +11:00
Fredrik Larsson
8b3ae66932 New cat files after bump 2014-11-21 11:48:17 +11:00
Fredrik Larsson
9480c6efe6 Bump driver version 2014-11-21 11:47:36 +11:00
Fredrik Larsson
17c0102d34 Remove old cat files 2014-11-21 11:47:00 +11:00
Mathieu Rondonneau
1c6ac29218 OP-1625: DSM2/DSMX autodetection of channel resolution. 2014-11-18 19:35:57 -08:00
Laurent Lalanne
4fdcceda65 Merge branch 'laurent/OP-1601_CC_Ram' into next 2014-11-17 03:30:45 +01:00
Laurent Lalanne
357f091f0f Merge branch 'laurent/OP-1601_CC_Ram' into rel-14.10 2014-11-17 03:29:47 +01:00
Werner Backes
4b68deb878 Disable the "preamble invalid" interrupt for the RFM22b module. It causes 
high CPU load and isn't used anyway.
 2014-11-16 20:16:02 +11:00
Laurent Lalanne
8d08223e8a OP-1601 Don't use new PVT messages with CC/CC3D 2014-11-15 22:39:17 +01:00
Laurent Lalanne
9e0ede3386 OP-1601 barosensor.c and airspeedstate.c removed from Makefile 2014-11-15 22:17:08 +01:00
Werner Backes
d9a3fac502 Disable the "preamble invalid" interrupt for the RFM22b module. It causes 
high CPU load and isn't used anyway.
 2014-11-15 11:37:06 +01:00
Corvus Corax
5f352f54a3 OP-1599 updated defaults for position roam mode settings, do not low pass filter throttle 2014-11-10 19:06:27 +01:00
Corvus Corax
8fe21ed297 OP-1599 removed autotune from all flight code 2014-11-08 16:17:39 +01:00
Corvus Corax
c0e66a8acf OP-1599 renamed flightmodes 2014-11-08 16:01:59 +01:00
Corvus Corax
3e5c5bd140 OP-1599 added new mode "courselock" in handlers where missing 2014-11-08 14:04:00 +01:00
Corvus Corax
db0ba763bf OP-1599 add low pass filter to control input in vario mode to possibly reduce rubber-band effect - needs test and tuning 2014-11-08 13:32:40 +01:00
Corvus Corax
7d2ca3d92f OP-1599 added course lock mode, renamed other position vario modes 2014-11-08 12:59:55 +01:00
Corvus Corax
c21d3d8a67 uncrustification! 2014-11-08 12:59:16 +01:00
Fredrik Larsson
e7d183b5e6 Merge branch 'rel-14.10' into next 2014-11-07 14:58:41 +11:00
Alessio Morale
6a2666381f OP-1588 - Improve manualcontrol assumptions to be easier to mantain 2014-11-01 17:54:54 +01:00
Alessio Morale
e04825e7b7 OP-1588 - Remove *relay flight modes 2014-11-01 16:11:11 +01:00
Alessio Morale
b3b2d1ef02 OP-1584 - Remove some unused big UBX messages when running with GPS_MINIMAL 2014-11-01 16:00:03 +01:00
Alessio Morale
71d30a7521 OP-1584 - reduce telemetry queue size 2014-10-31 20:39:52 +01:00
Alessio Morale
c0ca20f661 OP-1584 - Remove auxmagsupport from cc3d for now as it is unused, remove other stuffs from ubx when GPS_MINIMAL is selected 2014-10-31 19:56:38 +01:00
Fredrik Larsson
0ea56989e7 Merge branch 'rel-14.10' into next 2014-10-31 10:12:50 +11:00
Fredrik Larsson
2dc777304e Merge remote-tracking branch 'origin/abeck/OP_1503v3-yaffs' into next 2014-10-31 10:09:39 +11:00
Corvus Corax
d0417dda84 OP-1573 fix armhandler to not timeout-disarm when flying autonomously 2014-10-29 21:12:57 +01:00
Alex Beck
e2b38d0d7d Yaffs or dosfs now conditional linkage for simposix yaffs testing 2014-10-28 08:48:38 +11:00
Alex Beck
b4e3fe137b Removed unrequired signals from handler 2014-10-25 20:01:32 +11:00
Alex Beck
c6aa4ed1d6 Added signal handler that on ctrl-c will unmount the yaffs device(s) and save to the em-norsim file 2014-10-25 19:55:56 +11:00
abeck70
942945850b Merge branch 'next' into abeck/OP_1503v3-yaffs 2014-10-23 21:25:54 +11:00
a*morale
7c1265ee30 OP-1548 - Change Fusion algorithm names to make clear their pourpose 2014-10-21 00:49:00 +02:00
a*morale
d1a229a9cb OP-1553 OPLink does not work as non coordinator 
Revert "OP-1535 - SPI:Use pio for small blocks"

This reverts commit 823a1afad2.
 2014-10-20 21:46:14 +02:00
Karl Knutsson
5ab924c07e Revert "OP-1522 Robustness of OPLink radio" 
This reverts commit 00d9c66867.
 2014-10-16 08:23:10 +02:00
Karl Knutsson
5ef8d3803d Revert "OP-1530 Use rfm22b_dev->num_channels" 
This reverts commit 4e365f6dff.
 2014-10-16 08:23:10 +02:00
Karl Knutsson
b69e222456 Revert "OP-1532 fix non-ppm mode" 
This reverts commit 9fd4fb26b9.
 2014-10-16 08:23:10 +02:00
Alessio Morale
a9f35e2afe Merge branch 'amorale/OP-1535_mpu_overhaul' into next 2014-10-16 00:51:02 +02:00
Alessio Morale
3ac2874687 OP-1540 - sha1sum was not sent correctly by GPS V9 2014-10-15 00:58:34 +02:00
Alessio Morale
15cd40a907 Merge remote-tracking branch 'origin/skarlsso/OP-1534_add_expo_and_acro_insanity_factor_to_txpid' into next 2014-10-14 21:43:59 +02:00
Alessio Morale
7968bcdb00 Merge remote-tracking branch 'origin/skarlsso/OP-1528_telemetry_on_flexi-io' into next 2014-10-14 21:17:37 +02:00
Alessio Morale
f4ef36f66c Merge remote-tracking branch 'origin/skarlsso/OP-1536_revo_combridge_garbage' into next 2014-10-14 21:16:52 +02:00
abeck70
de68e0179f First round review comments 2014-10-14 17:17:59 +11:00
Alessio Morale
fe20e39d5c OP-1535 - uses union in fast_invsqrt 2014-10-14 05:39:11 +02:00
Alessio Morale
5d074063d1 OP-1535 - Add board specific sensor update rate constant 2014-10-14 05:38:57 +02:00
Fredrik Arvidsson
0fd9758e0c OP-1525 Gaah. 2014-10-12 15:01:34 +02:00
Fredrik Arvidsson
118209e40d OP-1525 Updated comment. 2014-10-12 14:59:41 +02:00
Alessio Morale
f2fc5f5616 OP-1513 - Fix time constants, set initial temperature as first sample value 2014-10-11 23:54:21 +02:00
Alessio Morale
823a1afad2 OP-1535 - SPI:Use pio for small blocks 2014-10-11 09:57:25 +02:00
Alessio Morale
9499cf9abc OP-1535 - Some optimizations for attitude module 2014-10-11 09:57:07 +02:00
Stefan Karlsson
3285519380 OP-1536 Send only the available bytes, not the entire buffer, to the USB CDC RX callback function 2014-10-10 23:51:04 +02:00
Alessio Morale
4a8cfe3f86 OP-1535 - Refactor MPU6k driver to allow direct and fifo access based on configuration 2014-10-10 22:33:50 +02:00
Alessio Morale
28274cdb6b OP-1535 - Fixes CC3D sensor SPI configuration 2014-10-10 22:33:49 +02:00
Alessio Morale
9350bd65d9 OP-1535 - change sensor rate to 1KHz with software downsample to 500Hz 
Allow per board SPI prescaler settings
 2014-10-10 22:33:49 +02:00
Alessio Morale
c1062124af OP-1531 - Add temperature filtering for baro compensation 2014-10-10 22:33:47 +02:00
Alessio Morale
46fee43487 OP-1531 Filter temperatures for gyro and accel calibration. calculate new bias every 30 samples 2014-10-10 22:33:42 +02:00
Stefan Karlsson
c03d390269 OP-1534 Update both roll and pitch with TxPID Roll+Pitch.Expo option 2014-10-10 18:49:18 +02:00
Stefan Karlsson
bedb749f72 OP-1534 Add expo and acro insanity factor to TxPID 2014-10-10 17:57:24 +02:00
m_thread
19a7f4cd22 OP-1525 Changed some boundaries in firmware code. 2014-10-10 13:56:11 +02:00
m_thread
bb4d271799 OP-1525 Made the Expo magic number a constant and changed it to 1.00695f. 
Changed n the firmware code to match the GCS side.
 2014-10-10 12:26:22 +02:00
abeck70
948d6546af yaffs simposix ready for review 
All yaffs changes for library inclusion, arm compilation, and simposix integration.
 2014-10-10 13:21:06 +11:00
Fredrik Arvidsson
9fb474d930 Merge remote-tracking branch 'origin/next' into thread/OP-1525_Acro_GUI 2014-10-09 20:08:19 +02:00
Karl Knutsson
9fd4fb26b9 OP-1532 fix non-ppm mode 
Always send packets from the coordinator.
Previously the coordinator only always sent packets
on channel 0. This scheme doesn't work with
with the change to use 32 channel.
 2014-10-08 20:59:51 +02:00
m_thread
b794c87d3b Merge remote-tracking branch 'origin/next' into thread/OP-1525_Acro_GUI 2014-10-08 00:56:24 +02:00
Stefan Karlsson
aaebc25eff OP-1528 Fix Telemetry-only over the Flexi-IO port 2014-10-08 00:31:31 +02:00
Fredrik Larsson
cb6e9fda6d Merge remote-tracking branch 'origin/havyan/oplink-0' into next 2014-10-08 08:02:48 +11:00
Karl Knutsson
4e365f6dff OP-1530 Use rfm22b_dev->num_channels 
Use the number of allocated channel from the num_channels field
in the pios_rfm22b_dev struct rather than from the maximum number
of possible of channels given the configured speed.
 2014-10-07 22:50:52 +02:00
Stefan Karlsson
004f5a32a9 OP-1528 Enable Telemetry on the Flexi-IO (receiver) port on the Revo 2014-10-06 21:28:09 +02:00
Corvus Corax
270f6d87cd OP-1516 changed handling of integrals in acrop 2014-10-06 17:47:16 +02:00
Corvus Corax
b05bd2fb34 OP-1516 fixed boundf mistake 2014-10-05 21:07:06 +02:00
Corvus Corax
9525398deb OP-1516 use fastPow implementation for expo - to make it work on cc3d 2014-10-05 01:25:15 +02:00
Karl Knutsson
00d9c66867 OP-1522 Robustness of OPLink radio 
Increase number of channels to 32 for all bit rates.
Synchronize clock on all channels.
Go into failsafe after 4 or 8 (one_way_link) missed packets.
Don't stay on channel 0 if we dropped a packet.
 2014-10-03 22:20:11 +02:00
Karl Knutsson
1c6e9b3cc4 OP-1510 don't hard code tx_power to 100mW 2014-10-03 22:20:11 +02:00
Corvus Corax
bdb5c88d08 OP-1516 added bank configurable expo to stick to allow snappier rate response 2014-10-03 19:07:47 +02:00
Corvus Corax
ac0fccc10a OP-1516 re-introduce sanity to Acro+ 2014-10-03 15:44:02 +02:00
Corvus Corax
17f187468c Merge remote-tracking branch 'origin/next' into corvuscorax/OP-1516_acro+ 2014-10-03 12:34:35 +02:00
Alessio Morale
8e2e534c60 Uncrustify/clean commented code 2014-10-03 11:41:26 +02:00
Alessio Morale
21156dbb9e Merge remote-tracking branch 'origin/amorale/OP-1515_fix_attitude_fifo_fixed' into next 2014-10-03 11:12:10 +02:00
Alessio Morale
55402880bc Revert "Merge remote-tracking branch 'origin/amorale/OP-1515_fix_attitude_fifo' into next" 
This reverts commit 316f7fcf02, reversing
changes made to cfa0ef4671.
 2014-10-03 11:11:27 +02:00
Alessio Morale
e553014596 Merge branch 'amorale/OP-1476_1477_1275_GPSV9_pios_firmware_bootloader' into next 2014-10-03 00:37:55 +02:00
Alessio Morale
9cfd55d006 Merge branch 'amorale/OP-1507_gps_module_cpu_optimization' into next 2014-10-03 00:37:39 +02:00
Corvus Corax
a12e2708a2 OP-1516 fixed obvious issues 2014-10-02 23:38:06 +02:00
Corvus Corax
dcb354b0b1 OP-1516 Enable PiroComp per setting 2014-10-02 22:42:08 +02:00
Corvus Corax
3ad47bfa0a OP-1516 added Acro+ stabi mode 2014-10-02 22:13:10 +02:00
Corvus Corax
2586dafa8c OP-1511 added comment to filter code for better readability 2014-10-02 21:18:52 +02:00
Alessio Morale
a5fd040b49 OP-1515 - Attitude module was not reading all gyro/accel fifo items causing it to lag behind by at least a sample 2014-10-01 21:13:44 +02:00
Alessio Morale
ae9f30c729 OP-1477 - Fix mag exti config, set correct rate, set correct SPI speed for hmc5x83. Note: GPIO is disabled as it seems there is some issues with Exti on PB0 2014-10-01 02:07:46 +02:00
Alessio Morale
0ffb99f228 OP-1477 - Fix issue with quick request to DDC port, change baud rate to 57600, fix sys rate, optimize uart tx 2014-10-01 02:06:03 +02:00
Alessio Morale
c1641613ce OP-1515 - Attitude module was not reading all gyro/accel fifo items causing it to lag behind by at least a sample 2014-09-30 15:12:37 +02:00
Fredrik Larson
efde46cf7a Merge branch 'next' into fw_wiz 2014-09-30 15:41:19 +10:00
Alessio Morale
b2aa73acf6 Merge remote-tracking branch 'origin/amorale/OP-1499_autoconfig_retries' into next 2014-09-29 21:30:16 +02:00
Alessio Morale
9e0596c2c5 Merge remote-tracking branch 'origin/amorale/OP-1379_ext_led_notification_module_new' into next 
Conflicts:
	Makefile
	flight/targets/boards/discoveryf4bare/firmware/Makefile
	flight/targets/boards/revolution/firmware/Makefile
 2014-09-29 21:26:31 +02:00
Alessio Morale
5054bda433 OP-1477 - Fix SYS message rate 2014-09-28 20:29:52 +02:00
Alessio Morale
f2058dfc7f OP-1477 - Remove hardcoded strings for initialization config 2014-09-28 15:01:19 +02:00
Alessio Morale
4c76620402 OP-1507 - Reduce memory usage for CopterControl 2014-09-27 22:40:17 +02:00
Alessio Morale
93cf6b457f OP-1507 - optimize com fifo usage when RX callback receives a single byte 2014-09-27 00:20:15 +02:00
Alessio Morale
d0b37bab28 OP-1507 - Handles GPS data a chunk at time instead of a single byte at time. 2014-09-27 00:17:00 +02:00
Alessio Morale
be747138e1 OP-1275 - Optimize fifo for single char operations 2014-09-25 20:26:35 +02:00
Alessio Morale
7e789ccc69 OP-1379 - Clear output pin at the end of dma cycle 2014-09-25 00:59:39 +02:00
Alessio Morale
78756f6873 OP-1499 - Failed Autoconfig will raise an Error Alarm. When AC does start it will reset any previous ack. Force update to Autoconfig Status in GPSPositionSensor UAVO. Add a small pause between each config step 2014-09-24 06:12:48 +02:00
Alessio Morale
8712a1dfdc OP-1477 - Board support for updated SYS message 2014-09-24 01:06:49 +02:00
Alessio Morale
c772442723 OP-1477 - remove debug infos and add send some relevant informations using SYS message (firmware and board revision/info) 2014-09-24 01:06:41 +02:00
m_thread
7bcdff9f2f Merge remote-tracking branch 'origin/next' into thread/OP-1222_FW_Wizard 
Conflicts:
	ground/openpilotgcs/src/plugins/setupwizard/setupwizard.cpp
	ground/openpilotgcs/src/plugins/setupwizard/vehicleconfigurationhelper.cpp
	ground/openpilotgcs/src/plugins/setupwizard/vehicleconfigurationsource.h
 2014-09-23 22:30:49 +02:00
Alessio Morale
7e78194e12 OP-1477 - change led rate so that's less annoying 2014-09-23 20:27:10 +02:00
Corvus Corax
ca7a3e4333 Merge branch 'next' into corvuscorax/OP-1483_leaky-integrals-and-post-filtering 2014-09-23 13:54:33 +02:00
Werner Backes
b621df59f2 Merge remote-tracking branch 'origin/D-Lite/OP-1483-PathFollower-DisablePosKi' into next 2014-09-23 13:33:32 +02:00
Fredrik Larsson
5bbd6724d6 Merge remote-tracking branch 'origin/skarlsso/OP-1493_discoveryf4bare_support_in_gcs' into next 2014-09-23 21:11:15 +10:00
m_thread
19aa3ed5a3 Merge remote-tracking branch 'origin/next' into thread/OP-1222_FW_Wizard 2014-09-22 23:05:21 +02:00
Fredrik Larson
c36e9a9122 Merge remote-tracking branch 'origin/thread/OP-1474_PID_Scaling_Banks' into next 2014-09-23 06:20:34 +10:00
Fredrik Larsson
b93a7a9dce Arming for Helis on Revo 2014-09-23 05:35:35 +10:00
Alessio Morale
0885fda926 OP-1499 - CFG-CFG mask was incorrect (nav is 0x02, not 0x01) 2014-09-22 00:56:49 +02:00
Alessio Morale
3c6a8e0395 OP-1379 - Prevent loosing any update to background notification and notifications with priority higher than current 2014-09-21 23:32:52 +02:00
Corvus Corax
41e062373d OP-1483 enable postfilter for indoor mode for filter debugging, change default filter alpha coefficient to 0.999 2014-09-21 19:26:01 +02:00
Alessio Morale
a5ebf36425 OP-1499 - Replay the configuration sequence in case of gps disconnection, add retry logic in case of errors 2014-09-21 16:38:52 +02:00
Alessio Morale
7a9a0868c9 OP-1275 - split persistence handling out of UavobjectManager. stubs are used if target deos not support persistency 2014-09-20 21:02:51 +02:00
Alessio Morale
cedb4f127d OP-1477 - typos and other fixes from review 2014-09-20 20:58:40 +02:00
Corvus Corax
76f94e13ef Revert "OP-1483 implement leaky integral on position control loop in pathfollower (vtol only)" 
This reverts commit 1a0ab29050.
 2014-09-20 13:45:45 +02:00
Corvus Corax
b315c8f106 OP-1483 Added velocity filter to correct EKF's velocity estimate for static velocity offsets 
(caused for example by sensor disagreement or calibration issues)
 2014-09-19 16:34:20 +02:00
Corvus Corax
1a0ab29050 OP-1483 implement leaky integral on position control loop in pathfollower (vtol only) 2014-09-19 15:52:11 +02:00
m_thread
226fe186c4 Merge branch 'skarlsso/OP-1474-PID_Scaling_one_factor' of ssh://git.openpilot.org/OpenPilot into thread/OP-1474_PID_Scaling_Banks 2014-09-19 15:15:52 +02:00
Stefan Karlsson
b3e7a23f4f OP-1474 Demultiplex TPS settings when pid banks are updated 2014-09-19 15:12:07 +02:00
Stefan Karlsson
9a21eed71e OP-1474 Make it possible to select axes to scale 2014-09-19 15:11:15 +02:00
m_thread
3b1e67d185 Merge remote-tracking branch 'origin/next' into thread/OP-1474_PID_Scaling_Banks 
Conflicts:
	ground/openpilotgcs/src/plugins/config/stabilization.ui
 2014-09-19 09:01:02 +02:00
Stefan Karlsson
f0c47976a5 OP-1474 Fix label compile error 2014-09-19 01:29:04 +02:00
Stefan Karlsson
31c5f1c519 OP-1474 Make it possible to select the combination of P, I, and D to scale 2014-09-19 01:16:49 +02:00
Stefan Karlsson
d3e7ef300f OP-1474 Use PID banks for the TPS settings 2014-09-19 01:05:08 +02:00
Werner Backes
c90973cb99 Removed the now unused position Ki from VtolPathFollowerSettings UAVObject 2014-09-18 17:01:50 +02:00
Alessio Morale
46ef59f186 OP-1379 - Rebuild and simplify the queuing mechanism 2014-09-17 01:24:01 +02:00
Alessio Morale
eb15939031 OP-1477 - typo in mallocFailed trap 2014-09-17 00:21:32 +02:00
Alessio Morale
2cca5162f7 OP-1477 - a bit of cleanup, some flash bits moved to a separate file 2014-09-16 23:02:53 +02:00
Alessio Morale
2885a20acb OP-1477 - add watchdog support 2014-09-16 22:51:28 +02:00
Alessio Morale
2f50dbeee5 OP-1477 - Split and cleanup gpssys module 2014-09-16 22:40:55 +02:00
Alessio Morale
cac463e623 OP-1477 - various changes 
- move to UBX libraries;
- remove configuration (it will be done by Revo);
- set speed at 115200;
- Change sysmod rate;
 2014-09-16 22:40:55 +02:00
Alessio Morale
50d4a97c0c OP-1477 - GPS SYS: for multi device support of HMC5x driver 2014-09-16 22:40:55 +02:00
Alessio Morale
c232985baa OP-1477 - initial framer + autoconfiguration and some fixes 
- Added a framing code for gps data to be able to interleave mag sentences.
 - Fix fields definition, set structures used to send UBX data as packed to fix issues with alignments,
 - change axis orientation to match revo when both boards conector sides are are aligned
 2014-09-16 22:40:54 +02:00
Alessio Morale
28f3ca9a17 OP-1477 - Use UBX_DDC driver 2014-09-16 22:40:54 +02:00
Alessio Morale
11522ccbb0 OP-1477 - move to PIOS_I2C 2014-09-16 22:40:54 +02:00
Alessio Morale
36bb58755b OP-1477 - add support for SPI/MAG 2014-09-16 22:40:54 +02:00
Alessio Morale
1fa2bfddc6 OP-1477 - Add GPS System Module 2014-09-16 22:40:54 +02:00
Alessio Morale
531d80a69c OP-1476 - Fix other targets for OP_DFU changes 2014-09-16 22:40:54 +02:00
Alessio Morale
b971b713d6 OP-1476 - Fix Bootloader jumpToApp condition and change speed to 57600 2014-09-16 22:40:53 +02:00
Alessio Morale
7e73c59e90 OP-1476 - Fixes for Bootloader 
- Allocate 10KBytes for bootloader;
- Replace pios_com_msg with pios_com for ssp support
- Change Speed to 9600 for higher reliability
 2014-09-16 22:40:53 +02:00
Alessio Morale
c44dac2447 OP-1476 - fix bootloader for serial support 2014-09-16 22:40:53 +02:00
Alessio Morale
3eca0fefef OP-1477 - Change mag GAIN to 1.3 2014-09-16 22:40:53 +02:00
Alessio Morale
250b7fe962 OP-1477 - Fix mag DRDY/GPIO support 2014-09-16 22:40:52 +02:00
Alessio Morale
14862c687d OP-1477 - Add ubx handling libraries 2014-09-16 22:40:52 +02:00
Alessio Morale
a6fc5c9190 OP-1477 - Fixes for multi device support of HMC5x driver 2014-09-16 22:40:52 +02:00
Alessio Morale
bcb30ecbf3 OP-1477 - enable temp compensation and fix axis orders 2014-09-16 22:40:52 +02:00
Alessio Morale
4890ef3ab0 OP-1477 - Add support for Flash 2014-09-16 22:40:52 +02:00
Alessio Morale
146c1764fd OP-1477 - UBX_DDC driver implementation 2014-09-16 22:40:52 +02:00
Alessio Morale
f2a0daac5c OP-1477 - Add pios_ubx_ddc driver to handle i2c comms with UBlox GPS 2014-09-16 22:40:52 +02:00
Alessio Morale
71af403c9d OP-1477 - some cleanup 2014-09-16 22:40:51 +02:00
Alessio Morale
7e55d6ff41 OP-1477 - add support for SPI/MAG 2014-09-16 22:40:51 +02:00
Alessio Morale
b4f9c7c2b1 OP-1477 - BL fix issue with usart name 2014-09-16 22:40:51 +02:00
Alessio Morale
b3a971e91d OP-1477 - support for mag 2014-09-16 22:40:51 +02:00
Alessio Morale
c28eb4fbca OP-1477 - Add SPI Support 2014-09-16 22:40:51 +02:00
Alessio Morale
46424523b0 OP-1477 - Firmware usart Working 2014-09-16 22:40:51 +02:00
Alessio Morale
1970e0a870 OP-1477 - Fix bootloader 2014-09-16 22:40:50 +02:00
Alessio Morale
9b61fc611b OP-1477 - Add platform support 2014-09-16 22:40:50 +02:00
Alessio Morale
81ae43ac40 OP-1275 - fix Watchdog 2014-09-16 22:40:50 +02:00
Laurent Lalanne
bc9e6b24f9 Merge remote-tracking branch 'origin/laurent/OP-1491_HQuad_mixing_values' into laurent/OP-1222_FW_Wizard 
Conflicts:
	ground/openpilotgcs/src/plugins/setupwizard/pages/multipage.cpp
	ground/openpilotgcs/src/plugins/setupwizard/resources/connection-diagrams.svg

Conflicts resolved in artwork, same style as FW branch
 2014-09-16 18:55:43 +02:00
Alessio Morale
984a7a675c OP-1275 - add ChangeBaud to PIOS_COM_MSG 2014-09-16 00:42:51 +02:00
Alessio Morale
20273e77aa OP-1275 - Fix CPU usage due to uncleared irq flags 2014-09-16 00:42:51 +02:00
Alessio Morale
94c39caa50 OP-1275 - Fix PIOS_COM to be used with no PIOS_INCLUDE_FREERTOS defined 2014-09-16 00:42:51 +02:00
Alessio Morale
ffac550601 OP-1275 - Optimize fifo for single char operations 2014-09-16 00:42:51 +02:00
Alessio Morale
0c7f4905da OP-1275 - Fix PiOS_EXTI 2014-09-16 00:42:51 +02:00
Alessio Morale
de4180f990 OP-1275 - Reenable usart after init in ChangeBaud 2014-09-16 00:42:51 +02:00
Alessio Morale
212170bcb9 OP-1275 Fix pios_delay DiffuS 2014-09-16 00:42:51 +02:00
Alessio Morale
3c2300ffda OP-1275 Change several parameters const 2014-09-16 00:42:50 +02:00
Alessio Morale
0682e60053 OP-1275 Add a memory barrier before remapping the vector table 2014-09-16 00:42:50 +02:00
Alessio Morale
baad216810 OP-1275 uncrustification 2014-09-16 00:42:50 +02:00
Alessio Morale
55d52ceab0 OP-1275 Working initial PIOS_I2C implementation 2014-09-16 00:42:50 +02:00
Alessio Morale
cd7c76aa13 OP-1275 move implementation specific enums out of common pios_i2c_priv.h 2014-09-16 00:42:50 +02:00
Alessio Morale
5986e72a29 OP-1275 Add SPI Implementation. DMA block transfer needs to be fixed with handling for LDMA_TX and LDMA_RX 2014-09-16 00:42:49 +02:00
Alessio Morale
2ca1adafe5 OP-1275 support HSI oscillator, fix gpio, usart and sys (vector remapping not working yet) 2014-09-16 00:42:49 +02:00
Alessio Morale
ff82d50ee0 OP-1275 add an APP_MINIMAL flag that optionally omits most of the stuffs (flight related stuffs and sensors for example) 2014-09-16 00:42:49 +02:00
Alessio Morale
7a3bc518c2 OP-1275 fixes unused vars in SPL 2014-09-16 00:42:49 +02:00
Alessio Morale
bb7d4aef04 OP-1275 fixes for ld scripts, fix for pios_delay timer setup. pios_sys 2014-09-16 00:42:49 +02:00
Alessio Morale
4d1e8cf5a7 OP-1275 F0 support: fix make scripts, bootloader size, linker scripts, add other missing pios drivers. 2014-09-16 00:42:49 +02:00
Alessio Morale
5ab9806279 OP-1275 add Stack_Change support 2014-09-16 00:42:48 +02:00
Alessio Morale
5a60c254ed OP-1275 copy relevant F1 PiOS drivers (yet unmodified) 2014-09-16 00:42:48 +02:00
Alessio Morale
7eca9f80e3 OP-1275 Initial commit for f0 support: add CMSIS, Std Peripheral drivers 2014-09-16 00:42:48 +02:00
Alessio Morale
b4c1a856c7 OP-1274 Implement 4 bytes aligment for standard malloc (while keeping 8byte alignment for RTOS Stuctures) as done for M3 2014-09-16 00:42:48 +02:00
Alessio Morale
c49497f2e0 Merge branch 'amorale/OP-1434_GPSV9_fc_support' into next 2014-09-15 23:49:54 +02:00
Stefan Karlsson
09a943f17f OP-1493 Make Vehicle and TX Wizards work with the discoveryf4bare target 2014-09-15 23:43:58 +02:00
Stefan Karlsson
dd86e7f9c4 OP-1493 Update BOARD_REVISION for discoveryf4bare and fix AutoUpdate 2014-09-15 23:30:17 +02:00
Laurent Lalanne
48ce38370c OP-1491 HQuad_mixing_values First commit : add QuadH artwork, config tab 2014-09-15 22:25:07 +02:00
Alessio Morale
ece0d64c9f OP-1434 - Update a (old, now wrong) comment 2014-09-15 15:27:19 +02:00
Alessio Morale
3e785cf929 OP-1434 - Use vector_lengthf, fix a typo in a comment 2014-09-14 21:44:41 +02:00
Werner Backes
2f0c43c6e5 Wrong I2C bus used for the onboard magnetometer 2014-09-15 03:11:31 +10:00
Stefan Karlsson
bdbe875a90 OP-1474 Use ActuatorDesiredThrust as default source for TPS 2014-09-14 16:08:21 +02:00
Werner Backes
80b6757ea6 Don't use I-term in the VtolPathFollower's position control loop for now. 
See OP-1483 for why it's considered not to work as expected.
 2014-09-14 15:39:13 +02:00
Alessio Morale
3fd5ca08cd OP-1434 - Switch to common aux mag support library 2014-09-13 16:15:02 +02:00
Alessio Morale
76b9b1c40f OP-1406 - Create a support library to share common calibration and sample publishing logic 2014-09-13 16:14:34 +02:00
Stefan Karlsson
662b29ac05 OP-1474 Include I in the scaling and let the TPS factor piggyback on the speedScaleFactor 2014-09-10 22:49:49 +02:00
Stefan Karlsson
344172e879 OP-1474 Add missing stdint.h include to mathmisc.h 2014-09-10 01:03:49 +02:00
Stefan Karlsson
7afb211330 OP-1474 Revert TPS debugging code 2014-09-10 00:42:40 +02:00
Stefan Karlsson
0e2af9c654 OP-1474 Extract line and curve functions out to mathmisc.h, nan check and unit tests 2014-09-10 00:34:06 +02:00
Alessio Morale
c777f9e194 OP-1406 - Fixes from review comments 2014-09-08 23:24:18 +02:00
Stefan Karlsson
c0152b7e19 OP-1474 Thrust PID scaling 2014-09-08 00:14:49 +02:00
Fredrik Larrson
d91db0af6f Revert "Merge remote-tracking branch 'origin/proff/OP-1373_DSMFixes' into next" 
This reverts commit a39e393274, reversing
changes made to ebfdaf28b5.
 2014-09-08 02:31:02 +10:00
Fredrik Larrson
a39e393274 Merge remote-tracking branch 'origin/proff/OP-1373_DSMFixes' into next 
Conflicts:
	shared/uavobjectdefinition/hwsettings.xml
 2014-09-08 01:54:59 +10:00
Fredrik Larrson
ebfdaf28b5 Merge remote-tracking branch 'origin/havyan/OP-1473_sbus_eof' into next 2014-09-08 01:35:39 +10:00
Corvus Corax
4a19f98c95 OP-1156 hotfix in pathfollower code - use correct VerticalPosPI.Ki and ILimit + uavobject typo 2014-09-06 13:51:30 +02:00
Alessio Morale
cf9329b8ee OP-1440 - Change timing slightly to support also WS2812B 2014-09-06 12:12:11 +02:00
Alessio Morale
233dec6d8d OP-1379 - Various fixes and additions 
- Support blocks of led for notification (that is a certain number of leds between a min and a max index);
- Fix an issue with bogus colours on fast updates at LED N°0.
- Add NOTIFY_SEQUENCE_NULL to skip handling a specific alarm status;
- Adjust sequences and add Config and Receiver Alarms;
- fix issue with Alarm trigger/repetition;
- Enables Notify module only if a WS281x output is enabled.
- Add some documentation for sequence/alarm definitions (sequences.h)
- Make sequences more coherent. All GPS related info are now shown in green.
- Revert to original blinking rate for onboard led
- add Notify on DiscoveryF4Bare target
 2014-09-06 12:11:53 +02:00
Alessio Morale
e549c71da6 OP-1379 - add unit testing 2014-09-06 12:11:52 +02:00
Karl Knutsson
ec0d44e1b0 OP-1473 Fix EOF handling for R7008SB 2014-09-04 18:15:36 +02:00