Corvus Corax
37df2bcbf4
OP-742: Merge branch 'corvuscorax/airspeed_fixes' into revo-fixes
...
Conflicts:
flight/RevoMini/Makefile
2012-12-29 12:09:58 +01:00
Corvus Corax
d7319c21dc
OP-700 temporarily disable VtolPathFollower until it has been fixed
2012-12-21 12:05:47 +01:00
Brian Webb
076a3fa715
Merge remote-tracking branch 'origin/brian/rfm22_autoconf' into brian/rfm22_autoconf
2012-12-17 19:41:47 -07:00
Brian Webb
9225debdc1
Added initialization of the ECC, which was removed with the removal of the packet handler. Removed a couple of test functions from RadioComBridge module. Turned on watchdog timers in RadioComBridge (and RFM22B driver).
2012-12-17 19:33:42 -07:00
James Cotton
4c2de5a140
PiOS simulation: Implement pios_com->available for simulators
2012-12-16 16:24:16 -07:00
Brian Webb
9765244753
Removed (now unused) packet_handler.c
2012-12-16 09:31:21 -07:00
Brian Webb
c4c58331e5
RM: Now doesn't crash when the radio is disabled.
2012-12-16 09:16:19 -07:00
Brian Webb
0dd8caeec0
Removed oplink UAVObjects from the RevoMini target.
2012-12-15 15:39:11 -07:00
Brian Webb
e0acb41379
Removed some unintended changes to RevoMini.
2012-12-15 10:35:51 -07:00
Brian Webb
43f6b4150f
RFM22: Don't send status until the link is connected.
2012-12-15 09:56:27 -07:00
Brian Webb
3a1803b7a1
Added RFM22B (OPLink) receiver.
2012-12-13 21:07:19 -07:00
Brian Webb
6e929d7a92
Fixed configuration of PPM input.
2012-12-12 20:27:08 -07:00
Brian Webb
90e0746ade
RFM22B: Changed default (initial) air baud rate to 9600. Also some code cleanup.
2012-12-11 19:23:59 -07:00
Brian Webb
1d7e4e0fc2
Reduced length of transmit window period to 8 ms from 16 ms.
2012-12-11 17:44:22 -07:00
Brian Webb
8ead1200b9
RFM22B: Added timing synchronization on transmit to try to eliminate both sides transmitting at the same time. This now achieves virtually 0 re-transmissions for close range transmission while transmitting both full telemety and PPM at 64k.
2012-12-11 17:44:20 -07:00
Brian Webb
7f6a718354
RFM22B: Added optional debug signals on the telemetry port of the PipX. Also fixed a couple of bugs that were causing excessive re-transmissions (found using the debug signals).
2012-12-11 17:44:19 -07:00
Brian Webb
fecc23eb49
RFM22B/OPLink: Auto-configuration of remote com port now working.
2012-12-11 17:44:17 -07:00
Brian Webb
6ffe518509
RFM22B: Improved link stability, and added tracking of error encountered in the processes of transmitting and receiving.
2012-12-11 17:44:15 -07:00
Brian Webb
4cb311538a
RFM22B: Improved reliability, especially with reconnection after a timeout, although there is still too many resent packets.
2012-12-11 17:44:14 -07:00
Brian Webb
7a930807aa
RM: Fixed initialization of the debug console.
2012-12-11 17:44:12 -07:00
Brian Webb
6ed9b63da9
RFM22B: Changing configuration parameters over-the-air working. Added tracking of Tx/Rx sequence number. Still seeing too many resent packets.
2012-12-11 17:44:11 -07:00
Brian Webb
0dce12e984
RFM22B: Finised handshacking on ACK and changed the link quality metric to use resent packets rather than missed packets.
2012-12-11 17:44:09 -07:00
Brian Webb
7aaa02268f
RFM22B: Added TX Resent to OPLink status. Also removed the need for the packet queue.
2012-12-11 17:44:08 -07:00
Brian Webb
fa5f7a8fdd
RFM22B: All packets are now ACKed, and added a formal connection request / accept that will be used or auto-configuring the remote modem.
2012-12-11 17:44:06 -07:00
Brian Webb
98026966f7
RFM22B: Added PPM packets to rfm22 driver.
2012-12-11 17:44:04 -07:00
Brian Webb
04da5d2377
USB/COM/RFM22B: Added a standard com callback to test for link availability. This replaces the PIOS_USB_CheckAvailable function with a generic PIOS_COM_Available function. This is now used by the RFM22B com driver to test if a good link is up. This was originally written by James, and Brian merged it into the latest RFM22B branch.
2012-12-11 17:44:03 -07:00
Brian Webb
e36bd678e1
RFM22B: Allow a receive to happen between transmitts.
2012-12-11 17:44:01 -07:00
Brian Webb
9f43e1151c
RFM22B: Fixed status reporting and connection status for OPLink.
2012-12-11 17:44:00 -07:00
Brian Webb
15fc29560a
RM: Remove configuration of the RFM22B from the RevoMini pios_board.c. This is in preparation for auto-configuration.
2012-12-11 17:43:58 -07:00
Brian Webb
bd42083376
RFM22B: Changed the way the frequencies and power settings are set for the rfm22b device.
2012-12-11 17:43:55 -07:00
Brian Webb
dae382564a
RFM22B/RM: Added rfm22b com device, moved remaining functionality in the radio module to the rfm22 driver, and simplified configuration of the PipX/OPLink. The radio device now presents itself completely as a com device, both in RadioComBridge (OPLink devices) and Telemetry (RM). Also change the PipXStatus and PipXSettings UAVOs to OPLinkStatus/OPLinkSettings.
2012-12-11 17:43:53 -07:00
Brian Webb
0113b6a748
Added UAVTalkRelayInputStream to the UAVTalk library that parses a UAVTalk packet and sends it when it is complete. This allows the interlieving of packets on an output UAVTalk stream, and is used by the OPLink device to relay packets from an input com port to a different output com port without sending one packet in the middle of another packet.
2012-12-11 17:43:50 -07:00
Brian Webb
4b90f81f6f
RFM22B: Modified the method of tracking RX errors, and now reporting Good, Corrected, Error, and Missed packets to the GCS. Also removed some less useful fields from the PipXStatus.
2012-12-11 17:43:49 -07:00
Corvus Corax
7ac258352a
OP-753 - prevent flying in wrong direction in FlyVector mode.
2012-12-04 16:18:24 +01:00
a*morale
3dc11b297b
Enabled airspeed module on RevoMini target
2012-12-02 17:14:54 +01:00
Oleg Semyonov
9420a76820
[OP-724] Better name for dT according to OPReview-368 comment
2012-12-02 14:09:21 +02:00
Oleg Semyonov
41d56b282e
[OP-724] Remove LPF from throttle input channel (not necessary)
2012-12-02 13:50:03 +02:00
Erik Gustavsson
5132448fe8
Decrease zeroing yawBiasRate to reduce noise-induced random yaw drift.
2012-11-29 18:56:33 +01:00
Oleg Semyonov
cc98962c36
[OP-724] Provide generic gimbal type
2012-11-29 18:03:05 +02:00
Oleg Semyonov
8adc2abd77
[OP-724] Now most camera options can be set independently per each axis.
2012-11-29 17:39:10 +02:00
Oleg Semyonov
5784ea8b36
[OP-724] Provide Actuator option to disable selected channels and use it for 7s camera boot delay
...
Actuator did not provide an option to completely shutdown selected channels
(set PWM pulse = 0). It is useful for camera stabilization boot delay (we
want few seconds of gimbal servo inactivity to calibrate gyros). It also
might be useful for failsafe on some channels. This option is now available.
It is used to disable camera outputs during fixed 7s delay after boot
instead of setting them to minimum position.
As a side effect, few bugs are fixed (ticks should be multiplied by
portTICK_RATE_MS, not divided, to get time in ms). And few floating point
operations were optimized out as well.
ActuatorCommand.UpdateTime was promoted to uint16 because it is not unusual
to have it 20000ms during flash updates (was seen on the CC after UAV
settings import). So it should be 16bit as well.
2012-11-29 17:39:09 +02:00
Oleg Semyonov
8f5fb5aeb0
[OP-724] Add camera gimbal filtering and feed forward options
...
This is a partial rework of Cossacs' camera gimbal software.
This patch adds LPF to airframe attitude used for camera stabilisation
and feed forward for camera actuators. Either of options can be
disabled on the compilation level to save flash and RAM if not
required.
Original Cossacs' code was optimized and code flow shortcuts were
added where applicable.
2012-11-29 17:39:08 +02:00
Oleg Semyonov
ee333f1569
[OP-724] Add manual control input filtering (useful for camera gimbal)
...
This is a partial rework of Cossacs' camera gimbal software.
This patch adds LPF to some of manual control inputs. Mostly
useful are accessory channels (for camera gimbal control) and
yaw channel (for smooth filming). The code may be used for
stand-alone CC[3D]-based gimbal software, but also should work
for complete FC+camera system.
2012-11-29 17:39:07 +02:00
Oleg Semyonov
ea1199603b
Merge remote-tracking branch 'origin/rel-12.10.2' into next
...
Conflicts:
MILESTONES.txt
2012-11-29 17:31:50 +02:00
Erik Gustavsson
4312652241
Use enum to index array.
...
Replace 0 with 0.0f in assignment.
2012-11-29 00:03:39 +02:00
Erik Gustavsson
5e14f5352f
Minor codestyle/whitespace cleanup
2012-11-29 00:03:38 +02:00
Erik Gustavsson
dc5394dcf3
Add setting to suppress axis output from Stabilization module until armed and throttle is applied. Useful to keep the tail prop out of the grass while arming a tri.
2012-11-29 00:03:37 +02:00
Oleg Semyonov
96c7ec37a9
Merge remote-tracking branch 'origin/hyper/flight_uavo_access_type_safety' into next
2012-11-24 16:33:19 +02:00
a*morale
20eb2d7b98
Fixed RTC clock
2012-11-23 19:43:31 +01:00
a*morale
2d83e8a779
Fixes for SBUS support on RM2.
...
Note: it needs the RTC timing to be fixed as it seems that it runs at half its nominal 625Hz value
2012-11-23 19:41:23 +01:00
