Stacey Sheldon
5ca4ec7934
ppm: adjust min frame pulse width for 8ch x 18ms frames
...
All channels at max when using the FrSKY 4ch D4FR in PPM
mode results in the frame pulse shrinking well below our
threshold of 3800us and we lose frame.
With all 8 channels at max, the frame pulse becomes
indistinguishable from the other channels. Using all 8
channels with the FrSKY in PPM mode is NOT recommended
even after this change.
Recommend using at most 7 active channels in this mode so
we can still find the frame pulse.
2012-04-16 14:33:28 -04:00
James Cotton
b0ef456ccb
Kickstart MPU6000 if there is no data
2012-04-13 20:29:41 -05:00
James Cotton
a0d1b00ade
Cover an edge condition for the MPU6000 IRQ not firing
2012-04-13 19:37:30 -05:00
Brian Webb
4936cd8fd2
Added PipXStatus and PipXSettings UAVObjects and added support the sending/receiving UAVTalk objects on the PipX.
2012-04-10 20:22:53 -07:00
Brian Webb
3914d22b09
Turned off watchdog timer, which was crashing on real PipX.
2012-04-07 19:56:12 -07:00
Brian Webb
e639d173a0
Create ID from a hashed CPU serial number.
2012-04-07 19:41:23 -07:00
Brian Webb
7b49a6b820
Added watchdog to radio com bridge in PipXtreme.
2012-04-07 19:12:49 -07:00
Brian Webb
f4d886de75
Added support for determining when the radio->com link is between UAVTalk packets. This is required to inject UAVTalk messages into the message stream.
2012-04-07 18:17:57 -07:00
Brian Webb
0f9f897870
Added PPM packet to packet handler, created replacement system module for PipXtreme (PipXtreme module), removed all UAVObjects from PipXtreme, and added parsing of incoming (over USB/COM) UAVTalk stream.
2012-04-07 18:17:32 -07:00
Brian Webb
56a2006fd8
Reconfigured to run on the real PipX board.
2012-04-06 18:44:31 -07:00
Brian Webb
eeb96955f9
Fixed ADC configuration
2012-04-06 17:43:43 -07:00
Brian Webb
253de47967
Merge remote-tracking branch 'raid/Brian-PipXtreme-V2' into Brian-PipXtreme-V2
2012-04-06 17:37:31 -07:00
Brian Webb
bc1adb2519
Some cleanup of rfm22 driver.
2012-04-06 17:36:35 -07:00
Brian Webb
fff93910e2
RFM22B device now fully interrupt driven. Packet handeling moved to RadioComBridge module.
2012-04-05 20:24:50 -07:00
James Cotton
e82323af32
Make revolution work with the FreeRTOS queue based MPU6000 driver
2012-04-03 03:41:52 -05:00
James Cotton
bb41bc1472
Add no for DIAG_TASKS to make file to make it easier not to miss.
2012-04-03 02:07:04 -05:00
James Cotton
d7cb232315
Add MPU6000 accel range to config structure. Also put in correct values.
2012-04-03 02:07:04 -05:00
James Cotton
3346e848e0
Attitude error timeout was 2 ms when sensors at 500 Hz. Caused lots of errors
...
and overwhelmed event system.
2012-04-03 02:07:04 -05:00
James Cotton
3f22ef8c66
Slow MPU6000 on CC3D to 500 Hz
2012-04-03 02:07:04 -05:00
James Cotton
35854b35f6
MPU6000 accel value coming out twice as high as it should. Need to store scale
...
in cfg structure to fix this properly.
2012-04-03 02:07:04 -05:00
James Cotton
8032130769
Slow down gyro a bit on CC to give the CPU some breathing room. Might need to
...
come down more.
2012-04-03 02:07:03 -05:00
James Cotton
a960f3d07e
Switch the MPU6000 driver to using a FreeRTOS queue. Need to update Revo code
...
to take advantage of this.
2012-04-03 02:07:03 -05:00
James Cotton
1415728762
Get the MPU6000 CC3D working. Right now the ADC system is commented out, which
...
will break regular CC.
2012-04-03 02:07:03 -05:00
James Cotton
a0b7453580
Make the firmwareIAP variable not a global
2012-04-03 02:07:03 -05:00
Stacey Sheldon
9b33be5d65
ef: pad any gaps between the BL bank and the FW bank
...
The Entire Flash (EF) image for revo has a gap between
the end of the BL bank and the start of the FW bank.
This fills the gap with 0xFF and properly aligns the
FW image in flash.
2012-04-01 22:39:27 -04:00
Brian Webb
df0a1c2ac1
Upgraded Brian-Metadata-Mods to current next.
2012-04-01 12:25:13 -07:00
Brian Webb
496a323b7f
Fixed indentaion.
2012-03-31 07:59:44 -07:00
Stacey Sheldon
eab923fee0
revo: move fw image into 128KB sectors
...
This saves the more versatile 16KB and 64KB sectors
for other purposes.
2012-03-28 21:52:43 -04:00
Stacey Sheldon
f971fc14d5
openocd: update to latest git snapshot (f1c01333)
2012-03-27 00:53:27 -04:00
Stacey Sheldon
91cffb1809
f4 usb: don't skip yield from ISR
...
Function was returning prior to the code that might
need to yield from within the ISR.
2012-03-27 00:18:44 -04:00
Corvus Corax
0742c88a98
enabled optional rtation of Revolution board
2012-03-26 05:25:52 +02:00
Corvus Corax
d32dd0ccd4
Fixed fmod() versus fmodf() usage in flight/...
2012-03-26 04:16:54 +02:00
Brian Webb
1669f00456
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-03-24 15:21:16 -07:00
Brian Webb
23f6c8af73
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-03-23 20:49:12 -07:00
Stacey Sheldon
730defb698
f4 flash: fix flash voltage range setting in bl_helper
...
F4 boards are powered by 3.3V which corresponds to
VoltageRange_3. Fix this to match actual VDD so we
get faster erase/write times.
2012-03-22 22:37:31 -04:00
James Cotton
8059004755
Make sure if an event has a null handle and the queue is full we don't try and
...
query UAVObjID
2012-03-22 10:46:30 -05:00
James Cotton
c7ff2a46c7
Merge remote-tracking branch 'origin/laurent/modelview' into revolution
...
Conflicts:
flight/CopterControl/Makefile
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configgadgetwidget.h
2012-03-22 02:58:24 -05:00
James Cotton
2f8049e20a
Update the bootloader hw version for the mpu6000 board and make the sensor code
...
and initialization respond appropriately. Enable hte L3GD20 and BMA180.
Let the board type determine which is used.
2012-03-22 00:41:37 -05:00
James Cotton
6350ec575e
Merge remote-tracking branch 'origin/os/features/stick-deadband-next' into next
...
Conflicts:
ground/openpilotgcs/src/plugins/config/configinputwidget.cpp
2012-03-21 16:03:40 -05:00
James Cotton
e7ca02c038
Initialize mag before mpu6000. Seems more reliable but I don't know why.
2012-03-21 03:42:15 -05:00
James Cotton
e4290d678b
Reenable the pressure sensor and other modules
2012-03-21 00:49:29 -05:00
James Cotton
720684c248
Flag to enable pressure/mag
2012-03-21 00:49:04 -05:00
James Cotton
a77a859e5c
Using some config switches to get this board up and running
2012-03-21 00:48:31 -05:00
James Cotton
6b88a278b3
Disable overosync by default. It was triggering event system warnings due to
...
the extra updates from altholdsmoothed. Increase queue size when reenabled.
Also AltHold is is trigger warnings because other tasks starve it during
startup.
2012-03-21 00:29:09 -05:00
James Cotton
f4663b98e4
When the event system or object manager has an error store the object ID in the
...
SystemStats.
2012-03-20 23:18:07 -05:00
Brian Webb
fc2d81cd8c
Added optional ADC initialization to PipXtreme (turned off).
2012-03-19 17:59:05 -07:00
Brian Webb
fdf853a2fe
Cleaned up the PipXtreme makefile.
2012-03-18 19:26:18 -07:00
Brian Webb
823b111d60
Added Reed-Solomon error correction to PipXtreme. The code is a slight modification of rsscode ( http://rscode.sourceforge.net ). Packet acking has also been turned on as the default, so each packet is error corrected, and if errors remain, the packet is NACKed, otherwise it is ACKed. Also temporarily turned off UAVTalk parsing. This was causing the CC to be identified as a PipX due to the PipX sending UAVObjects (I believe) from the system module. The system module is going to have to be modified/replaced for the PipX.
2012-03-18 17:43:29 -07:00
Brian Webb
aba3789d87
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into Brian-Metadata-Mods
2012-03-18 13:28:11 -07:00
Brian Webb
346ae1bc6e
Removed crc from PipXtreme build.
2012-03-18 10:29:28 -07:00
