Corvus Corax
fe7d2e8bca
removed pathplannersettings module from gcs
2012-11-11 14:57:39 +01:00
Oleg Semyonov
db63f73859
GCS vehicle config: do not reset existing camera/accessory mixers [OP-691]
...
Still no fix for helicopter config (some code refactoring is desired).
2012-11-11 15:01:30 +02:00
Stacey Sheldon
e2b019edd9
telemetry: stop registering periodic events for non-periodic UAVOs
...
Telemetry module was iterating over all UAVOs including
meta UAVOs and creating a periodic event item for each
object. These items cost us about 32 bytes for each list
item.
This is wasteful for two main reasons. First, meta UAVOs can't
meaningfully have periodic updates so excluding them entirely
makes sense. That halves the number of objects in this list since
there is one meta object for every data object. This is worth
about 500 bytes of RAM on CC.
Second, about half of the remaining UAVOs are not periodic by
default so they're wasting memory unless someone happens to want
to make them periodic at runtime. This is worth another 450 bytes
of RAM on CC.
So, objects that are configured as periodic during board init will
support all of the periodic config at runtime. Objects that are
*not* periodic during board init can only be made periodic on the
next boot.
Each object that you make periodic during init will cost you an
extra 32 bytes of RAM.
With erased settings, free RAM comparison for CC is:
Before: 2736 bytes free
After: 4048 bytes free
Total RAM savings with this update is 1312 bytes!
2012-11-10 18:04:16 -05:00
Oleg Semyonov
bac0e15519
Update HISTORY.txt with last releases info
2012-11-11 00:36:16 +02:00
Richard Flay (Hyper)
54ebcb1ea8
Removed a spurious call to AccelsSet() that was causing garbage data to be transiently written to the Accels UAVO. Props to cyr for kicking off the discussion that led to the discovery of this bug.
2012-11-11 00:31:08 +02:00
lilvinz
a7029baa32
pios_jedec: fixed usage of uninitialized memory
...
When reading the jedec device id the code only transfered one byte via spi leaving
the expected input buffer uninitialized. This may lead to the problem that flash
initialization fails because the expected input may be whatever the stack was set
when entering the function. The impact of the bug is somewhat limited tough as the
initialization usually takes place before starting up the rtos and thus is pretty
deterministic. So if the code passed init while testing it should pass init in
production as well.
2012-11-11 00:31:07 +02:00
Richard Flay (Hyper)
b620c6ebc8
Added support for Mode 3 and Mode 4 to the TX Configuration Wizard. Fixed a number of bugs and issues in the wizard. Made some changes to wizard text and layouts as well.
2012-11-11 00:31:06 +02:00
James Cotton
5f80268396
GCS Config: Crashing for an unknown board seems a bit harsh.
2012-11-11 00:31:05 +02:00
David Ankers
43e6b38b54
Spelling of Spectrum to Spektrum
2012-11-11 00:31:05 +02:00
Richard Flay (Hyper)
eda6b6a24a
Improved type-safety. Replaced flight side UAVO access macros with inline functions to ensure that correct pointer types are always passed to UAVO access functions.
2012-11-10 20:47:10 +10:30
Corvus Corax
064ed4087c
set AirspeedActual from attitude module, feed true airspeed estimation into EKF to allow more accurate INS
2012-11-08 11:30:58 +01:00
Corvus Corax
8dd5d5a68b
type fix in header file
2012-11-08 11:12:05 +01:00
Corvus Corax
e9da78406a
Merge branch 'corvuscorax/baro_fixes' into corvuscorax/airspeed_fixes
2012-11-08 09:48:01 +01:00
Corvus Corax
b09027afe5
Completely refactored airspeed module, now a pure sensor input module without any complex sensor fusion features -- changed driver for mpxv analog airspeed to be more versatile
2012-11-08 01:31:21 +01:00
Erik Gustavsson
104c61a174
Move accel filter to separate function, for cleaner code and easier filter alteration.
...
Optimize for filter disabled case (AccelTau = 0.0).
2012-11-06 20:17:10 +01:00
Corvus Corax
5981d9acd6
removed surplus NEDposition uavobject
2012-11-06 10:13:09 +01:00
Corvus Corax
3c8ffa9773
Revert "When in indoor mode reset the baro offset to zero"
...
This reverts commit 9c512261e6
2012-11-06 09:42:14 +01:00
Corvus Corax
e8232ba825
Pathplanner: removed pathPlannersettings and preprogrammed (hardcoded) paths
2012-11-05 16:04:45 +01:00
Corvus Corax
cc8e56f170
OP699: changed update rate to use constant
2012-11-05 15:59:13 +01:00
Corvus Corax
ce595a06d9
Merge remote-tracking branch 'baseorigin/revo/corvuscorax/airspeed_fixes' into corvuscorax/airspeed_fixes
...
Conflicts:
flight/RevoMini/UAVObjects.inc
2012-11-05 15:16:03 +01:00
Corvus Corax
8f5b2954ac
Airspeed module: use stored calibration if available
2012-11-05 10:59:06 +01:00
Corvus Corax
5bf18780c1
do not calibrate if there is a pre-stored calibration value
2012-11-05 10:41:24 +01:00
Corvus Corax
4367bd62bf
OP-699 : removed unnecessary object queue in pathplanner
2012-11-05 10:34:44 +01:00
Corvus Corax
e5ab038a89
removed unnecessary comment
2012-11-05 10:33:51 +01:00
Corvus Corax
e2ca9cbb45
OP-699 - refacor ugly buzzer code actuaor module
2012-11-05 10:09:43 +01:00
a*morale
774dde3da5
Normalized the HW configuration to point to _RM_ configuration settins
2012-11-04 13:37:06 +01:00
a*morale
920c2682d2
Fixed UAVObjects.inc for RM to cope with airsped fixes
2012-11-04 11:37:41 +01:00
a*morale
75730e7260
Merge branch 'revo-next' of ssh://git.openpilot.org/revo into revo-next
2012-11-03 21:36:51 +01:00
a*morale
0df1c22933
Fixed channel group for DSM on flexyport
2012-11-03 20:41:33 +01:00
Corvus Corax
3f248915cb
Merge remote-tracking branch 'origin/revo-next' into corvuscorax/airspeed_fixes
2012-11-03 20:03:18 +01:00
a*morale
99165abaf7
Merge branch 'revo-next' of ssh://git.openpilot.org/revo into revo-next
2012-11-02 23:28:04 +01:00
a*morale
553b49cdbf
Fixed Flexy serial assingment and added case for telemetry on flexy port
2012-11-02 23:27:15 +01:00
a*morale
3affe846db
Added support for TxPID for RM
2012-11-02 18:06:26 +01:00
a*morale
cfbdaddc94
Fixed invalid value for MS5611 oversample configuration
2012-11-02 17:31:51 +01:00
Erik Gustavsson
677f921b15
Take magnitude of filtered gravity vector into account.
2012-11-02 09:22:18 +01:00
Erik Gustavsson
f63db712d0
Disable accel smoothing during init/arming so it does not interfere
2012-11-02 09:12:24 +01:00
Stacey Sheldon
9d1825f8a8
Merge remote-tracking branch 'op-public/next' into revo-next
...
Conflicts:
shared/uavobjectdefinition/groundtruth.xml
2012-11-01 23:23:33 -04:00
Erik Gustavsson
b7bdf9861d
Run rotated gravity vector through smoothing filter to match phase with filtered accelerometer data.
2012-11-01 12:14:33 +01:00
Richard Flay (Hyper)
10865221b9
Removed a spurious call to AccelsSet() that was causing garbage data to be transiently written to the Accels UAVO. Props to cyr for kicking off the discussion that led to the discovery of this bug.
2012-11-01 18:15:47 +10:30
Corvus Corax
e8c209145e
Merge branch 'revo-next' into corvuscorax/airspeed_fixes
2012-11-01 07:29:14 +01:00
Corvus Corax
f5ad9ae3f0
OPmap: fixed some bugs introduced by merge with james/revo
2012-11-01 07:22:15 +01:00
Corvus Corax
fbacf627ce
Added AirspeedActual to RevoMini
2012-11-01 05:04:55 +01:00
Corvus Corax
ffaab02479
Use Correct Airspeed object in PathPlanner, (and use CalibratedAirspeed, since its more relevant)
2012-11-01 03:46:29 +01:00
Corvus Corax
3458aec53e
Merge branch 'revo-next' into corvuscorax/airspeed_fixes
2012-11-01 03:40:20 +01:00
Sambas
949b17baae
this made GCS tx rate go over 3000
2012-10-31 20:59:40 -04:00
Sambas
32e3f2e631
this made GCS tx rate go over 3000
2012-10-31 21:15:39 +02:00
Erik Gustavsson
c207afbfef
Implement smoothing filter for accelerometer data.
2012-10-31 19:05:59 +01:00
Stacey Sheldon
492fbc88b0
revomini: remove references to POI UAVOs
2012-10-30 21:47:17 -04:00
Sambas
f189596b3d
bootfix, GPS module not included
2012-10-30 20:51:13 +01:00
Sambas
019691e49d
Compile fixes
2012-10-30 20:50:58 +01:00
