Oleg Semyonov
469feecb13
pios: remove some unused #defines
2011-09-28 23:40:12 +03:00
Oleg Semyonov
ed8cf89888
Initcall: fix compilation errors for firmware which does not use Initcalls
2011-09-28 22:57:18 +03:00
Oleg Semyonov
a38c569cd0
HwSettings: move Telemetry and add GPS port speed to the HwSettings object
...
TelemetrySettings object removed (saved 200+ bytes of RAM). Telemetry
port speed moved to the HwSettings object. Added GPS port speed setting.
GCS code updated to reflect changes and support both fields.
2011-09-28 22:11:42 +03:00
Oleg Semyonov
53c098dd08
Merge branch 'next' into os/GPS-on-CopterControl_next_v2
...
Conflicts:
flight/OpenPilot/System/pios_board.c
flight/OpenPilot/UAVObjects.inc
shared/uavobjectdefinition/hwsettings.xml
2011-09-28 22:02:02 +03:00
James Cotton
f1e70d2ff5
Merge remote-tracking branch 'origin/msmith/OP-578' into next
2011-09-23 16:43:00 -05:00
James Cotton
acf2aa218b
Merge remote-tracking branch 'origin/stac/upgrade-to-openocd-0.5.0' into next
2011-09-14 11:49:01 -05:00
James Cotton
6457276438
Merge branch 'input_configuration' into next
2011-09-11 18:52:35 -05:00
Oleg Semyonov
7b3056d10f
Input Configuration: fix S.Bus receiver in multi-receiver code
2011-09-12 02:06:48 +03:00
Mike Smith
deade53c5d
OP-578 - check for CODE_SOURCERY before setting -fpromote-loop-indices
2011-09-11 10:49:09 -07:00
James Cotton
01cd2ded57
Mainboard config: The rcvr port is used for PPM/PWM/Spektrum so make these one
...
setting that is mutually exclusive.
2011-09-10 14:20:51 -05:00
James Cotton
eb191d869a
Mainboard: Get spektrum working again.
2011-09-10 14:19:54 -05:00
Stacey Sheldon
2f86e4dd4f
Make PWM/PPM and Servo drivers play nicely together
...
PWM and PPM can now coexist in the same load and be
selected at boot time via the hwsettings UAVObject.
This is basically a complete restructuring of the
way the drivers interact with the TIM peripheral in
the STM32.
As a side effect, the PWM and PPM drivers are now
ready to support multiple instances of each.
This also provides the first step toward being able
to reassign some of the PWM input pins to be servo
output pins. Still more work required, but this is
a good start.
2011-08-27 21:39:56 -04:00
James Cotton
c5746335c6
Initialize GCSReceiver object if it is being used
2011-08-27 15:57:09 -05:00
James Cotton
dc340596f5
Merge branch 'next' into GCS_ChangesToUI-RuntimeCFG
...
Conflicts:
flight/CopterControl/Makefile
flight/OpenPilot/System/pios_board.c
flight/OpenPilot/UAVObjects.inc
flight/PiOS/STM32F10x/pios_spektrum.c
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configgadget.qrc
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
shared/uavobjectdefinition/hwsettings.xml
2011-08-27 15:26:05 -05:00
Stacey Sheldon
f29b99521e
openocd: collapse JTAG rules for STM32F1 and STM32F2
2011-08-27 10:43:02 -04:00
James Cotton
274333a9bf
Merge branch 'next' into stac/use-malloc-failed-hook
2011-08-27 00:12:45 -05:00
Corvus Corax
0065842de7
Makefiles: fixed comment line
2011-08-25 16:28:34 +02:00
Corvus Corax
8173c7b7c6
Refactor GPS_PURISTIC into GPS_MINIMAL
2011-08-25 15:44:49 +02:00
Corvus Corax
3690586f3a
Optional Modules: Forced re-generation of mod init.h when makefile has changed
2011-08-25 15:42:11 +02:00
Corvus Corax
c63a10d05e
CopterControl: Fix GPS buffer sizes
2011-08-25 15:37:38 +02:00
Corvus Corax
4bd72923e5
Merge branch 'CorvusCorax_unidirectional-GPS-com' into CC_GPS
...
Conflicts:
flight/Modules/GPS/GPS.c
flight/Modules/GPS/GTOP_BIN.c
flight/Modules/GPS/NMEA.c
shared/uavobjectdefinition/hwsettings.xml
2011-08-25 15:33:23 +02:00
James Cotton
5f7a9b513a
Merge branch 'sambas/dsmx_stuff' of ssh://git.openpilot.org/OpenPilot into next
...
Conflicts:
shared/uavobjectdefinition/hwsettings.xml
2011-08-24 11:37:30 -05:00
Stacey Sheldon
edc0caf521
heap: set memory critical alarm on malloc failures
...
Activate the FreeRTOS malloc failed hook and use it
to set the memory critical alarm.
2011-08-21 23:14:32 -04:00
Corvus Corax
7395a369a9
Optional Modules: Ported optional module concept to OpenPilot and Sim_Posix
2011-08-20 13:02:44 +02:00
Corvus Corax
53d0732fc6
Enable GPS module as "optional module" in CooterControl
2011-08-20 01:25:49 +02:00
Corvus Corax
dfd301571a
HWSettings: Allow late Initialization and Start of Modules as defined in Makefile(available modules) and UAVObject(actually started modules)
2011-08-20 01:24:06 +02:00
James Cotton
86b652bbab
Merge branch 'next' into camera_stabilization
2011-08-14 18:07:57 -05:00
zedamota
e736b17cc4
Merge remote-tracking branch 'remotes/origin/next' into GCS_ChangesToUI-RuntimeCFG
...
Conflicts:
ground/openpilotgcs/src/plugins/config/config_cc_hw_widget.cpp
ground/openpilotgcs/src/plugins/config/configgadgetwidget.h
ground/openpilotgcs/src/plugins/config/configstabilizationwidget.cpp
2011-08-14 15:48:16 +01:00
James Cotton
f766ba47aa
Increase the size of the eventdispatcher task and lower the maximum queue size.
2011-08-13 19:21:58 -05:00
James Cotton
9c7799dfe6
UAVObject Init: Get rid of deprecated linker init code
2011-08-10 22:48:42 -05:00
James Cotton
f11aa80444
CameraStabilization: Make the CameraStabilization module put the desired
...
position into another object (will help with configuration).
2011-08-09 20:45:38 -05:00
sambas
1e67b5e3b5
DSMx_binder, hw setting 0 disabled, 1-10 bind pulses. Manual disable after successful bind. Only for flexiport.
2011-08-06 22:16:47 +03:00
James Cotton
a592e7d398
ManualControlSettings must be also initialized in pios_board.c
2011-08-04 07:47:50 -05:00
Stacey Sheldon
90b2625deb
rcvractivity: Add tracking of Rx channel activity
2011-08-02 01:27:37 -04:00
Stacey Sheldon
06cdeb7b61
rcvr: support multiple simultaneous receivers
...
Now also supports multiple instances of the Spektrum driver.
These are configured as Spektrum1 and Spektrum2.
2011-08-02 01:22:04 -04:00
Stacey Sheldon
829b8b83f6
rcvr: Add GCS receiver driver for rcvr via telemetry
...
This allows the GCS to emulate a receiver device via the
telemetry link.
Select "GCS" as your input type in the manualcontrol config
screen and calibrate it as normal.
Note: The expected values for the channels are in microseconds
just like a PWM or PPM input device. The channel values
are validated against minimum/maximum pulse lengths just
like normal receivers.
2011-08-02 01:22:04 -04:00
James Cotton
035b4103c4
Need to initialize the HwSettings before using them.
2011-07-31 09:42:15 +09:00
James Cotton
3df730c64f
Merge branch 'stac/refactor-usart-com' into camera_stabilization
2011-07-30 13:38:43 +09:00
James Cotton
387a22398e
Make it possible to optionally enable the CameraStab module
2011-07-30 12:08:47 +09:00
Stacey Sheldon
8c0b60099f
rcvr: don't init spektrum and sbus rcvrs twice
2011-07-29 22:59:50 -04:00
James Cotton
132e19d613
Change the makefiles - always compile the optional objects but the flag
...
indicates whether they are registered
2011-07-30 11:29:29 +09:00
James Cotton
ae67c51632
Register some missing objects with their modules
2011-07-30 11:28:21 +09:00
James Cotton
2e5a36a4db
Merge branch 'stac/refactor-usart-com' into camera_stabilization
2011-07-30 10:55:16 +09:00
James Cotton
b2d2114ede
Disable auto registration of all objects. Later the uavobj_init linker scripts
...
should be deleted to not carry around old code.
2011-07-30 10:24:46 +09:00
James Cotton
23e9b56839
Dos2unix flight/CopterControl/System/coptercontrol.c
2011-07-30 10:06:35 +09:00
James Cotton
96c2d24253
Merge branch 'next' into camera_stabilization
...
Conflicts:
flight/CopterControl/Makefile
flight/CopterControl/System/coptercontrol.c
flight/Modules/Actuator/actuator.c
flight/Modules/GPS/GPS.c
flight/Modules/ManualControl/manualcontrol.c
flight/Modules/Stabilization/stabilization.c
flight/Modules/System/systemmod.c
shared/uavobjectdefinition/manualcontrolsettings.xml
shared/uavobjectdefinition/stabilizationdesired.xml
2011-07-30 10:06:10 +09:00
Stacey Sheldon
c2fb0d8b43
com: allow run-time allocation of buffers
2011-07-29 15:33:14 -04:00
Stacey Sheldon
5f8760a55c
com: Move buffering out of USART/HID layer and into COM layer
...
This allows the spektrum and sbus receiver drivers to bind
directly to the usart layer using a properly exported API
rather than overriding the interrupt handler.
Bytes are now pushed directly from the usart layer into the
com layer without any buffering. The com layer performs all
of the buffering.
A further benefit from this approach is that we can put all
blocking/non-blocking behaviour into the COM layer and not
in the underlying drivers.
Misc related changes:
- Remove obsolete .handler field from irq configs
- Adapt all users of PIOS_COM_* functions to new API
- Fixup callers of PIOS_USB_HID_Init()
2011-07-27 19:45:38 -04:00
Stacey Sheldon
8dbace5ee2
Merge branch 'rcvr_mem_reduction'
...
Conflicts:
flight/PiOS/STM32F10x/link_STM32103CB_CC_Rev1_sections.ld
2011-07-17 17:14:40 -04:00
James Cotton
d41260d54c
Make the stabilization settings query correctly now by increasing the TX buffer
...
on the CC side to 256 bytes instead of 128 to support large objects (max object
size is 256 bytes)
2011-07-15 10:40:21 -05:00
