1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2025-01-19 04:52:12 +01:00

1191 Commits

Author SHA1 Message Date
Alessio Morale
8eaf7f9918 OP-1793 - Fix enabling condition for baro temp correction 2015-03-18 04:44:02 +01:00
Alessio Morale
a6b43ecef0 OP-1793 - Apply accel bias before scaling 2015-03-18 04:43:30 +01:00
Steve Evans
ba217a3d7d OP-1289 Revise naming of mainQueue to queue
As per review comments

+review OPReview-985
2015-03-17 20:52:08 +00:00
Steve Evans
45005a167f OP-1289 Revise naming of the two channels of data and associated functions
The code now uses a "local" prefix to refer to the telemetry channel
associated with a port on the FC and a "radio" prefix to refer to the
telemetry channel associated with the OPLink/USB.

+review OPReview-985
2015-03-15 23:11:42 +00:00
Steve Evans
12d3bdbe8a OP-1289 add per channel port selection routines
+review OPReview-985
2015-03-15 18:19:19 +00:00
Alessio Morale
4e9d092b03 OP-1776 - Disable radioRx task if radio is not enabled, fix for comments 2015-03-15 16:26:56 +01:00
Alessio Morale
7c9f6c0ed5 OP-1776 - Missing change from review 2015-03-15 14:36:23 +01:00
Steve Evans
5952cfa275 Year is 2015 2015-03-15 00:48:36 +00:00
Steve Evans
6bb732fb02 OP-1289 Need Revo to send two telemetry streams for OSD and GCS 2015-03-14 23:58:18 +00:00
Alessio Morale
bb0e03e387 OP-1776 - Further cleanup/optimization for ProcessTelemetryStream* functions 2015-03-14 14:39:02 +01:00
Alessio Morale
a418ca349f OP-1776 - Fixes from review 2015-03-14 13:46:08 +01:00
abeck70
5c9b6fac29 OP-1769 uncrustify 2015-03-14 12:15:59 +11:00
abeck70
5e7a3c30e1 OP-1769 ground actuator
code review comment addressed to reduce code size
2015-03-14 12:01:30 +11:00
abeck70
dd2733d73f OP-1769 Ground support review comments 2015-03-11 13:49:21 +11:00
Alessio Morale
2a729c1742 OP-1776 - Optimize RX exchanging, changes for radiocombridge 2015-03-11 00:54:02 +01:00
Alessio Morale
5657f4757b OP-1776 - Optimize RX exchanging buffers instead of working a byte at time 2015-03-10 20:35:40 +01:00
abeck70
f053954228 OP-1769 CC compile fixes 2015-03-10 23:07:14 +11:00
abeck70
52147333ed OP-1769 Ground Support
1. Receiver.c for ground allows disabled channels for all but yaw and throttle
2. Reciever.c applies a deadband on throttle 0 position
3. Arming understands ground have a 0 throttle position
4. Actuator optimisations in general and fixes for mixing
5. Actuator mixer support for reversible motors
2015-03-10 22:54:51 +11:00
Erik Gustavsson
ae24359fb4 OP-1739 Always clear ubxLastAck & ubxLastNak when sending UBX message 2015-03-04 19:38:40 +01:00
Erik Gustavsson
0610262cc3 OP-1739 Add (untested) BeiDou support to flight side. 2015-03-01 17:28:43 +01:00
Erik Gustavsson
60736ea82d OP-1739 Fill all UAVO slots with SV data 2015-03-01 16:44:30 +01:00
Erik Gustavsson
76ff576b38 uncrustify 2015-02-28 13:18:24 +01:00
Erik Gustavsson
4ada3d90d9 OP-1739 Add "Default" setting to GNSSMode which skips the GNSS selection
during autoconfig, e.g. for use with UBX6
2015-02-28 13:17:22 +01:00
Erik Gustavsson
d6bc3878d3 OP-1739 Check for NAKs in autoconfig 2015-02-28 12:25:24 +01:00
Erik Gustavsson
1024406fd9 OP-1739 Only include SVs with SNR>0 in "GPSSatellites", making better
use of the 16 slots available.
2015-02-28 11:01:08 +01:00
Erik Gustavsson
baddff3639 OP-1739 Extend SVINFO to 32 SVs. Make UBX parser handle > 256 bytes
payload.
2015-02-28 10:48:26 +01:00
Erik Gustavsson
f5b4e4da37 Remove infinite loop from autoconfig state machine. 2015-02-28 08:09:45 +01:00
Erik Gustavsson
2c403d5323 OP-1739 Add GNSS mode to GPS settings UAVO. 2015-02-28 08:09:45 +01:00
Erik Gustavsson
2029255538 OP-1739 Add CFG_GNSS message to autoconfig, with GPS and GLONASS configurable 2015-02-28 08:09:45 +01:00
Alessio Morale
83ce7c7b9a OP-1750 - cause compiler to trigger an error if a case is missing 2015-02-27 04:01:37 +01:00
Alessio Morale
86111ddefd OP-1750 - don't waste cycles by rescheduling each StateEstimation sub-step 2015-02-26 06:58:57 +01:00
Alessio Morale
a01cab1e72 OP-1743 - Fix attitude issue on CC3D 2015-02-24 22:39:34 +01:00
Alessio Morale
bcbb1d08e4 Merge branch 'amorale/OP-1743_fix_cc_target' into next 2015-02-24 22:26:10 +01:00
Alessio Morale
a30f115567 OP-1743 - Fix uninitialized objects usage 2015-02-24 22:02:56 +01:00
Alessio Morale
84465ae0cb OP-1743 - Fix a very ugly error in attitude(cc/cc3d) 2015-02-24 22:02:25 +01:00
abeck70
c5275fc89b OP-1744 fix crash on revo with ubx config 2015-02-24 22:40:49 +11:00
abeck70
0cd7e20425 Merge branch 'amorale/OP-1685_various_fixes' into test-oneshot 2015-02-23 16:47:12 +11:00
Alessio Morale
ad42ca7f16 Merge remote-tracking branch 'origin/amorale/OP-1658_sensor_overhaul_next' into next 2015-02-22 16:28:04 +01:00
Alessio Morale
1f5f5747f7 OP-1685 - Fix glitches on output settings save. It was due to wrong check for bankmode changes. 2015-02-22 14:21:23 +01:00
Alessio Morale
2a90e86e58 OP-1685 - Try to avoid unneded updates to prevent output glitches 2015-02-22 13:12:00 +01:00
Alessio Morale
0cd545f5e4 OP-1658 - Fix ms5611 units 2015-02-20 05:47:31 +01:00
Laurent Lalanne
26ec24f5b1 Merge remote-tracking branch 'origin/laurent/OP-1601_CC3D_Ubx_only' into next 2015-02-18 02:58:19 +01:00
Alessio Morale
39513f0533 OP-1685 - Rename OneShot to PWMSync to avoid confusion 2015-02-17 23:20:07 +01:00
Alessio Morale
46521f1c2d Merge remote-tracking branch 'origin/amorale/OP-1683_syncupdate_oneshot' into next 2015-02-08 17:59:59 +01:00
Laurent Lalanne
f92eba93ef OP-1601 Ubx only, more efficient to save Ram on CC/CC3D 2015-02-07 17:02:59 +01:00
Laurent Lalanne
f378ca6da7 Merge branch 'laurent/CC3D_Nmea_Gps_14.10' into laurent/CC3D_next_Ubx_only 2015-02-07 14:04:58 +01:00
Laurent Lalanne
5c08f013f1 Allow multiples talkers IDs, define some debug messages and typos 2015-02-06 19:50:09 +01:00
Laurent Lalanne
58e70b2e3a CC3D special firmware : Nmea GPS 2015-02-06 16:59:41 +01:00
Alessio Morale
85335d62a9 OP-1658 - Fix some headers, remove unused files 2015-02-03 00:33:15 +01:00
Alessio Morale
0cf5d163d1 OP-1658 - Fixes for CC3D and its attitude module 2015-02-03 00:00:06 +01:00