James Cotton
f3327e3993
RM: Enabled optional modules and got the battery module working again.
...
Changed the hardcoded (ick) battery lines for RM. Also removed the reference
to PIOS_ADC_GetPin(4) as that pin is no longer available. Finally
changed the default FlightBatterySettings to work out of the box
for the standard recommended sensors.
2012-09-01 11:03:32 -05:00
James Cotton
300cee44b4
RM SBUS: There is no pull down on the inverter direction so when not SBUS must explicitly set to off.
2012-08-31 11:01:34 -05:00
James Cotton
b888a137f0
TOFIX: Temporarily remove the transaction lock from the settings as it was causing a deadlock with the radio coms.
2012-08-26 05:02:14 -05:00
James Cotton
042055b29a
RFM22b: Call the pendingISR routine from all the user space tasks. Got a valid connection with this.
2012-08-26 04:18:17 -05:00
James Cotton
f7cda1c0c4
RFM22b: No need to initialize the SPI. Done already.
2012-08-26 02:42:18 -05:00
James Cotton
477385ca25
RFM22b: Start to move the ISR into userspace
2012-08-26 02:41:19 -05:00
James Cotton
b1bd6d8583
PIOS_RFM22b: No need to set the SPI clock speed in the RFM22b module - it can be set by the driver configuration.
2012-08-26 00:00:39 -05:00
James Cotton
84d327c46a
RFM22b: Claim the bus semaphore before reading and writing.
2012-08-25 23:17:52 -05:00
James Cotton
2bb4f860e1
Shuffle around the PACKET_HANDLER definition so we can more easily disable the Radio module.
2012-08-25 22:58:11 -05:00
James Cotton
b95a78cde5
Roll back changes on the revo target
2012-08-25 17:33:14 -05:00
James Cotton
76bdb190d8
Link in the rfm module to the target
2012-08-25 17:27:17 -05:00
James Cotton
982750a58f
Merge remote-tracking branch 'revo/brian/revo_link' into revo-mini
...
Conflicts:
ground/openpilotgcs/src/plugins/plugins.pro
2012-08-25 15:05:47 -05:00
James Cotton
5c34412200
Merge remote-tracking branch 'revo/amorale/revolution_baro_fixes' into revo-mini
2012-08-25 14:55:10 -05:00
Brian Webb
415b86879c
Added the RFM22B driver to the Revo to support an RFM22B radio on the external SPI port.
2012-08-25 11:45:43 -07:00
Brian Webb
fad32dcc29
Split out the PipX radio interface from RadioComBridge module to a separate Radio module. Now the RadioComBridge module just routes messages between the com ports and handles sending/receiving the PipX UAVOs.
2012-08-25 11:41:32 -07:00
James Cotton
b9050809cc
Add a board info file for revo mini. However it was to remap the define MAINADAPTER for the HMC5883 driver which needs rewriting not to need this.
2012-08-25 12:57:50 -05:00
a*morale
789746151a
Fixes the selection of the oversample settings from the pios_ms5611_cfg.oversapling configuration
2012-08-25 11:29:01 +02:00
James Cotton
44dc01126e
Merge branch 'next' into revo
2012-08-12 16:12:54 -05:00
Stacey Sheldon
49c153003c
hid joystick: use linearly scaled channels
...
Scales each channel only based on max and min calibrated values.
The neutral value is now ignored so the joystick sees a linear
range between min and max.
This is particularly useful to allow the full range of values for
throttle to be passed through to the joystick.
2012-08-10 23:36:06 -04:00
Stacey Sheldon
07fde38887
hid joystick: factor out min/max range from report items
2012-08-10 23:29:34 -04:00
Stacey Sheldon
5902c19cc3
hid joystick: compress local usages since they're all in the same page
2012-08-08 10:38:43 -04:00
Stacey Sheldon
030d9e84f9
hid joystick: remove unnecessary usage page definitions
2012-08-08 10:15:08 -04:00
Stacey Sheldon
449c7aab7a
hid joystick: use 32-bits to represent max range
2012-08-08 00:50:03 -04:00
Stacey Sheldon
94f6344fc5
hid joystick: restructure joystick HID report to work on windows
2012-08-07 21:34:25 -04:00
Stacey Sheldon
017d8c79c9
hid joystick: add missing .c file
...
This time for sure...
2012-08-06 11:49:03 -04:00
Stacey Sheldon
d44e24a150
hid joystick: add missing .h files
2012-08-06 11:42:44 -04:00
Stacey Sheldon
ef0c12b1b6
hid joystick: emulate a USB HID joystick using RC Transmitter
...
Adds a new RCTransmitter setting for the USB HID interface which
emulates a USB HID joystick. The scaled RC receiver channels
from any RCVR protocol are passed through to the various emulated
joystick controls.
The main use for this feature is to allow you to use your own RC
transmitter with any RC simulator on a PC.
This is known to work with CRRCsim but should work with any simulator
that supports joystick input.
2012-08-05 21:45:27 -04:00
James Cotton
f02aacfeb6
Change the constant so LED flashing works properly on Revo
2012-07-28 11:22:24 -05:00
James Cotton
735c009843
Disable writing to the overo driver for every pios_com write again. It drives
...
up system consumption too much, although now data will get lost :(.
2012-07-25 13:15:47 -05:00
James Cotton
30085d23ff
Reenable sending from the overo tx method but no longer yield since we aren't
...
using a blocking write anyway.
2012-07-24 11:29:24 -05:00
James Cotton
a90dd1ef5c
For now do not call PIOS_OVERO_WriteData from the Tx method because this is too
...
slow (task yield?) and results in a lot of event system errors.
2012-07-24 11:18:58 -05:00
James Cotton
26f07c21f6
Fix the pios_overo driver for compiling against the bootloader
2012-07-23 10:07:42 -05:00
James Cotton
c5904b4667
Clean up the pios_overo driver. Working well now.
2012-07-20 13:57:47 -05:00
James Cotton
bcdd5a8bba
Fixes to the overo module where it was thinking the fifo buffer writes failed
2012-07-20 13:45:31 -05:00
James Cotton
5091b16065
Needs work but it's sending data now
2012-07-20 11:36:49 -05:00
James Cotton
337f0e8bfa
Properly enable circular buffering on the overo spi
2012-07-20 10:59:18 -05:00
James Cotton
6a3c067c18
Zero out the packet counter when pios_over is initialized.
2012-07-20 10:45:20 -05:00
James Cotton
fb215fd095
PiOS overo driver wasn't setting it's id and also clearing the DMA IRQ flags
2012-07-20 10:17:57 -05:00
James Cotton
6b3e5573a0
The overosync module now uses pios_com interface.
2012-07-20 09:46:28 -05:00
James Cotton
8fc2d10ea6
Get the pios_overo driver for pios_com compiling
2012-07-20 09:32:22 -05:00
James Cotton
1c4c373b86
Begin rewriting pios_overo to look like a standard com layer
2012-07-20 03:42:09 -05:00
James Cotton
7492d34d25
Merge branch 'overo_control' into revo
2012-07-19 08:35:39 -05:00
James Cotton
5ebd368b18
Merge branch 'next' into revo
...
Conflicts:
flight/PiOS/STM32F10x/link_STM32103CB_PIPXTREME_sections.ld
2012-07-19 08:35:30 -05:00
James Cotton
2f64124da8
Updates to the pios_overo driver to fully reinit the dma and spi device between
...
packets
2012-07-17 17:21:28 -05:00
James Cotton
db27653859
Make the Overo module use the new driver
2012-07-17 16:11:23 -05:00
James Cotton
a6ba379af9
PIOS_OVERO driver which handles the communications to the overo and ensures the
...
data stays in frame.
2012-07-17 15:34:54 -05:00
James Cotton
92a0311b32
New pios_overo driver that handles the SPI communications to the overo
2012-07-17 13:31:00 -05:00
James Cotton
719772c98a
Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into next
2012-07-16 11:42:29 -05:00
James Cotton
6b101d71af
Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into revo
2012-07-15 12:32:35 -05:00
James Cotton
ce6bebceb6
Also strex needs to not clobber it's register to have predictable results.
...
OPReview-227
2012-07-14 19:47:03 -05:00
