Stacey Sheldon
a4ae844f2b
f4 usb: rename otg template to real config file
2012-02-07 02:25:30 -05:00
Stacey Sheldon
58bbe0870d
f4 usb: allow device->host data to be const
...
This allows the application code to pass const
descriptors to the Tx APIs in the STM32 USB
library.
2012-02-07 02:25:30 -05:00
Stacey Sheldon
4b911bb3be
f4 usb: remove unused device class examples
2012-02-07 02:25:30 -05:00
Stacey Sheldon
efbe8bbfdd
f4 usb: convert all line endings to LF-only
...
Line ending changes only. No functional changes.
2012-02-07 02:25:30 -05:00
Stacey Sheldon
6a43d1c7ed
f4 usb: Import pristine STM32F4 USB Library v1.1.0
...
Taken from version STM32F4-Discovery_FW_V1.1.0 of the
library from ST.
2012-02-07 02:25:30 -05:00
Stacey Sheldon
4fafbb13ed
makefile: Add EF (Entire Flash) targets for all boards
...
These new build targets will construct a flash image that
includes both a bootloader as well as a firmware image all
in one. Examples:
make ef_coptercontrol
make ef_revolution
This also adds support for a new target for writing this EF
image to boards that support a DFU interface (only F4-based
boards). This can be done by running:
make dfuutil_install
# Boot board with SBL asserted to activate STM32 DFU ROM
# Attach USB cable
make ef_revolution_dfu
Bootloader images are also now padded out to occupy the full
BL flash region.
2012-02-03 00:59:36 -05:00
James Cotton
18a64e261f
Going a bit overkill with this - deinit who SPI block between transactions.
2012-02-02 12:32:57 -06:00
James Cotton
03cfb1453a
DeInit SPI DMA between transactions. Somehow if this doesn't happen the next
...
transaction doesn't start at the beginning again. Something is still not quite
right because first few bytes aren't getting across. Need logic analyzer.
2012-02-02 11:37:35 -06:00
James Cotton
77a6abb341
For PIOS_SPI F4 do not enable the TX irq. Also do not wait for the
...
transmission to finish either.
2012-02-02 11:24:14 -06:00
James Cotton
0a71a48c57
Sending all FF finally again
2012-02-02 10:36:09 -06:00
James Cotton
29237f97ae
For SPI slave devices we need to handle the interrupt differently since
...
transactions should already be completed. Also reset the callback so in the
case of noise on the IRQ line it will not keep firing interrupts.
I suspect we should probably disable interrupts in this handler to prevent
refiring.
2012-02-02 10:13:09 -06:00
Alessio Morale
820e8ac062
Handle different prescaler values for timers on APB1 and APB2.
...
The PIOS_MASTER_CLOCK has been removed in favor of
PIOS_SYSCLK (the master clock value,168000000 for revolution)
PIOS_PERIPHERAL_APB1_CLOCK and
PIOS_PERIPHERAL_APB2_CLOCK
Look at STM32F4xx_Revolution.h for the list of timer/peripheral and APB them belongs.
2012-01-28 20:04:55 +01:00
James Cotton
fe7b9a909a
LED: Update the LEDs on revo
2012-01-26 09:11:27 -06:00
James Cotton
20670d049b
Update pios_led for F4 targets to match the new F1 implementation. Also fix
...
type for F1 in GPIO labels.
2012-01-25 22:50:19 -06:00
James Cotton
7c22215e0b
Patch from Sambas to fix F4 on windows
2012-01-24 10:33:07 -06:00
James Cotton
aaf1c5dfdd
Update the F1 SPI library to support multiple NSS lines
2012-01-23 23:27:02 -06:00
James Cotton
886d5456ac
Update pios_exti for F4
2012-01-23 16:55:54 -06:00
James Cotton
b2a292e9c4
Move all the drivers to the PiOS/Common directory to prepare for refactoring
...
the EXTI calls they make to the portable version
2012-01-23 10:11:46 -06:00
James Cotton
c84240e485
Merge branch 'next' into revolution3
...
Conflicts:
flight/PiOS/STM32F10x/pios_bmp085.c
flight/PiOS/STM32F10x/pios_exti.c
2012-01-23 06:51:30 -06:00
James Cotton
21ae37b3de
Remove BMP085 driver from F4 target
2012-01-23 06:44:25 -06:00
James Cotton
838370b3a4
Fix calls to backup registers on F4
2012-01-21 13:21:37 -06:00
James Cotton
bb0bfe0ae4
Merge branch 'next' into revolution3
...
Conflicts:
flight/Bootloaders/CopterControl/Makefile
flight/Bootloaders/PipXtreme/Makefile
flight/Bootloaders/Revolution/inc/pios_config.h
flight/CopterControl/Makefile
flight/INS/inc/pios_config.h
flight/Libraries/taskmonitor.c
flight/Modules/Altitude/altitude.c
flight/Modules/Attitude/attitude.c
flight/OpenPilot/Makefile
flight/OpenPilot/Makefile.posix
flight/OpenPilot/System/inc/pios_usb_board_data.h
flight/OpenPilot/System/inc/taskmonitor.h
flight/OpenPilot/System/pios_board.c
flight/OpenPilot/System/taskmonitor.c
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/PiOS/STM32F4xx/pios_bmp085.c
flight/PiOS/STM32F4xx/pios_iap.c
flight/PiOS/pios.h
flight/Revolution/System/inc/pios_config.h
flight/Revolution/System/inc/taskmonitor.h
flight/Revolution/System/taskmonitor.c
ground/openpilotgcs/src/plugins/serialconnection/serialplugin.cpp
shared/uavobjectdefinition/systemalarms.xml
shared/uavobjectdefinition/taskinfo.xml
2012-01-21 11:27:03 -06:00
James Cotton
5dbbfec8a9
Make the BMA180 driver use the appropriate claim method from the ISR. Also
...
slow down this bus to 10 MHz.
2012-01-21 09:57:02 -06:00
James Cotton
ff0bd87f4e
PIOS SPI: Add a second claim bus method for use in ISR. This has no timeout
...
and uses an ISR safe queue claiming method. This avoids deadlocks when ISR
blocks other tasks from freeing the bus.
2012-01-21 09:07:06 -06:00
James Cotton
ec903449cd
Remove line that bypassed the BMA180 startup test
2012-01-21 08:46:32 -06:00
James Cotton
7f284596f2
Attempting to get flash and BMA180 to coexist
2012-01-20 13:33:21 -06:00
James Cotton
1e8811362e
On revolution attach the flash chip to the accel bus now. Also extended the
...
flash chip driver to take in the slave number during initialization so this is
no longer a hardcoded option.
2012-01-20 07:37:47 -06:00
James Cotton
1b5e776dc5
Hardcoded scale for now since it isn't picking up from the cfg structure.
2012-01-17 19:53:20 -06:00
James Cotton
ce2d0fcbb1
L3GD20 data now running through IRQ -> FIFO
2012-01-17 19:36:32 -06:00
James Cotton
35025303cd
Getting data from gyro.
2012-01-17 19:29:38 -06:00
James Cotton
8b42fbeafc
Revert "Fix case in library.mk to stop Brian bitching :)"
...
This reverts commit d39e818ca6
.
2012-01-08 09:27:13 +01:00
James Cotton
d39e818ca6
Fix case in library.mk to stop Brian bitching :)
2012-01-08 09:10:56 +01:00
James Cotton
ebbe1bd497
Some beginning work on the l3gd20 driver
2012-01-08 09:07:07 +01:00
James Cotton
cc47520baa
Checking ID on ST gyro works
2012-01-04 23:23:42 -06:00
James Cotton
0cc18e7dcf
Add files for new L3DG20 sensor
2012-01-04 20:33:54 -06:00
James Cotton
0da6109871
Update the F4 copyright headers to 2012
2012-01-04 19:29:29 -06:00
James Cotton
25dfb5463e
Add option to switch to using the MPU6000 accel instead of BMA180. Disabled by
...
default.
2011-12-29 02:08:13 -06:00
James Cotton
c080080810
Add ability to change the SPI bus runs at
2011-12-29 00:09:53 -06:00
James Cotton
05da41a79b
Get FirmwareIAP object working on revo
2011-12-24 13:15:56 -06:00
James Cotton
569b201b58
Move the bl_helper out of the common directory as it isn't
2011-12-24 13:10:23 -06:00
James Cotton
1af66fc3d2
Get rid of 500 ms delay in startup for the pios_sys so that servos start
...
properly but a delay is still needs to get MPU6000 up right. Fucking POS.
2011-11-27 18:05:20 -06:00
James Cotton
f7f94011ee
Damnit. For higher bus speeds MPU6000 chip must be initialized twice in a row.
...
WTF piece of shit.
2011-11-27 02:35:08 -06:00
James Cotton
f7d13ebd57
Hack to tweak the gyro gain for now although its too far out at the moment so
...
something isn't configured properly. Possibly it is staying in 250 deg/s mode.
Also make sure if the MPU6000 fifo backs up to pull extra data.
2011-11-27 01:22:37 -06:00
James Cotton
8bbc767a4e
Get the pressure sensor working and reading into Revolution
2011-11-27 00:52:09 -06:00
James Cotton
13729f854e
PiOS F4: Fix PWM timer interrupts and enable PWM input
2011-11-26 22:41:41 -06:00
James Cotton
21367d3a22
Spektrum support for Revolution
2011-11-26 22:19:42 -06:00
James Cotton
e24c905ff7
F4 PiOS: Reimplement the RTC logic for F4
2011-11-26 22:13:57 -06:00
James Cotton
11ad135b27
Some changes to MPU6000 driver to make it start more reliably on fresh powerup
2011-11-26 14:12:12 -06:00
James Cotton
c57acf6459
F4 PiOS: Must use a different remap command on F4 for timer module to command
...
pin. Include the remap source in the config structure now.
2011-11-26 03:35:26 -06:00
James Cotton
de9a8453ef
Configure the board to use PWM input and servo output
2011-11-26 02:19:56 -06:00
James Cotton
da75e9fdaf
PiOS: Make I2C return an error code for NACK
2011-11-19 00:11:16 -06:00
James Cotton
a7ef5601e0
Update the MPU6000 FIFO code and also fix the temperature code
2011-11-18 00:24:55 -06:00
James Cotton
6d74e96c31
Got attitude working again. MPU6000 FIFO reading needs a bit of work.
2011-11-18 00:00:55 -06:00
James Cotton
79730d5afa
Try and get the MPU6000 buffer to run down. Staying high for some reason.
2011-11-17 11:23:31 -06:00
James Cotton
0efffef1fa
Work on bringing the Revolution board up
2011-11-17 10:13:34 -06:00
James Cotton
d97e5dbc59
Add SPI MPU6000 driver. Unfortunate hack in HMC5883 EXTI handler to call
...
MPU6000. Need to generalize EXTI ASAP.
2011-11-17 10:12:10 -06:00
James Cotton
1deb799b6f
Get simple attitude estimation working on F4 INS. Also make MPU6050 return
...
scaling that casts to degrees.
2011-11-16 11:36:04 -06:00
James Cotton
aeb42332d6
Get the MPU6050 fifo running and read by the attitude module
2011-11-14 11:23:14 -06:00
James Cotton
1086df5b21
Correctly configure MPU6050 interrupt. However currently not pushing data to
...
the buffer as that seems to fail.
2011-11-14 11:11:40 -06:00
James Cotton
da679441ec
Duplicate the spektrum (dsm) driver to F4 branch
2011-11-14 10:12:51 -06:00
James Cotton
180d84e373
Update the MPU6050 code a bit more to use the right registers.
2011-11-14 10:09:49 -06:00
James Cotton
2eb89e9b81
No reason for the data read flag in pios_bmp085.c to be a semaphore
2011-11-14 10:07:19 -06:00
James Cotton
96a098bf74
Add code for MPU6050 driver
2011-11-13 19:44:56 -06:00
James Cotton
938a577d11
Small change to pios_adc so it works when not enabled
2011-11-13 17:14:08 -06:00
James Cotton
ec84fc4058
Get the Revolution bootloader working
2011-11-13 17:13:42 -06:00
James Cotton
c0f16d2f44
Revolution: Configure clocks correctly
2011-11-03 20:12:34 -05:00
James Cotton
0ce80e02f5
Compiles now
2011-11-02 02:51:20 -05:00
James Cotton
0931a518d4
Bring F4 PiOS up to date with some of our timer conventions
2011-11-01 04:39:51 -05:00
James Cotton
4d6f810984
Make ADC driver play properly when not included
2011-11-01 03:22:48 -05:00
James Cotton
9607da9c62
Add some drivers to the device specific library for now until the exti problems
...
are fixed
2011-11-01 03:19:58 -05:00
James Cotton
2cc0b301ce
Make some of the StdPeriph function calls const where appropriate
2011-11-01 03:18:59 -05:00
James Cotton
3388843fb5
Merge in PixHawk F4 work
2011-11-01 01:09:55 -05:00