Stacey Sheldon
8d47dc1fe4
revo usb: apply recent hid+vcp decscriptor changes to revo
2012-05-27 21:35:13 -04:00
James Cotton
2f8049e20a
Update the bootloader hw version for the mpu6000 board and make the sensor code
...
and initialization respond appropriately. Enable hte L3GD20 and BMA180.
Let the board type determine which is used.
2012-03-22 00:41:37 -05:00
James Cotton
e4290d678b
Reenable the pressure sensor and other modules
2012-03-21 00:49:29 -05:00
James Cotton
720684c248
Flag to enable pressure/mag
2012-03-21 00:49:04 -05:00
James Cotton
a77a859e5c
Using some config switches to get this board up and running
2012-03-21 00:48:31 -05:00
James Cotton
bbbca319d8
Merge commit 'c4df0c0ceff8ba985bb20d815f27910b9e59d992' into revolution
2012-03-11 13:14:06 -05:00
Alessio Morale
c4df0c0cef
Support for port remapping on serial ports
...
Support for receiver configuration (PPM, PWM and DSM)
There are still problems with Flexi port (not sure if related to a problem with my board) and Uart/SBUS that has the input always inverted.
2012-03-11 18:38:49 +01:00
James Cotton
61d59828dc
Disable the new features if not revolution and set an error flag. Fixes
...
compilation errors.
2012-03-05 00:24:11 -06:00
James Cotton
e3df261213
Merge branch 'stac/revo-usb' into revolution
...
Conflicts:
flight/Revolution/System/pios_board.c
2012-03-02 13:00:13 -06:00
Stacey Sheldon
e2939dae2a
revo usb: Add support for USB to Revo
2012-02-07 02:25:31 -05:00
James Cotton
e434ab94a9
Enable SPI port for revolution to overo communications
2012-02-02 01:42:38 -06:00
James Cotton
80705cdba1
Flash: Because on CC/CC3D the flash is initialized before FreeRTOS is started
...
we cannot use the transaction lock or the delay while saving.
2012-01-26 11:50:05 -06:00
James Cotton
fe7b9a909a
LED: Update the LEDs on revo
2012-01-26 09:11:27 -06:00
James Cotton
9a12299074
Update the driver cfg structures for the EXTI changes. Make the drivers call
...
the pios_exti_init instead of their individual implementations.
2012-01-23 16:55:52 -06:00
James Cotton
cc0cbf0381
Enable IAP code on revolution now
2012-01-21 13:22:39 -06:00
James Cotton
bb0bfe0ae4
Merge branch 'next' into revolution3
...
Conflicts:
flight/Bootloaders/CopterControl/Makefile
flight/Bootloaders/PipXtreme/Makefile
flight/Bootloaders/Revolution/inc/pios_config.h
flight/CopterControl/Makefile
flight/INS/inc/pios_config.h
flight/Libraries/taskmonitor.c
flight/Modules/Altitude/altitude.c
flight/Modules/Attitude/attitude.c
flight/OpenPilot/Makefile
flight/OpenPilot/Makefile.posix
flight/OpenPilot/System/inc/pios_usb_board_data.h
flight/OpenPilot/System/inc/taskmonitor.h
flight/OpenPilot/System/pios_board.c
flight/OpenPilot/System/taskmonitor.c
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/PiOS/STM32F4xx/pios_bmp085.c
flight/PiOS/STM32F4xx/pios_iap.c
flight/PiOS/pios.h
flight/Revolution/System/inc/pios_config.h
flight/Revolution/System/inc/taskmonitor.h
flight/Revolution/System/taskmonitor.c
ground/openpilotgcs/src/plugins/serialconnection/serialplugin.cpp
shared/uavobjectdefinition/systemalarms.xml
shared/uavobjectdefinition/taskinfo.xml
2012-01-21 11:27:03 -06:00
James Cotton
cc47520baa
Checking ID on ST gyro works
2012-01-04 23:23:42 -06:00
James Cotton
0fbcf7723d
Code to disable all gyros. All modules now running.
2012-01-04 22:37:15 -06:00
James Cotton
0cc18e7dcf
Add files for new L3DG20 sensor
2012-01-04 20:33:54 -06:00
James Cotton
25dfb5463e
Add option to switch to using the MPU6000 accel instead of BMA180. Disabled by
...
default.
2011-12-29 02:08:13 -06:00
James Cotton
bf98630851
Add streaming the sensor data out of the serial port
2011-12-26 17:52:45 -06:00
James Cotton
43fa9e702e
Move DSM to Flexiport and enable GPS on GPS port. Currently GPS module locks
...
up though.
2011-11-28 09:11:13 -06:00
James Cotton
671c7537a0
Reorganize the pios_config.c file for revolution
2011-11-28 08:29:14 -06:00
James Cotton
8bbc767a4e
Get the pressure sensor working and reading into Revolution
2011-11-27 00:52:09 -06:00
James Cotton
e24c905ff7
F4 PiOS: Reimplement the RTC logic for F4
2011-11-26 22:13:57 -06:00
James Cotton
04f4afce46
Set idle load for revo
2011-11-26 15:52:04 -06:00
James Cotton
57b381235e
Init the timers and PWM in the board file
2011-11-26 02:19:56 -06:00
James Cotton
7637e9f669
Get flash chip working and saving to memory. Also get the I2C working with
...
BMA180 driver.
2011-11-19 00:13:02 -06:00
James Cotton
0efffef1fa
Work on bringing the Revolution board up
2011-11-17 10:13:34 -06:00
James Cotton
4c04d01be4
Dos2unix pios_config.h for revo
2011-11-14 10:25:57 -06:00
James Cotton
e32cc92002
For now act like revo is using init call system to fix compile errors.
2011-11-14 10:25:28 -06:00
James Cotton
76a956416c
Switch revo over to MPU6050
2011-11-13 19:45:06 -06:00
James Cotton
1e2fe77e3f
Start migrating the attitude solution to FreeRTOS
2011-11-13 18:51:35 -06:00
James Cotton
2b37d4bbb5
Enable telemetry on revo
2011-11-13 16:10:19 -06:00
James Cotton
0ce80e02f5
Compiles now
2011-11-02 02:51:20 -05:00
James Cotton
48d2e038bb
More work to the revolution build
2011-11-01 04:39:20 -05:00
