rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-11-30 08:24:11 +01:00
Code Issues Releases Activity
6,601 Commits 5 Branches 8 Tags 266 MiB
6bfb2a5e45
Commit Graph

129 Commits

Author SHA1 Message Date
James Cotton
6bfb2a5e45 Merge branch 'next' into revo 
Conflicts:
	ground/openpilotgcs/src/libs/opmapcontrol/src/mapwidget/mapgraphicitem.cpp
	ground/openpilotgcs/src/libs/opmapcontrol/src/mapwidget/mapripper.cpp
	ground/openpilotgcs/src/libs/opmapcontrol/src/mapwidget/waypointitem.cpp
	ground/openpilotgcs/src/libs/opmapcontrol/src/mapwidget/waypointitem.h
	ground/openpilotgcs/src/libs/utils/coordinateconversions.cpp
	ground/openpilotgcs/src/libs/utils/coordinateconversions.h
	ground/openpilotgcs/src/plugins/opmap/opmap.pro
	ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
	ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.h
	ground/openpilotgcs/src/plugins/uavobjectwidgetutils/configtaskwidget.cpp
	shared/uavobjectdefinition/taskinfo.xml
	shared/uavobjectdefinition/waypoint.xml
 2012-09-01 16:18:03 -05:00
Stacey Sheldon
29ab1d8cf3 actuator: factor out settings updates from main loop 2012-08-11 19:46:00 -04:00
James Cotton
735c009843 Disable writing to the overo driver for every pios_com write again. It drives 
up system consumption too much, although now data will get lost :(.
 2012-07-25 13:15:47 -05:00
James Cotton
30085d23ff Reenable sending from the overo tx method but no longer yield since we aren't 
using a blocking write anyway.
 2012-07-24 11:29:24 -05:00
James Cotton
a90dd1ef5c For now do not call PIOS_OVERO_WriteData from the Tx method because this is too 
slow (task yield?) and results in a lot of event system errors.
 2012-07-24 11:18:58 -05:00
James Cotton
26f07c21f6 Fix the pios_overo driver for compiling against the bootloader 2012-07-23 10:07:42 -05:00
James Cotton
c5904b4667 Clean up the pios_overo driver. Working well now. 2012-07-20 13:57:47 -05:00
James Cotton
bcdd5a8bba Fixes to the overo module where it was thinking the fifo buffer writes failed 2012-07-20 13:45:31 -05:00
James Cotton
5091b16065 Needs work but it's sending data now 2012-07-20 11:36:49 -05:00
James Cotton
337f0e8bfa Properly enable circular buffering on the overo spi 2012-07-20 10:59:18 -05:00
James Cotton
6a3c067c18 Zero out the packet counter when pios_over is initialized. 2012-07-20 10:45:20 -05:00
James Cotton
fb215fd095 PiOS overo driver wasn't setting it's id and also clearing the DMA IRQ flags 2012-07-20 10:17:57 -05:00
James Cotton
6b3e5573a0 The overosync module now uses pios_com interface. 2012-07-20 09:46:28 -05:00
James Cotton
8fc2d10ea6 Get the pios_overo driver for pios_com compiling 2012-07-20 09:32:22 -05:00
James Cotton
1c4c373b86 Begin rewriting pios_overo to look like a standard com layer 2012-07-20 03:42:09 -05:00
James Cotton
2f64124da8 Updates to the pios_overo driver to fully reinit the dma and spi device between 
packets
 2012-07-17 17:21:28 -05:00
James Cotton
db27653859 Make the Overo module use the new driver 2012-07-17 16:11:23 -05:00
James Cotton
a6ba379af9 PIOS_OVERO driver which handles the communications to the overo and ensures the 
data stays in frame.
 2012-07-17 15:34:54 -05:00
James Cotton
92a0311b32 New pios_overo driver that handles the SPI communications to the overo 2012-07-17 13:31:00 -05:00
James Cotton
821a25e419 For now make the F4 PIOS_ADC return an error code if there is no new data in 
the ADC buffer.  This should be handled appropriately by the caller.
 2012-06-11 09:22:04 -05:00
James Cotton
f5b2575c88 Merge branch 'next' into revo 
Conflicts:
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/Revolution/System/inc/pios_config.h
	package/Makefile
 2012-06-07 12:45:06 -05:00
Mike LaBranche
bf591ebe45 Merge branch 'next' into MikeL 
Conflicts:
	flight/Bootloaders/Revolution/inc/pios_config.h
	flight/Modules/OveroSync/inc/overosync.h
	flight/Modules/Sensors/inc/sensors.h
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/PiOS/STM32F4xx/pios_iap.c
	flight/Revolution/System/inc/pios_config.h
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configccattitudewidget.cpp
	ground/openpilotgcs/src/plugins/config/configvehicletypewidget.cpp
 2012-06-04 15:38:57 -07:00
James Cotton
ed2b9f1f63 Make PIOS_LED init it's GPIO clocks so it doesn't rely on startup code 2012-05-30 10:12:40 -05:00
James Cotton
564c442ac8 Remove some code from Zippe that used a timer to trigger the ADC. We might do 
this again in the future but we need to generalize the configuration.  For now
the ADC is fairly simple requirements on revo for battery monitoring.
 2012-05-28 20:28:48 -05:00
James Cotton
8a6073fbaf Merge remote-tracking branch 'revo/revo-next' into testing 
Conflicts:
	Makefile
	flight/PiOS.osx/osx/Libraries/FreeRTOS/Source/portable/GCC/Posix/port.c
	flight/PiOS.osx/osx/Libraries/FreeRTOS/Source/task.c
	flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/portable/GCC/Posix/port_posix.c
	flight/PiOS.posix/posix/Libraries/FreeRTOS/Source/tasks.c
	flight/Revolution/Makefile
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
	ground/openpilotgcs/src/plugins/uploader/devicewidget.cpp
	shared/uavobjectdefinition/taskinfo.xml
 2012-05-28 09:13:26 -05:00
Stacey Sheldon
c719d5b6cf f4 adc: allow PIOS ADC to be properly excluded from the build 
This was preventing the BL image from building
 2012-05-27 21:36:56 -04:00
James Cotton
af8d65616e Comment out some unused variables in the PIOS_ADC structure for now since they 
were consuming lots of memory.  Probably should make a simple adc version that
just queries the line when needed since we are only using this data at 500 ms.
However, the accumulator scheme in place is quite good for averaging over time.
 2012-05-15 03:48:32 -05:00
James Cotton
bbb14f5f14 Trying to get F4 PIOS_ADC working. Changed from previous implementation timed 
by another timer to running continuously.  May go back to the previous since no
need to get tons of data.
 2012-05-15 03:19:44 -05:00
James Cotton
65065f2588 Fix the ADC code on the BL for revolution 2012-05-12 13:12:56 -05:00
James Cotton
0f2c41ac5d Merge branch 'revolution' into navigation 
Conflicts:
	flight/Modules/ManualControl/manualcontrol.c
	flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
 2012-05-07 21:53:10 -05:00
Sambas
dedbbec8f0 Make guidance support my Y6, also caused telemetry/usb RXdatarate go thru the roof (Guidance Warning). Almost impossible to change dataframe type to supported one with clean board. 
USB interrupt fix.
Heap warning critical sizes backwards.
 2012-05-07 12:51:07 -05:00
James Cotton
513c36f19a Update the F4 ADC to compile again. Still not fully compliant with API but 
then again API is not great and unused currently so no rush.
 2012-05-04 21:37:46 -05:00
James Cotton
e82323af32 Make revolution work with the FreeRTOS queue based MPU6000 driver 2012-04-03 03:41:52 -05:00
Stacey Sheldon
eab923fee0 revo: move fw image into 128KB sectors 
This saves the more versatile 16KB and 64KB sectors
for other purposes.
 2012-03-28 21:52:43 -04:00
Stacey Sheldon
91cffb1809 f4 usb: don't skip yield from ISR 
Function was returning prior to the code that might
need to yield from within the ISR.
 2012-03-27 00:18:44 -04:00
Stacey Sheldon
730defb698 f4 flash: fix flash voltage range setting in bl_helper 
F4 boards are powered by 3.3V which corresponds to
VoltageRange_3.  Fix this to match actual VDD so we
get faster erase/write times.
 2012-03-22 22:37:31 -04:00
Stacey Sheldon
3210bd3f9c f4 usb_dcd: disable FIFO empty IRQ while waiting for tx completion 
CPU was being hammered with FIFO empty IRQs if we queued data but
the host wasn't actively draining the FIFO.

This was entirely unexpected so this hack should probably be
removed once we can figure out why this was happening.

This is almost certainly hiding some other issue.
 2012-03-07 20:36:37 -05:00
Stacey Sheldon
c4bd286739 f4 usb_hid: track whether we have buffers queued on endpoints 
Make sure we don't clobber our endpoint configuration by
double configuring an Rx or Tx buffer against it.  Wait for
the completion of the previous operation before allowing
endpoint configuration again.
 2012-03-07 20:36:36 -05:00
Stacey Sheldon
65fc6104e6 f4 usb_hid: ignore upper layers if USB IF not yet enabled 
Upper (COM) layer was calling down into the HID layer before
the HID interface had been enabled.  This was leading to
interacting with the endpoint Rx and Tx FIFOs prior to init.
The FIFO config was then being clobbered when we the USB IF
was eventually enabled.
 2012-03-07 20:01:35 -05:00
Stacey Sheldon
1f37806eab f4 usb_hid: fix typo in EP IN registration call 
Code was using the size of the Rx buffer instead of the Tx
buffer when registering.  Buffers are currently the same
size so wasn't causing any issues.
 2012-03-07 20:01:35 -05:00
Stacey Sheldon
bc3ee6209c f4 usbhook: drop in/out bit from EP numbers before using as index 
USBHOOK endpoint callback arrays should not be indexed with the
0x80 (in/out) bit set.  Oops.
 2012-03-07 20:01:35 -05:00
Stacey Sheldon
6832a62872 f4 bl_helper: clear all flash errors as we unlock the flash 
Error flags being set were causing flash erase operations to
fail.  Not sure why these flags were set though so this might
be hiding some other problem.
 2012-03-07 19:53:18 -05:00
Stacey Sheldon
4ea1156e7b f4 bl_helper: teach bl_helper about f4 flash sector map 2012-03-07 19:53:17 -05:00
Stacey Sheldon
c854c3f4a4 usbhook: add support in API for deactivating USB 2012-03-07 19:53:17 -05:00
Stacey Sheldon
cb9c3a9b7e usbhook: delete dead code 
Remove old code left-over from porting from F1 to F4.
 2012-03-07 19:53:17 -05:00
Stacey Sheldon
fdf54ab86c hid: fix response to HID descriptor 
HID driver was incorrectly giving back the HID interface
descriptor when asked for the HID descriptor.  This should
let OP boards interact better with generic HID layer drivers
and also gives us nicer output in lsusb once the HID descriptor
is read.
 2012-03-07 19:52:54 -05:00
James Cotton
e3df261213 Merge branch 'stac/revo-usb' into revolution 
Conflicts:
	flight/Revolution/System/pios_board.c
 2012-03-02 13:00:13 -06:00
James Cotton
72a93dbae5 Fix from PT for OSX/Windows F4 USB HID to send the full report size even if not 
all used.
 2012-03-02 11:11:36 -06:00
James Cotton
d8f0494e57 Merge branch 'revolution' into revolution_overo 2012-02-11 20:02:20 -06:00
Alessio Morale
22b211167c Ported pios_iap.c to F4 
restored failed boot count check on pios_board.c for revo
 2012-02-11 13:49:32 +01:00