Lalanne Laurent
8fe6ba2e2e
Merged in f5soh/librepilot/LP-198_Detect_ppm_signal_lost (pull request #139 )
...
LP-198 Detect ppm signal lost
2016-01-09 12:56:51 +01:00
Fredrik Arvidsson
bc80c66c2b
LP-196 Removed some leftover code and definitions.
2016-01-07 14:22:52 +01:00
Fredrik Arvidsson
359266ab7a
LP-104 Removed support for HoTT on Main port on coptercontrol target since it does not work.
2016-01-07 13:01:46 +01:00
Fredrik Arvidsson
08237a1ff5
LP-196 Removed EX.Bus on Main port for CopterControl target since it is not working.
2016-01-06 17:17:02 +01:00
Fredrik Arvidsson
c8edd023a2
LP-196 Cleaned up some code.
2016-01-06 17:16:02 +01:00
Fredrik Arvidsson
534ff1ff3c
LP-196 Added Auto-Baud-Rate code. Will toggle between high (125 KBaud) and low (250 KBaud) baud rate every EXBUS_BAUD_RATE_LIMIT (set to 64 right now).
...
Cleaned out some unused variables.
2016-01-05 14:03:15 +01:00
Philippe Renon
6b39fc0800
uncrustify
2016-01-04 21:41:45 +01:00
unknown
d00c169dbb
LP-196 Fixed bug in Ex.Bus decoder and changed baud rate for UART to 125 kbaud.
2016-01-03 18:27:14 +01:00
Alessio Morale
b099571e05
LP-207 - Inline some util functions
2015-12-29 23:25:35 +01:00
Alessio Morale
fe217796b5
LP-207 - Implement Fast callback option
2015-12-29 23:25:30 +01:00
Laurent Lalanne
71a0a563f1
LP-204 Replace fast_invsqrtf() with invsqrtf() : 1.0f / sqrtf()
2015-12-26 14:26:36 +01:00
Fredrik Arvidsson
4b8582a3ad
LP-196 Added support for targets Revolution and RevoNano.
2015-12-26 13:08:07 +01:00
Fredrik Arvidsson
3e920bc5bc
LP-196 Added driver for Jeti EX.Bus protocol. Added support for CopterControl target on Main and Flexi port. This is WIP and not tested yet.
2015-12-26 12:29:04 +01:00
Fredrik Arvidsson
879c8fc9b9
LP-104 Correction of @author tag when multiple authors are present.
2015-12-22 18:00:49 +01:00
Fredrik Arvidsson
3d56c4f384
LP-104 Updated copyright headers with LibrePilot
2015-12-22 09:23:57 +01:00
Fredrik Arvidsson
68ff383637
LP-104 Adding HoTT support for Revolution and Revo Nano.
2015-12-20 23:45:37 +01:00
Fredrik Arvidsson
5273df263c
LP-104 Reverted stack size for receiver module after testing.
2015-12-20 21:11:15 +01:00
Fredrik Arvidsson
7a95050381
LP-104 Added missing code to receiver.c to detect receiver activity. This probably caused a crash on any activity of the HoTT receiver.
...
Added 40 bytes to the receiver stack.
Added options to receiver activity.xml uavo definition.
2015-12-20 13:36:45 +01:00
Fredrik Arvidsson
e6d4638201
LP-104 Adds support for Graupner HoTT SUMD/SUMH serial protocol used by receivers on Main and Flexi port.
...
Still work in progress. Only supports CopterControl target and crashes on input :(
2015-12-20 11:08:15 +01:00
Laurent Lalanne
aff3f4bd3a
LP-198 Detect PPM signal lost for stm32f4xx familly
2015-12-18 15:12:44 +01:00
Ákos Máté
f2867fbba1
Workaround for the turnigy 9x stock receiver with PPM encoder.
...
LP-198 The receiver holds the last value on channel 4 and 5, when no signal.
Without the workaround, CC3D can not detect the loss of signal.
2015-12-18 15:09:25 +01:00
Lalanne Laurent
3faa8d621a
Merged in f5soh/librepilot/LP-191_Txwizard_more_robust (pull request #133 )
...
LP-191 Receiver activity : Increase min range value and allow all Sbus channels scanning.
2015-12-17 16:54:06 +01:00
Lalanne Laurent
32337668a6
Merged in f5soh/librepilot/LP-195_Update_World_Mag_Model (pull request #135 )
...
LP-195 Update to lasted world mag model : WMM2015
2015-12-17 16:53:18 +01:00
Cliff Geerdes
c65702b1d3
LP-83 fix two known bricking scenarios
2015-12-16 01:46:59 -05:00
Alessio Morale
ff335072d0
Merged in paul_jewell/librepilot/LP-119_fix_pios_msheap (pull request #58 )
...
Changed incorrect #if to #ifdef in pios_msheap.c
2015-12-13 19:11:46 +01:00
Alessio Morale
48653de561
Merged in physicsboy0709/librepilot/add_stm32f427family_support (pull request #91 )
...
LP-149 Add STM32F427/429/437/439 chip support, preparation for brand new board. and minor fixes
2015-12-13 19:11:25 +01:00
Laurent Lalanne
108bd8edb4
LP-195 Update to lasted world mag model : WMM2015
2015-12-13 12:59:25 +01:00
Laurent Lalanne
309f5db956
LP-191 Receiver activity : Increase min range value and allow all Sbus
...
channels scanning.
2015-12-04 20:36:51 +01:00
Cliff Geerdes
bb04d62756
LP-145 uncrustify and comments
2015-11-15 18:42:47 -05:00
Cliff Geerdes
44a57cb308
LP-145 reduce UBX false positive red X from 1 in 256 NMEA packets to 1 in 64k
2015-11-15 18:13:51 -05:00
Cliff Geerdes
f0ef594cdb
LP-145 CC3D GPS reparse and general GPS system health
2015-11-15 03:44:28 -05:00
Laurent Lalanne
2295208abe
LP-182 Add empty line before #ifdef and after #endif
2015-11-14 14:27:12 +01:00
Laurent Lalanne
705bd2a483
LP-182 Set telemetry port baudrate settings or still to default 57600.
2015-11-13 15:18:17 +01:00
Alessio Morale
70faa04b0a
LP-97 - Move board init function declarations to a pios_board_init.h, fix some headers
2015-11-08 18:47:31 +01:00
Cliff Geerdes
e0a805518f
LP-73 uncrustify
2015-10-25 23:59:52 -04:00
Cliff Geerdes
5cb042e703
LP-73 fw_gpsplatinum build
2015-10-24 14:57:12 -04:00
Cliff Geerdes
d5bdc41fb9
LP-73 finish the merge with next
2015-10-24 13:14:52 -04:00
Cliff Geerdes
04e3bbd4ce
LP-73 fix fw_osd build poke wdg in startup
2015-10-24 12:23:13 -04:00
Cliff Geerdes
afc96267d3
LP-73 use simple timed DataAvailable
2015-10-24 12:23:12 -04:00
Cliff Geerdes
7de55812dd
LP-73 changes for pull request comments
2015-10-24 12:09:22 -04:00
Cliff Geerdes
a110eeda21
LP-73 Remove changes to CopterControl
2015-10-24 12:09:22 -04:00
Cliff Geerdes
d9b7a0bb00
LP-73 port extmag to all other boards
2015-10-24 12:09:21 -04:00
Cliff Geerdes
b086d1a021
LP-73 ExtMag fix some more watchdog issues
2015-10-24 12:09:20 -04:00
Cliff Geerdes
d4b0d106f8
LP-73 External Mags on I2C initial coding
2015-10-24 12:09:19 -04:00
Tianhe Wang
033180b986
pios_msheap.c edited online with Bitbucket
...
revert this file, there is already another pull request.
2015-10-13 13:13:11 +00:00
physicsboy0709
1807c5c27e
modified: flight/pios/common/libraries/msheap/pios_msheap.c
...
modified: flight/pios/stm32f4xx/library.mk
new file: flight/pios/stm32f4xx/link_STM32F4xx_RQ_bl_memory.ld
new file: flight/pios/stm32f4xx/link_STM32F4xx_RQ_fw_memory.ld
new file: flight/pios/stm32f4xx/link_STM32F4xx_RQ_sections.ld
new file: flight/pios/stm32f4xx/link_STM32F4xx_RQ_sections_compat.ld
modified: flight/pios/stm32f4xx/pios_bl_helper.c
modified: flight/pios/stm32f4xx/pios_flash_internal.c
modified: flight/pios/stm32f4xx/pios_sys.c
2015-10-12 14:38:30 -04:00
Alessio Morale
b1cc3926df
Merged in skarlsso/librepilot/skarlsso/LP-129_remove_broken_scalemotor_modes (pull request #75 )
...
LP-129 Remove broken motor scaling modes
2015-09-27 13:47:29 +02:00
Stefan Karlsson
51f0b74e5c
LP-129 Remove broken motor scaling modes
2015-09-24 23:02:09 +02:00
a*morale
84950bd413
Uncrustify
2015-09-24 22:33:57 +02:00
Stefan Karlsson
2ab6390cf5
LP-128 Fix scaleMotor attitude problems
...
The ElevateAndCompress scaling mode doesn't scale linearly as intended
and causes motors to reach the max limit prematurely.
A new mode, MoveAndCompress, has been implemented to get better linear
scaling of the motor output values.
2015-09-22 21:25:56 +02:00
Alessio Morale
f3b44ebd50
Merged in alessiomorale/librepilot/amorale/LP-89_port_150501_fixes (pull request #66 )
...
Amorale/lp 89_port_150501_fixes
2015-09-21 12:35:36 +02:00
Alessio Morale
627185c0ce
LP-89 - changes to adhere to LP code style and requirements.
2015-09-19 16:05:49 +02:00
Alessio Morale
d20d1ab295
LP-89 - Port OP_15.05.01 fixes. Release notes:
...
--- RELEASE-15.05.01 HOTFIX --- Banana Split ---
This release fixes an important bug. All Revolution hardware running 15.05 should upgrade to 15.05.01. Note that this is a hotfix; it can
simply be flashed without an erase settings. Furthermore, please review your vtolpathfollowersettings:HorizontalVelMax; a value of around 4m/s would be more appropriate for preliminary trialing of a new release and will be changed in future.
Release Notes - OP Next Generation - Version OP15.05.01
** Bug
* [NG-55] - 15.05 PositionHold exhibits fly-away behaviour at the vtolpathfollowersettings maxRollPitch and HorizontalVelMax values.
---
WHATSNEW.txt | 13 ++++++++++-
flight/libraries/pid/pidcontroldown.cpp | 26 ++++++++++-----------
flight/libraries/plans.c | 28 +++++++++++++++++++----
flight/modules/PathFollower/inc/pidcontrolne.h | 1 -
flight/modules/PathFollower/pidcontrolne.cpp | 23 +++++++++++++++----
flight/modules/PathFollower/vtolflycontroller.cpp | 16 ++++++++-----
6 files changed, 77 insertions(+), 30 deletions(-)
2015-09-19 16:05:49 +02:00
a*morale
68ecefa0fd
LP-124 - Rename Pitch/RollRatePid to EasyTuneRatePitch/Roll, UAVO and firmware fixes
2015-09-19 15:03:17 +02:00
Alessio Morale
b6515a2117
LP-123 - EasyTune for yaw should only be enabled if any other (roll/pitch) option is also enabled
2015-09-19 12:04:37 +02:00
Alessio Morale
3e7a53beaf
Merged in f5soh/librepilot/laurent/LP-114_Add_accessory_input_channel (pull request #54 )
...
LP-114 Add accessory input channel
2015-09-15 23:21:04 +02:00
Alessio Morale
d67f15713f
Merged in alessiomorale/librepilot/amorale/LP108_mpu6k_fixes (pull request #45 )
...
LP-108 - Fix Temp calculation, get rid of floatin point operations within ISR
2015-09-15 23:20:08 +02:00
Paul Jewell
5517ff322e
Changed incorrect #if to #ifdef in pios_msheap.c
2015-09-13 12:39:03 +01:00
Laurent Lalanne
8885180fde
LP-114 Add Accessory3 as input - TxWizard and Multirotor Accessory
...
mapping
2015-09-11 00:04:31 +02:00
Stefan Karlsson
a7c592b294
LP-115 Fix TPS and Acroplus settings setup
...
Both TPS and Acroplus had settings initialized in SettingsUpdatedCb.
These values comes from stabSettings.stabBank, which isn't initialzed
when SettingsUpdatedCb is first called.
The patch moves the setup of the affected settings values to
BankUpdatedCb, where other bank specific settings are updated.
2015-09-09 01:27:20 +02:00
Alessio Morale
bc89c79b7d
Merged in skarlsso/librepilot/skarlsso/LP-107_scaleMotor_bug (pull request #46 )
...
skarlsso/lp 107_scalemotor_bug
2015-09-08 15:27:51 +02:00
a*morale
792835c009
Uncrustify
2015-09-05 11:49:43 +02:00
Alessio Morale
1f09d36638
Merged in f5soh/librepilot/laurent/LP-44_Free_memory_CC3D (pull request #40 )
...
LP-44 Save RAM
2015-09-04 09:47:33 +02:00
Alessio Morale
970ae3df00
LP-97 - Fixes for Osd and discoveryf4bare
2015-09-03 23:40:37 +02:00
Alessio Morale
06f59d2c40
LP-96 - Call CPU idle calibration function from SystemMod
2015-09-03 23:40:35 +02:00
Alessio Morale
4c2557c29a
LP-96 - remove unused files
2015-09-03 23:40:35 +02:00
Alessio Morale
b88681c69f
LP-97 - Move the common Init process within the System module (coptercontrol/revolution)
2015-09-03 23:40:24 +02:00
Alessio Morale
3eaf1ef3c3
LP-96 - Implement CPU idle counters and calibration functions
2015-09-03 20:05:25 +02:00
Alessio Morale
fb3e65e057
LP-44 - some optimizations and cleanup
2015-09-03 07:26:40 +02:00
Laurent Lalanne
69125e8e9d
LP-44 Save RAM : Use float UAVO type only when needed. 184bytes saved
2015-09-03 07:26:06 +02:00
James Duley
e308039206
LP-99 Decouple flight build
...
Moved flight make code into flight/Makefile. This should speed up
rebuilds for GCS and keeps the top level Makefile tidier.
Change-Id: I9d33cb5c223b6a8ed2821435a5d63ecf4b97c6b8
2015-09-02 19:34:58 +12:00
Alessio Morale
a5482a5c2b
LP-108 - Fix Temp calculation, get rid of floatin point operations within ISR
2015-09-01 23:32:26 +02:00
Stefan Karlsson
71f6e82399
LP-107 Use scaleChannel for unscaled motor outputs
2015-09-01 21:17:52 +02:00
Stefan Karlsson
f7b8a57e42
LP-107 Replace the scaling function in scaleMotors
...
The previous scaling function used in scaleMotor could end up with
output values below the neutral point.
This patch adds a new scaling mode that will try to scale the output
proportionally while still keep all outputs within neutral and max.
The user can select three different modes:
1) NoScaling - Only cap the output values between neutral and max.
2) AddAndSubtract - The previous output scaling method, which moves the
output values directly proportionally to the amount the max/min motor
is out of the limits.
3) ElevateAndCompress - The new mode, which elevates all motor values by
the percentage needed to bring the min motor to neutral, and then
compress all motor values by the percentage needed to bring the max
motor down to max.
The motor scaling mode can be selected by setting the
FlightModeSettings.MotorScalingMode UAVO field.
2015-08-31 21:29:48 +02:00
Alessio Morale
538a137bf6
Merged in f5soh/librepilot/laurent/LP-92_Feed_forward_remove (pull request #33 )
...
Laurent/lp 92_feed_forward_remove
2015-08-21 13:35:10 +02:00
Alessio Morale
43ca4b01af
Merged in rbekken/librepilot/copyright_update (pull request #32 )
...
Update all changed files against GIT log with copyright headers consistency.
2015-08-21 13:34:37 +02:00
Roy Bekken
ad84547637
Update all changed files against GIT log with copyright headers consistency.
2015-08-19 16:15:58 +02:00
Laurent Lalanne
99975bf9b0
LP-92 Reduce Actuator stack size - Increase System stack size for diags
2015-08-14 10:59:53 +02:00
Laurent Lalanne
670dbfe9ce
LP-92 Remove Feed Forward : flight / ground
2015-08-14 10:54:12 +02:00
Alessio Morale
74c69e033c
LP-67 - Fix checkbox yaw recalc checkbox, allow yaw recalc flag changes to trigger a yaw recalc
2015-08-14 10:24:19 +02:00
Alessio Morale
ee461ff303
LP-67 handle full PIDs terms with a single knob for each axis (roll/pitch).
...
The new setting will work this way:
- Input (knob) value is used straight as roll or pitch P term;
- P term is mutliplied by two configurable factors and used as D and I terms;
- (Optionally) Yaw P term is calculated from a mean of roll and pitch P terms multiplied by a configurable factor.
- yaw P term is multiplied by other two configurable factors and used as yaw D and I terms.
2015-08-14 10:24:18 +02:00
alessio morale
3cf8f10126
Merged in thread/LP-69_SRXL_CC_Support (pull request #13 )
...
LP-69 Added SRXL support to CopterControl targets.
2015-07-31 14:40:24 +02:00
alessio morale
05494eebcc
Merged in f5soh/librepilot/laurent/LP-66_FixedWing_Roll_differential (pull request #9 )
...
LP-66 - Add differential Roll mixing to Fixed Wing frames
2015-07-31 14:38:28 +02:00
Alessio Morale
13f02e7d9d
LP-56 - Better txpid option namings, fix tabs-spaces, tooltips. headers, variable namings
2015-07-30 18:23:55 +02:00
m_thread
9ba63ea124
LP-69 Added SRXL support to CopterControl targets.
2015-07-30 15:30:59 +02:00
Laurent Lalanne
31c30d752f
LP-66 Fixed wing : Roll differential mixing on flight side
2015-07-29 06:36:22 +02:00
Alessio Morale
7b3aed3de9
LP-56 - Allows a single txpid instance to handle Roll&Pitch
...
Also populate combos with current txpid values
2015-07-27 22:45:33 +02:00
Alessio Morale
7973ab9d0a
LP-56 - Use separate roll/picth factors and add firmware support
2015-07-25 00:29:41 +02:00
a*morale
a66a725fcb
Merge pull request #38 from skarlsso/skarlsso/LP-37_memory_wasted_in_pvPortMallocGeneric
...
LP-37 Fix alignment bug in in pvPortMallocGeneric
2015-07-19 14:09:06 +02:00
Alessio Morale
6a60910e19
LP-05: fix for toplevel makefile changes
2015-07-19 14:07:48 +02:00
Alessio Morale
18bc25aac6
Merge branch 'amorale/LP05-Readd_CC_rebased' of https://github.com/AlessioMorale/LibrePilot into AlessioMorale-amorale/LP05-Readd_CC_rebased
...
Conflicts:
ground/openpilotgcs/src/plugins/setupwizard/vehicleconfigurationhelper.cpp
2015-07-19 12:59:50 +02:00
Stefan Karlsson
d57e838ab1
LP-37 Fix alignment bug in in pvPortMallocGeneric
...
The allocation size was incremented by 'alignment' bytes when
'xWantedSize' was 'alignment' aligned, but not 'portBYTE_ALIGNMENT'
aligned.
2015-07-17 17:04:18 +02:00
Alessio Morale
711ef272c1
LP-5 - Use a single Task for telemetry when no radio is available
2015-07-16 01:01:02 +02:00
paul Jewell
6b6461c8b4
Replaced OPENPILOT_IS_COOL by TOP_LEVEL_MAKEFILE
2015-07-15 08:06:21 +01:00
a*morale
1ef9fc51d6
LP-5 - exclude AH from outerloop
2015-07-15 00:07:51 +02:00
a*morale
62a585c188
LP-5 - Include missing UAVOs, add removed cc fields into hwsettings
2015-07-15 00:07:50 +02:00
a*morale
dd6c6054e9
Revert "OP-1810 FOC"
...
This reverts commit 92e50c2ead
.
Conflicts:
Makefile
ground/openpilotgcs/src/plugins/config/config.pro
ground/openpilotgcs/src/plugins/config/configgadgetwidget.cpp
ground/openpilotgcs/src/plugins/config/configoutputwidget.cpp
ground/openpilotgcs/src/plugins/setupwizard/pages/escpage.cpp
ground/openpilotgcs/src/plugins/setupwizard/resources/connection-diagrams.svg
ground/openpilotgcs/src/plugins/uavobjectutil/devicedescriptorstruct.h
2015-07-15 00:07:50 +02:00
Alessio Morale
78921235cb
Revert "REVONANO - workaround the issue with usart baud rate rounding changing slightly the Xtal frequency."
...
This reverts commit 1985f19fc0
.
2015-06-06 11:31:02 +02:00
Alessio Morale
c2f3f24df2
Revert "REVONANO - CHange slightly xtal frequency to workaround wrong baud rate calculation"
...
This reverts commit b492b7e10a
.
2015-06-06 11:30:48 +02:00
Alessio Morale
b492b7e10a
REVONANO - CHange slightly xtal frequency to workaround wrong baud rate calculation
2015-06-05 19:02:22 +02:00