| .. |
|
accelgyrosettings.xml
|
OP-1149: all gyro have second order temp bias polynomials. remove unneeded copies of AccelGyroSettings values
|
2014-02-06 00:52:44 +01:00 |
|
accelsensor.xml
|
some fixes and corrections as suggested in review
|
2013-05-29 22:18:08 +02:00 |
|
accelstate.xml
|
some fixes and corrections as suggested in review
|
2013-05-29 22:18:08 +02:00 |
|
accessorydesired.xml
|
Categorizing all UAVObjects into 5 main categories:
|
2013-06-22 19:58:54 +02:00 |
|
actuatorcommand.xml
|
Categorizing all UAVObjects into 5 main categories:
|
2013-06-22 19:58:54 +02:00 |
|
actuatordesired.xml
|
OP-1197 configurable failsafes OP-1219 thrust control OP-1217 separate manualcontrolsettings apart
|
2014-02-09 19:37:22 +01:00 |
|
actuatorsettings.xml
|
OP-1216 moved safety zeroing for channels from Stabilization to Actuators (so it also affects manual mode)
|
2014-03-02 15:35:39 +01:00 |
|
airspeedsensor.xml
|
OP-1273 Adaptations to include MS4525DO PixHawk speed sensor
|
2014-03-25 09:18:25 +01:00 |
|
airspeedsettings.xml
|
OP-1326 Change default airspeed sensor to "None"
|
2014-05-07 22:47:50 +02:00 |
|
airspeedstate.xml
|
set all uavobjects logging mode to manual
|
2013-11-17 20:45:04 +01:00 |
|
altitudefiltersettings.xml
|
OP-1235 make Initialization Acceldrift KI configurable
|
2014-04-14 10:58:46 +02:00 |
|
altitudeholdsettings.xml
|
OP-1197 configurable failsafes OP-1219 thrust control OP-1217 separate manualcontrolsettings apart
|
2014-02-09 19:37:22 +01:00 |
|
altitudeholdstatus.xml
|
simplified altitude hold control loop
|
2013-12-27 18:37:27 +01:00 |
|
attitudesettings.xml
|
OP-1375 Update Mag Ki and Kp default settings
|
2014-06-29 16:06:54 +02:00 |
|
attitudesimulated.xml
|
Categorizing all UAVObjects into 5 main categories:
|
2013-06-22 19:58:54 +02:00 |
|
attitudestate.xml
|
some fixes and corrections as suggested in review
|
2013-05-29 22:18:08 +02:00 |
|
barosensor.xml
|
some fixes and corrections as suggested in review
|
2013-05-29 22:18:08 +02:00 |
|
callbackinfo.xml
|
OP-1309 inner stabilization loop in new incarnation - is not used yet until outer loop rewritten as well
|
2014-04-26 22:37:49 +02:00 |
|
cameradesired.xml
|
Categorizing all UAVObjects into 5 main categories:
|
2013-06-22 19:58:54 +02:00 |
|
camerastabsettings.xml
|
Categorizing all UAVObjects into 5 main categories:
|
2013-06-22 19:58:54 +02:00 |
|
debuglogcontrol.xml
|
added some in uavobject definition comments
|
2013-11-19 18:55:38 +01:00 |
|
debuglogentry.xml
|
Logging facility: logs debug data to logfs and exports it through container UAVObject
|
2013-11-17 02:54:26 +01:00 |
|
debuglogsettings.xml
|
Added new setting 'OnlyWhenArmed' to debuglogsettings
|
2013-11-19 19:29:24 +01:00 |
|
debuglogstatus.xml
|
added some in uavobject definition comments
|
2013-11-19 18:55:38 +01:00 |
|
ekfconfiguration.xml
|
OP-1412 change initial gyro bias uncertainty variance setting
|
2014-07-22 23:38:50 +02:00 |
|
ekfstatevariance.xml
|
Categorizing all UAVObjects into 5 main categories:
|
2013-06-22 19:58:54 +02:00 |
|
faultsettings.xml
|
Categorizing all UAVObjects into 5 main categories:
|
2013-06-22 19:58:54 +02:00 |
|
firmwareiapobj.xml
|
Merge branch 'amorale/OP-974_make_bl_info_available_to_fw' into next
|
2014-03-09 16:17:34 +01:00 |
|
fixedwingpathfollowersettings.xml
|
OP-1352 redesigned course calculation to take complete wind vector into account
|
2014-05-17 22:02:04 +02:00 |
|
fixedwingpathfollowerstatus.xml
|
OP-1036: rename some settings and move them in the right place
|
2013-07-10 15:55:12 +02:00 |
|
flightbatterysettings.xml
|
OP-1299 Added autodetect battery cell number before arming. Tested for LiPo from 2S to 6S. Over 6S counting is not possible for LiPo. Should work for LiCo too. LiFePo works only for 1S or 2S. I was not able to find values for LiFeSO4. FlightBatteryState has now two new fields: NbCells and NbCellsAutodetected, which register the autodetection. FlightBatteryState.NbCells should be used instead of FlightBatterySettings.NbCells now, when the number of cells in needed. FlightBatterySettings.NbCells is used by the user to prescribe a cell number or if equal to zero to ask for autodetection.
|
2014-04-10 17:28:48 +02:00 |
|
flightbatterystate.xml
|
OP-1299 Added autodetect battery cell number before arming. Tested for LiPo from 2S to 6S. Over 6S counting is not possible for LiPo. Should work for LiCo too. LiFePo works only for 1S or 2S. I was not able to find values for LiFeSO4. FlightBatteryState has now two new fields: NbCells and NbCellsAutodetected, which register the autodetection. FlightBatteryState.NbCells should be used instead of FlightBatterySettings.NbCells now, when the number of cells in needed. FlightBatterySettings.NbCells is used by the user to prescribe a cell number or if equal to zero to ask for autodetection.
|
2014-04-10 17:28:48 +02:00 |
|
flightmodesettings.xml
|
OP-1413 - Land flight mode is actually not a finished auto landing system but rather a PH hack, thus it needs to be disabled from gcs until it is will be implemented properly.
|
2014-07-20 11:02:43 +02:00 |
|
flightplancontrol.xml
|
Categorizing all UAVObjects into 5 main categories:
|
2013-06-22 19:58:54 +02:00 |
|
flightplansettings.xml
|
Categorizing all UAVObjects into 5 main categories:
|
2013-06-22 19:58:54 +02:00 |
|
flightplanstatus.xml
|
Categorizing all UAVObjects into 5 main categories:
|
2013-06-22 19:58:54 +02:00 |
|
flightstatus.xml
|
OP-1287 added new pos vario flightmodes
|
2014-06-04 09:57:37 +02:00 |
|
flighttelemetrystats.xml
|
OP-1212 prioritize FlightTelemetryStats, GCSTelemetryStats, OplinkStatus.
|
2014-02-07 18:28:39 +01:00 |
|
gcsreceiver.xml
|
Categorizing all UAVObjects into 5 main categories:
|
2013-06-22 19:58:54 +02:00 |
|
gcstelemetrystats.xml
|
OP-1212 prioritize FlightTelemetryStats, GCSTelemetryStats, OplinkStatus.
|
2014-02-07 18:28:39 +01:00 |
|
gpspositionsensor.xml
|
set all uavobjects logging mode to manual
|
2013-11-17 20:45:04 +01:00 |
|
gpssatellites.xml
|
set all uavobjects logging mode to manual
|
2013-11-17 20:45:04 +01:00 |
|
gpssettings.xml
|
added missing file
|
2013-06-30 20:04:32 +02:00 |
|
gpstime.xml
|
set all uavobjects logging mode to manual
|
2013-11-17 20:45:04 +01:00 |
|
gpsvelocitysensor.xml
|
set all uavobjects logging mode to manual
|
2013-11-17 20:45:04 +01:00 |
|
groundtruth.xml
|
OP-1070 GrountTruth object sent to FC.
|
2013-08-14 17:01:54 -07:00 |
|
gyrosensor.xml
|
Enabled simulated sensors in SimPosix for debugging of EKF behaviour including:
|
2013-06-05 19:34:48 +02:00 |
|
gyrostate.xml
|
some fixes and corrections as suggested in review
|
2013-05-29 22:18:08 +02:00 |
|
homelocation.xml
|
Categorizing all UAVObjects into 5 main categories:
|
2013-06-22 19:58:54 +02:00 |
|
hwsettings.xml
|
OP-1312 Make WS2811 driver configurable.
|
2014-04-26 19:48:44 +02:00 |
|
i2cstats.xml
|
set all uavobjects logging mode to manual
|
2013-11-17 20:45:04 +01:00 |
|
magsensor.xml
|
some fixes and corrections as suggested in review
|
2013-05-29 22:18:08 +02:00 |
|
magstate.xml
|
some fixes and corrections as suggested in review
|
2013-05-29 22:18:08 +02:00 |
|
manualcontrolcommand.xml
|
OP-1197 configurable failsafes OP-1219 thrust control OP-1217 separate manualcontrolsettings apart
|
2014-02-09 19:37:22 +01:00 |
|
manualcontrolsettings.xml
|
OP-1217 create new receiver module
|
2014-02-16 15:09:08 +01:00 |
|
mixersettings.xml
|
OP-1216 added new mixer output type "reversable motor" to have engines which can can backwards go to a safe level when disarmed
|
2014-03-09 01:37:22 +01:00 |
|
mixerstatus.xml
|
set all uavobjects logging mode to manual
|
2013-11-17 20:45:04 +01:00 |
|
mpu6000settings.xml
|
OP-848 Added a note for the user on uavo tooltip to remember that it need board reboot for the setting to takes effect
|
2013-02-17 12:32:44 +01:00 |
|
nedaccel.xml
|
Categorizing all UAVObjects into 5 main categories:
|
2013-06-22 19:58:54 +02:00 |
|
objectpersistence.xml
|
Add a proper description for ObjectPersistence
|
2014-02-07 18:37:56 +01:00 |
|
oplinkreceiver.xml
|
OP-1122 OP-1120 OPLinkReceiver uavobject had no caterogy defined (is now part of the System category)
|
2014-01-09 21:48:27 +01:00 |
|
oplinksettings.xml
|
Merge remote-tracking branch 'origin/master' into next
|
2013-07-06 07:08:30 -07:00 |
|
oplinkstatus.xml
|
OP-1212 prioritize FlightTelemetryStats, GCSTelemetryStats, OplinkStatus.
|
2014-02-07 18:28:39 +01:00 |
|
osdsettings.xml
|
Categorizing all UAVObjects into 5 main categories:
|
2013-06-22 19:58:54 +02:00 |
|
overosyncsettings.xml
|
set all uavobjects logging mode to manual
|
2013-11-17 20:45:04 +01:00 |
|
overosyncstats.xml
|
set all uavobjects logging mode to manual
|
2013-11-17 20:45:04 +01:00 |
|
pathaction.xml
|
Merge remote-tracking branch 'origin/next' into filnet/OP-1122_gcs_waypoint_editor_stabilization
|
2013-12-08 14:58:01 +01:00 |
|
pathdesired.xml
|
OP-1287 fixed telemetry options for pathdesired , which were set way too aggressive
|
2014-06-09 23:39:05 +02:00 |
|
pathplan.xml
|
OP-1122 OP-1158 - renamed uavobject FlightPlan to PathPlan
|
2014-01-14 21:05:16 +01:00 |
|
pathstatus.xml
|
set all uavobjects logging mode to manual
|
2013-11-17 20:45:04 +01:00 |
|
perfcounter.xml
|
OP-1365 Flight code instrumentation API: define ID unit as hex for perfcounter uavo
|
2014-06-06 22:40:22 +02:00 |
|
poilearnsettings.xml
|
Categorizing all UAVObjects into 5 main categories:
|
2013-06-22 19:58:54 +02:00 |
|
poilocation.xml
|
set all uavobjects logging mode to manual
|
2013-11-17 20:45:04 +01:00 |
|
positionstate.xml
|
set all uavobjects logging mode to manual
|
2013-11-17 20:45:04 +01:00 |
|
radiocombridgestats.xml
|
OP-1122 OP-1145 fixed handling of ground messages done by OPLM
|
2014-01-06 21:35:00 +01:00 |
|
ratedesired.xml
|
OP-1309 some small fixes to Stabilization as result of simulator testing
|
2014-04-29 15:51:56 +02:00 |
|
receiveractivity.xml
|
Categorizing all UAVObjects into 5 main categories:
|
2013-06-22 19:58:54 +02:00 |
|
relaytuning.xml
|
Categorizing all UAVObjects into 5 main categories:
|
2013-06-22 19:58:54 +02:00 |
|
relaytuningsettings.xml
|
Categorizing all UAVObjects into 5 main categories:
|
2013-06-22 19:58:54 +02:00 |
|
revocalibration.xml
|
OP-975/OP-1068 replace simple scaling with a calibration matrix for magnetometer correction
|
2014-04-08 21:22:09 +02:00 |
|
revosettings.xml
|
OP-1161 changed default maximum warning and critical deviations for magnetometer
|
2014-05-08 00:20:00 +02:00 |
|
sonaraltitude.xml
|
Categorizing all UAVObjects into 5 main categories:
|
2013-06-22 19:58:54 +02:00 |
|
stabilizationbank.xml
|
OP-984 cleaned up stabilization bank object
|
2013-12-11 17:08:14 +00:00 |
|
stabilizationdesired.xml
|
OP-1287 renamed VELOCITYCONTROL back to AltitudeVario for consistency
|
2014-06-03 18:42:54 +02:00 |
|
stabilizationsettings.xml
|
Merge branch 'corvuscorax/OP-1309_Stabilization-Refactoring' into corvuscorax/OP-1259_Cruise_Control_Tweaks
|
2014-05-02 18:25:57 +02:00 |
|
stabilizationsettingsbank1.xml
|
OP-1309 changed default maximum rate for yaw (was too low, old Stabi ignored that setting)
|
2014-05-01 19:33:03 +02:00 |
|
stabilizationsettingsbank2.xml
|
OP-1309 changed default maximum rate for yaw (was too low, old Stabi ignored that setting)
|
2014-05-01 19:33:03 +02:00 |
|
stabilizationsettingsbank3.xml
|
OP-1309 changed default maximum rate for yaw (was too low, old Stabi ignored that setting)
|
2014-05-01 19:33:03 +02:00 |
|
stabilizationstatus.xml
|
OP-1287 renamed VELOCITYCONTROL back to AltitudeVario for consistency
|
2014-06-03 18:42:54 +02:00 |
|
systemalarms.xml
|
OP-1412 change systemalarms to update periodic to not loose data
|
2014-07-22 23:50:39 +02:00 |
|
systemsettings.xml
|
OP-1063 Multi_config_Hexa_fixes Added OctoX, define new mixer table for Octo(p) and OctoX. New motor definition for OctoX (NNE, ENE...) Fixes for svg frames. Defined default settings for OctoP/X in setupwizard (but disabled)
|
2014-07-13 13:58:18 +02:00 |
|
systemstats.xml
|
OP-943 Raise heapremaining to uint32
|
2014-06-11 22:15:40 +02:00 |
|
takeofflocation.xml
|
OP-1350 Add takeofflocation UAVO
|
2014-05-16 00:40:19 +02:00 |
|
taskinfo.xml
|
remove two old stale lines in taskinfo
|
2014-04-06 19:19:48 +02:00 |
|
txpidsettings.xml
|
OP-984 Chnaged field type to enum and added options in uavo definitions.
|
2013-12-29 17:46:37 +01:00 |
|
velocitydesired.xml
|
set all uavobjects logging mode to manual
|
2013-11-17 20:45:04 +01:00 |
|
velocitystate.xml
|
set all uavobjects logging mode to manual
|
2013-11-17 20:45:04 +01:00 |
|
vtolpathfollowersettings.xml
|
OP-1288 Remove PositionSource from VtolPathFollowerSettings (with correct default setting)
|
2014-04-06 10:43:54 +02:00 |
|
watchdogstatus.xml
|
set all uavobjects logging mode to manual
|
2013-11-17 20:45:04 +01:00 |
|
waypoint.xml
|
Merge remote-tracking branch 'origin/next' into filnet/OP-1122_gcs_waypoint_editor_stabilization
|
2013-12-08 14:58:01 +01:00 |
|
waypointactive.xml
|
set all uavobjects logging mode to manual
|
2013-11-17 20:45:04 +01:00 |
