rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-10 18:24:11 +01:00
Code Issues Releases Activity
6,744 Commits 5 Branches 8 Tags 266 MiB
35509ee977
Commit Graph

697 Commits

Author SHA1 Message Date
Corvus Corax
35509ee977 moved sanitycheck from system to manualcontrol to not break OSD and PipX 
targets

Conflicts:

	flight/Modules/ManualControl/manualcontrol.c
 2012-11-22 10:11:18 +01:00
Corvus Corax
5862346d40 Merge remote-tracking branch 'baseorigin/corvuscorax/simposix_firmwareiap' into corvuscorax/sanity_additions 2012-11-11 18:06:16 +01:00
Corvus Corax
ec5f9d232f Revert "do not do configuration check on SimPosix architecture, its not ported yet" 
This reverts commit 112a3fe7e5.
 2012-11-11 18:05:46 +01:00
Corvus Corax
112a3fe7e5 do not do configuration check on SimPosix architecture, its not ported yet 2012-11-11 17:39:37 +01:00
Corvus Corax
d1447ca3f8 Rise Botfault error whenever hwsettings has been changed but no reboot took place yet 2012-11-11 17:23:07 +01:00
James Cotton
a5c743d738 Sanity Check: Cannot connect callback to TaskInfo now it isn't always used. 2012-10-27 14:00:57 -05:00
James Cotton
8864b545ae Revert "Sanity Checking: Regardless of DIAG_TASK always populate TaskInfo.Running" 
This reverts commit 0b6fa7fe6f.
 2012-10-27 13:43:59 -05:00
James Cotton
32bf63c436 Sanity Check: Perform the initial check then attach the callbacks to avoid 
a case where two threads do the same thing.
 2012-10-25 22:51:14 -05:00
James Cotton
b28cdba46d SanityCheck: Trigger sanity check code on callbacks from the appropriate settings. 
The only downside is that it needs to update on the TaskInfo object which means
since htat updates periodically this code runs more often that really needed since
the modules only start at first.  However, leaving that connection out means it
misses the initial set of modules.
 2012-10-25 21:49:53 -05:00
James Cotton
b9ebeb2c2e Sanity Check: For now force the sanity check to run once a second and always set an error 2012-10-25 12:43:56 -05:00
James Cotton
0b6fa7fe6f Sanity Checking: Regardless of DIAG_TASK always populate TaskInfo.Running 
so we can verify certain modules are running.
 2012-10-25 10:01:24 -05:00
Kenz Dale
1ab1ea5899 Save ~150 bytes by moving GPSDataProtocol to SystemSettings. 
All credit to Anstron.
 2012-10-22 16:47:22 +02:00
Corvus Corax
898292fcdb added (fake) firmware version information to simposix 2012-10-20 15:22:54 +02:00
Stacey Sheldon
75170177df console: example usage of the debug console 2012-10-11 00:22:07 -04:00
Laura Sebesta
8997df2438 Merge branch 'next' into kenz/diag_stack_split 
Conflicts:
	flight/Modules/Stabilization/stabilization.c
 2012-09-27 19:29:23 +02:00
James Cotton
4717c376c0 Stabilization: For the inner loop call the setpoint shaping version so that 
the derivative term can weight the sticks and gyros independently.
 2012-09-11 13:21:53 -05:00
James Cotton
11b099b1ef Stabilization: Add configuration terms for the derivative calculation to the UAVO and pass 
them in to the PID system.
 2012-09-11 12:29:38 -05:00
James Cotton
9763a70364 Merge remote-tracking branch 'origin/igor/pidt1' into relay_tuning 
Conflicts:
	flight/Modules/Stabilization/stabilization.c
 2012-09-10 03:10:26 -05:00
Igor Van Airde
8ca99739ed Changed rate controller from PID to PIDT1 to improve flight stability. 
Low pass on D-Term makes the D-Term usable to improve flight stability.
Affects rate and stabilize mode.
 2012-09-09 13:07:25 +02:00
Werner Backes
4803dfe99c Fix: yaw bias correction wasn't applied on CC3D. 2012-09-06 13:13:58 +02:00
James Cotton
2f65fc1e8e Merge branch 'next' into relay_tuning 
Conflicts:
	shared/uavobjectdefinition/manualcontrolsettings.xml
	shared/uavobjectdefinition/taskinfo.xml
 2012-09-04 10:43:04 -05:00
James Cotton
59d1367d37 Autotuning: Make the output also follow the hysteresis output 2012-08-24 22:45:45 -05:00
James Cotton
a3f1894cd7 Autotuning: Make the estimator require the value to toggle above and below the hysteresis level. 2012-08-24 21:33:08 -05:00
James Cotton
8babe5d8a4 Autotuning: Increase the measurement time to 30 seconds. 2012-08-24 21:32:11 -05:00
Laura Sebesta
f2ffd1fb99 Changed DIAGNOSTICS flag to be individual to each module instead of global. 
The upshot is the stack usage monitor can be turned on at a lower RAM threshold.
 2012-08-24 12:04:05 +02:00
Stacey Sheldon
29ab1d8cf3 actuator: factor out settings updates from main loop 2012-08-11 19:46:00 -04:00
Stacey Sheldon
b505602c15 Merge remote-tracking branch 'origin/stac/rc-tx-joystick-emulation' into next 2012-08-11 11:21:18 -04:00
Stacey Sheldon
49c153003c hid joystick: use linearly scaled channels 
Scales each channel only based on max and min calibrated values.
The neutral value is now ignored so the joystick sees a linear
range between min and max.

This is particularly useful to allow the full range of values for
throttle to be passed through to the joystick.
 2012-08-10 23:36:06 -04:00
James Cotton
06a6e367b0 Merge remote-tracking branch 'origin/hyper/OP-661' into next 2012-08-08 13:49:48 -05:00
Stacey Sheldon
ef0c12b1b6 hid joystick: emulate a USB HID joystick using RC Transmitter 
Adds a new RCTransmitter setting for the USB HID interface which
emulates a USB HID joystick.  The scaled RC receiver channels
from any RCVR protocol are passed through to the various emulated
joystick controls.

The main use for this feature is to allow you to use your own RC
transmitter with any RC simulator on a PC.

This is known to work with CRRCsim but should work with any simulator
that supports joystick input.
 2012-08-05 21:45:27 -04:00
James Cotton
9f3c8dddd3 Add a version of the sin lookup table that is in ram instead of flash 2012-08-03 12:15:57 -05:00
James Cotton
490955dbea Use cos_lookup instead of sin_looup(x+90) 2012-08-03 11:34:05 -05:00
James Cotton
fc2f8376bc Prevent an alarm from ManualControlCommand when using autotuning mode. 2012-08-03 09:37:47 -05:00
James Cotton
50c7641162 Move the PID methods into a standalone library 2012-08-03 09:37:46 -05:00
James Cotton
2723ff4be3 Factor the virtual flybar code out of the stabilization module 2012-08-03 09:37:46 -05:00
James Cotton
aae0e562c6 Create a sine lookup table that is cached in flash and make relay tuning start 
ot use this.
 2012-08-03 09:37:46 -05:00
James Cotton
924c91ce1e Fix mistake from previous merge with duplicate the STABILIZATIONOMDE_ATTITUDE 
case
 2012-08-03 09:37:46 -05:00
James Cotton
8565dfbcc3 Factor the relay tuning out of the main stabilization.c file into it's own 
tool.
 2012-08-03 09:37:46 -05:00
James Cotton
ee4bb84e36 Fix: Increase teh memory for autotune back to 1024 which leaves 100 free. 2012-08-03 09:37:46 -05:00
James Cotton
561cf994b0 Reduce the memory footprint of the sin lookup table by using sin(x+pi) = 
-sin(x).  Still just needs to move into flash and have some options about
precision when in its own library function.
 2012-08-03 09:37:46 -05:00
James Cotton
652647fc87 Make autotuning module optional 2012-08-03 09:37:46 -05:00
James Cotton
d0ef95ff9a Fix idiotic bug in the stab_refactor 2012-08-03 09:37:46 -05:00
James Cotton
2ccd6605a4 Now the stabilization refactor is in we can make swapping between tuning the 
system in rate or attitude mode software configurable.
 2012-08-03 09:37:45 -05:00
James Cotton
24d9e50c08 Based on the selected behavior either apply or save the stabilization settings 2012-08-03 09:37:45 -05:00
James Cotton
7ea14ecc22 Track the output gain instead of amplitude so the measured values are 
consistent if the settings are changed afterwards.
 2012-08-03 09:37:45 -05:00
James Cotton
17878b32f3 Make autotune run within an attitude loop instead of direct rate mode. Easier 
for beginners.
 2012-08-03 09:37:44 -05:00
James Cotton
a9af53b4f3 Create new autotuning module which rotates through the axes for autotuning and 
then computes new stabilization settings.
 2012-08-03 09:37:44 -05:00
James Cotton
44e72d0a70 A big refactoring of stabilization.c to get rid of the two separate loops and 
move them into one big structure.  This makes it easier to implement other
modes.
 2012-08-03 09:37:44 -05:00
James Cotton
e01c5d5f87 Get online estimation of period and amplitude working 2012-08-03 09:37:44 -05:00
James Cotton
4ac8df6aa8 Make the system perform an online estimate of the period and amplitude of the 
oscillation during relay tuning
 2012-08-03 09:37:44 -05:00