It is now possible to have 1 to 6 flight mode switch positions
(usefull for guidance, position hold and similar use).
The input channel range is divided into N (1 to 6) zones and each
zone represents a flight mode. Default is 3 zones (backward compatible),
but more can be chosen.
How to use: configure Tx mixers in a way they provide required number
of different values for the same FlightMode channel. For instance,
using Turnigy 9X radio with ER9X firmware, one can create a mixer like
this:
-100 MAX ID0 Manual
R -50 MAX ID1 Stabilized1 (Rate)
R 0 MAX ID2 Stabilized2 (Attitude)
R 50 MAX RUD PositionHold
R 100 MAX ELE ReturnToBase
And set number of flight mode positions to 5. As a result, the 3-pos
switch (ID0, ID1, ID2) will provide first three flight modes, the rudder
D/R switch will override those and enable the 4th flight mode, and
elevator D/R switch will have highest precedence and activate the 5th
flight mode.
This will change the ManualControlSettings objectID.
1) Combining all binary or mode values into a single byte
2) Adding accessor functions to read/write the flag bits
3) Reduced the size of the time values from 32 bits to 16 bits
Should not use known field order to get UAVO field. This breaks
a widget after adding any float field to the object since after
sorting this field will have index 0 and shift other fields.
This fix should have some runtime checks to make sure the field
was really found, but it should be fixed through the whole GCS
code in a separate cleanup.
neutral position into a slider. During calibration the slider moves and the
min and max values are updated appropriately. Also make the collective channel
skippable in the configuration wizard.
Created "simple wizard" button witch bypasses the sticks identification screen.
Small bugfix to fix GCS crashing if trying to upload a firmware bigger then the HW capacity.
Spelling mistakes
Show inverted movement as soon as checkbox is checked.
Bring back flightmode change messagebox.
Layout issues (this was not a issue on win so not sure its fixed).
Support for flightmode binary switches neutral=min+(max-min)/2.
Flightmode slider not changing according to command.
Mode 1 roll on the right (still think it doesn't make sense :) )
This reverts commit 0ba605812e.
The real problem was not with this, but due to unexpected reverse
checkbox behaviour.
Reverse checkboxes are completely ignored at the start of calibration,
they can be even set checked initially. But change of checkbox does not
reverse the GCS control gadget display. This should probably be fixed.
