Stacey Sheldon
94f6344fc5
hid joystick: restructure joystick HID report to work on windows
2012-08-07 21:34:25 -04:00
Stacey Sheldon
017d8c79c9
hid joystick: add missing .c file
...
This time for sure...
2012-08-06 11:49:03 -04:00
Stacey Sheldon
d44e24a150
hid joystick: add missing .h files
2012-08-06 11:42:44 -04:00
Stacey Sheldon
ef0c12b1b6
hid joystick: emulate a USB HID joystick using RC Transmitter
...
Adds a new RCTransmitter setting for the USB HID interface which
emulates a USB HID joystick. The scaled RC receiver channels
from any RCVR protocol are passed through to the various emulated
joystick controls.
The main use for this feature is to allow you to use your own RC
transmitter with any RC simulator on a PC.
This is known to work with CRRCsim but should work with any simulator
that supports joystick input.
2012-08-05 21:45:27 -04:00
James Cotton
652647fc87
Make autotuning module optional
2012-08-03 09:37:46 -05:00
Sambas
e59f99bc8e
Wave audio player test app.
2012-07-30 11:45:36 +03:00
Sambas
52c3627bb2
OSD uSDcard support, settings save/load works (tested on 128MB card). booting takes some time for some reason.
2012-07-30 11:45:22 +03:00
Sambas
ad0473e646
proper use of i2c transfer, return 0 is all ok, original code locked the transfer when all ok.
2012-07-30 11:41:25 +03:00
Sambas
79be7613b5
CC mag&baro for OSD, bmp needed some black magic hacking
2012-07-30 11:40:16 +03:00
James Cotton
f02aacfeb6
Change the constant so LED flashing works properly on Revo
2012-07-28 11:22:24 -05:00
James Cotton
735c009843
Disable writing to the overo driver for every pios_com write again. It drives
...
up system consumption too much, although now data will get lost :(.
2012-07-25 13:15:47 -05:00
James Cotton
30085d23ff
Reenable sending from the overo tx method but no longer yield since we aren't
...
using a blocking write anyway.
2012-07-24 11:29:24 -05:00
James Cotton
a90dd1ef5c
For now do not call PIOS_OVERO_WriteData from the Tx method because this is too
...
slow (task yield?) and results in a lot of event system errors.
2012-07-24 11:18:58 -05:00
James Cotton
26f07c21f6
Fix the pios_overo driver for compiling against the bootloader
2012-07-23 10:07:42 -05:00
Stacey Sheldon
f5db83bd20
Merge remote-tracking branch 'op-public/next' into revo-next
...
Conflicts:
flight/Libraries/inc/NMEA.h
flight/Modules/GPS/GPS.c
flight/Modules/GPS/NMEA.c
flight/Modules/GPS/UBX.c
flight/Modules/GPS/inc/NMEA.h
flight/Modules/GPS/inc/UBX.h
flight/Modules/PathPlanner/inc/pathplanner.h
flight/PiOS/STM32F10x/link_STM32103CB_PIPXTREME_sections.ld
flight/Revolution/System/inc/pios_config.h
flight/Revolution/UAVObjects.inc
flight/SimPosix/UAVObjects.inc
ground/openpilotgcs/src/plugins/hitlv2/aerosimrc/src/qdebughandler.h
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
shared/uavobjectdefinition/gpsvelocity.xml
2012-07-22 23:39:37 -04:00
James Cotton
c5904b4667
Clean up the pios_overo driver. Working well now.
2012-07-20 13:57:47 -05:00
James Cotton
bcdd5a8bba
Fixes to the overo module where it was thinking the fifo buffer writes failed
2012-07-20 13:45:31 -05:00
James Cotton
5091b16065
Needs work but it's sending data now
2012-07-20 11:36:49 -05:00
James Cotton
337f0e8bfa
Properly enable circular buffering on the overo spi
2012-07-20 10:59:18 -05:00
James Cotton
6a3c067c18
Zero out the packet counter when pios_over is initialized.
2012-07-20 10:45:20 -05:00
James Cotton
fb215fd095
PiOS overo driver wasn't setting it's id and also clearing the DMA IRQ flags
2012-07-20 10:17:57 -05:00
James Cotton
6b3e5573a0
The overosync module now uses pios_com interface.
2012-07-20 09:46:28 -05:00
James Cotton
8fc2d10ea6
Get the pios_overo driver for pios_com compiling
2012-07-20 09:32:22 -05:00
Kenz Dale
1d976b3095
dded support for multiple airspeed sources. Added GPS airspeed estimation. Extended BaroAirspeed UAVO. Added new AirspeedSettings UAVO.
2012-07-20 13:08:54 +02:00
James Cotton
1c4c373b86
Begin rewriting pios_overo to look like a standard com layer
2012-07-20 03:42:09 -05:00
James Cotton
7492d34d25
Merge branch 'overo_control' into revo
2012-07-19 08:35:39 -05:00
James Cotton
5ebd368b18
Merge branch 'next' into revo
...
Conflicts:
flight/PiOS/STM32F10x/link_STM32103CB_PIPXTREME_sections.ld
2012-07-19 08:35:30 -05:00
James Cotton
2f64124da8
Updates to the pios_overo driver to fully reinit the dma and spi device between
...
packets
2012-07-17 17:21:28 -05:00
James Cotton
db27653859
Make the Overo module use the new driver
2012-07-17 16:11:23 -05:00
James Cotton
a6ba379af9
PIOS_OVERO driver which handles the communications to the overo and ensures the
...
data stays in frame.
2012-07-17 15:34:54 -05:00
James Cotton
92a0311b32
New pios_overo driver that handles the SPI communications to the overo
2012-07-17 13:31:00 -05:00
James Cotton
719772c98a
Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into next
2012-07-16 11:42:29 -05:00
James Cotton
6b101d71af
Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into revo
2012-07-15 12:32:35 -05:00
James Cotton
ce6bebceb6
Also strex needs to not clobber it's register to have predictable results.
...
OPReview-227
2012-07-14 19:47:03 -05:00
Michael Hope
fa3aa20e05
ld: make sure current pointer never goes backwards
...
Fixes linking on ld version 2.22. Identical to 3cbf4499.
2012-07-14 19:47:03 -05:00
Michael Hope
0efb24a54b
The destination register of an exclusive store must be
...
different from both the value and address register. Fix building with
recent binutils by marking the result as early clobber.
2012-07-14 19:47:03 -05:00
James Cotton
8d4e221412
Remove the disable IRQ commands in PIOS_COM since they aren't needed.
2012-07-13 11:54:12 -05:00
James Cotton
d150fd5331
Merge branch 'next' into revo
...
Conflicts:
flight/Modules/ManualControl/manualcontrol.c
ground/openpilotgcs/src/plugins/config/input.ui
ground/openpilotgcs/src/plugins/uavtalk/telemetry.cpp
shared/uavobjectdefinition/manualcontrolsettings.xml
2012-07-13 10:40:14 -05:00
Brian Webb
3fabdb9963
Fixed conflicted merge with origin/next.
2012-07-11 19:25:05 -07:00
Stacey Sheldon
54a161a3d4
Merge remote-tracking branch 'op-public/next' into revo-next
...
Conflicts:
shared/uavobjectdefinition/manualcontrolsettings.xml
2012-07-08 18:14:09 -04:00
Laura Sebesta
0a34b786a9
Modified pios_adc.c to remove race condition by which the ADC value was reset to 0.
2012-07-08 22:23:05 +02:00
Laura Sebesta
4f20a0f9a1
Added drivers for analog airspeed sensors: MPXV5004 and MPXV7002.
2012-07-08 21:46:59 +02:00
Stacey Sheldon
2396eaef5a
uavobjectmanager: simplify new embedded metadata objects
...
Simplifies some of the code that handles the
metadata objects which are now embedded within
the data UAVOs.
2012-07-07 21:49:53 -04:00
Brian Webb
3405bc3ebe
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-06-30 10:06:51 -07:00
Brian Webb
10e52b31c5
Added the ability on the PipX to specify if a comport is used to connect to the GCS (ground side), so it will receive status, etc, or UAVTalk (flight side). The data passing in RadioComBridge was also made more uniform, which allows for easier reconfiguration.
2012-06-30 10:06:28 -07:00
James Cotton
cd311642dd
Merge branch 'next' into revo
2012-06-28 10:35:47 +02:00
Stacey Sheldon
154d971d4d
flash: don't call vTaskDelay() before OS init
...
PIOS_Flash_Jedec_EraseChip is called during early
init when the table_magic has changed. This call
happens on CC/CC3D prior to the OS being initialized
so it is not OK to call vTaskDelay() yet.
This was leading to boards locking up (no flashing blue
LED) immediately after jumping to the application when
the table_magic had changed or was being init'd for the
very first time.
2012-06-24 12:23:34 -04:00
Stacey Sheldon
f475088585
Merge remote-tracking branch 'op-public/next' into revo-next
2012-06-20 22:45:41 -04:00
James Cotton
f8d196ffe8
Added support for board voltage monitor to battery module.
...
The module can be configured to enable what's needed from board voltage, battery voltage and battery current measurement.
In GCS the POWER box in system healt will show alarm related to the supply voltage to the board.
If a power warning/critical alarm is raised, the warning condition is left even if the board voltage return to an acceptable value.
Conflicts:
ground/openpilotgcs/share/openpilotgcs/diagrams/default/system-health.svg
shared/uavobjectdefinition/systemalarms.xml
2012-06-15 19:43:34 -05:00
James Cotton
01d47d6373
Accidental semicolon led to MPU6000 always failing self test. Another bug
...
masked that behavior. I suck.
2012-06-11 12:22:24 -05:00
