a*morale
9aa088fb98
battery module: prevent the initial ramp up of the power supply to be identified as a low voltage condition
2012-06-15 19:43:47 -05:00
James Cotton
f8d196ffe8
Added support for board voltage monitor to battery module.
...
The module can be configured to enable what's needed from board voltage, battery voltage and battery current measurement.
In GCS the POWER box in system healt will show alarm related to the supply voltage to the board.
If a power warning/critical alarm is raised, the warning condition is left even if the board voltage return to an acceptable value.
Conflicts:
ground/openpilotgcs/share/openpilotgcs/diagrams/default/system-health.svg
shared/uavobjectdefinition/systemalarms.xml
2012-06-15 19:43:34 -05:00
James Cotton
416618a26f
Show the altitude on the map
2012-06-15 16:01:15 -05:00
James Cotton
495bb280c7
Suppress long standing error message from telemetry we've had for ages. It
...
probably should be fixed properly though.
2012-06-15 15:51:40 -05:00
James Cotton
be360d3c21
Fix waypoint visualization in OPMap to work for multiple maps
2012-06-15 15:51:12 -05:00
James Cotton
5b2f4d6d91
Remove an outdated connect in waypointeditor
2012-06-15 14:56:55 -05:00
James Cotton
62436270e3
When moving waypoints on the map, keep the previous altitude
2012-06-15 13:15:45 -05:00
James Cotton
1ac807e1e0
Fix small bugt in the revo calibration
2012-06-15 13:15:21 -05:00
James Cotton
07f8922f2f
Merge remote-tracking branch 'origin/MikeL_ConfigVehicle' into revo
2012-06-14 19:18:23 -05:00
Mike LaBranche
c1689b2205
VehicleConfig: add set/getThrottleCurve, enhance configwidgets to consume;
...
add resetMixerVector call in multirotor; ConfigVehicleType now VehicleConfig aware
2012-06-14 15:40:17 -07:00
James Cotton
97483bddad
Fix some indentation in the mag calibration code and no need to clear the gyro
...
accumulator.
2012-06-14 10:07:45 -05:00
James Cotton
f1aad76f71
Reorder functions for six point calibration to make more sense (the order they
...
are run) and add some comments
2012-06-14 10:06:39 -05:00
James Cotton
a91c21f53f
Don't restore the accel metadata after six point calibration unless it was
...
actually saved and changed
2012-06-14 09:57:46 -05:00
James Cotton
4f37be785e
Merge branch 'next' into revo
2012-06-14 01:02:03 -05:00
James Cotton
70606a46a1
Include initial gyro bias calibration into the level calibration of revo like
...
it is with CC.
2012-06-13 23:07:23 -05:00
James Cotton
03705771dd
Get the sensor noise measurement working again, but through GCS now
2012-06-13 22:11:00 -05:00
James Cotton
ce487c9b0a
Fix the bias calculation for revo accels
2012-06-13 21:15:46 -05:00
James Cotton
293a2ee573
Rename some of the revo calibration methods
2012-06-13 18:14:20 -05:00
James Cotton
f07e1fc4e1
Separately store initial meta data for accel and mag
2012-06-13 18:09:10 -05:00
Mike LaBranche
a7ae258bc8
Bugfix, oops: missed a couple resetMixerVector opportunities.
2012-06-13 15:14:18 -07:00
Mike LaBranche
8de40c7847
BugFix: ConfigFixedWing reset the mixer vectors to zero prior to writing anew.
2012-06-13 15:09:54 -07:00
Mike LaBranche
8283d4280e
UAVTalk, change private member QIODevice* io to smart pointer QPointer<QIODevice>
2012-06-13 14:57:43 -07:00
James Cotton
fc6f0f5d4d
Actually disable the 6 point calibration define
2012-06-13 14:52:34 -05:00
James Cotton
28b967689f
Remove some debugging output from configTaskWidget. In the case of the sensor
...
calibration which doesn't have any fields associated this caused a null pointer
crash and wasn't useful anyway.
2012-06-13 13:22:39 -05:00
James Cotton
d94ab30616
Make sure we don't use null pointers when refreshing the revo sensor bar graphs
2012-06-13 13:19:17 -05:00
James Cotton
7f15e87890
Make revo calibration UI use teh configtaskwidget system
2012-06-13 13:12:46 -05:00
James Cotton
7c8700b4e5
Suppress a warning and fix indentation in configgadgetwidget
2012-06-13 13:01:41 -05:00
James Cotton
49b51163bc
Rename method and UI in revo calibration to fit new uavos and stop referring to
...
things as AHRS
2012-06-13 12:41:21 -05:00
James Cotton
b074b1f712
Work on the OSX packaging to get it working for revo and to package OSG.
2012-06-13 12:30:07 -05:00
James Cotton
8ded4618ef
Only perform six point calibration on the mag. This code is #ifdef'd out
...
because we might still want the option or need it for factory calibration. I
usually find the accel scale is reproducibly at 0.98.
2012-06-13 12:28:59 -05:00
James Cotton
d45fae1380
For now disable the bootloader updaters from being built with packaging. They
...
aren't packaged into the distributable and the bu_revolution breaks.
2012-06-13 02:58:44 -05:00
James Cotton
c9e99295ed
Merge branch 'next' into revo
2012-06-13 00:46:19 -05:00
James Cotton
295fa4a8f3
Fix bug where the aircraft gadget initially shows the quad tab but the selector
...
says plane.
2012-06-12 23:12:53 -05:00
James Cotton
9218145aa9
Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into revo
2012-06-12 22:53:30 -05:00
Brian Webb
c06412f83b
Removed some qDebug from PipX configuration widget.
2012-06-12 20:00:58 -07:00
Brian Webb
aa8ba898fc
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-06-12 19:49:03 -07:00
Brian Webb
69a38ddd77
PipX configuration screen improvements.
2012-06-12 19:48:31 -07:00
Brian Webb
33cae7645d
Fixed calculation of retries on PipX.
2012-06-12 19:48:21 -07:00
James Cotton
9c1fa2dfc6
Revert "Get mag before gyros so that when gyro chip is acting up we still see mag data."
...
This reverts commit d2a3e39bbf
2012-06-12 13:10:24 -05:00
James Cotton
1fad5c9fc2
Fix the stabilization expert UI so the label is in the right place
2012-06-12 01:52:32 -05:00
James Cotton
bfdda0e645
Fix the stabilization expert UI so the label is in the right place
2012-06-12 01:51:57 -05:00
Brian Webb
ce9d96e1b1
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-06-11 21:30:31 -07:00
James Cotton
9e3884059e
Merge branch 'next' into revo
2012-06-11 14:48:27 -05:00
James Cotton
9870abcd2f
Fix some slots in config revo calibration
2012-06-11 14:42:08 -05:00
James Cotton
8b9c7277a6
Remove the connection to refreshWidgetValues() in output widget. Mike was
...
right and it's not needed since hte configTaskWidget takes care of this
connection.
2012-06-11 13:24:37 -05:00
James Cotton
dba47a7d41
Remove the connection to refreshWidgetValues() in output widget. Mike was
...
right and it's not needed since hte configTaskWidget takes care of this
connection.
2012-06-11 13:22:37 -05:00
James Cotton
01d47d6373
Accidental semicolon led to MPU6000 always failing self test. Another bug
...
masked that behavior. I suck.
2012-06-11 12:22:24 -05:00
James Cotton
a029fc4656
Merge branch 'next' into revo
...
Conflicts:
Makefile
2012-06-11 12:05:38 -05:00
James Cotton
93b77becc0
More the system task priority down and increase the timeout for erasing the
...
flash so it says completed. However, it still blocks the system for a long
time. During an erase the heartbeat will flash at 10 Hz to indicate what's
happening.
This still blocks telemetry even after lowering hte system priority (and there
is a vTaskDelay) which makes me think that the SPI bus being locked is blocking
Sensors or somethign else. This should not be permited when the system is
armed.
The reason the system locks up during the erase is that the file system
operations occur within the event dispatcher thread. It is very bad practice
for anything to block this (i.e. callbacks should never take very long). We
should probably move the object persistence handling into the system thread or
something but that can be a separate issue.
2012-06-11 12:03:32 -05:00
James Cotton
6f09b6d087
Fix misnamed slot in the output widget
2012-06-11 11:31:28 -05:00
