rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2025-02-10 00:54:15 +01:00
Code Issues Releases Activity
LibrePilot/ground/openpilotgcs/src/plugins/config
History
Laurent Lalanne 8c0a33cd6f OP-1698 First commit : Add Accessory0,1,2 to Output
2015-02-01 06:22:38 +01:00
..
calibration
OP-1504 Fixed some compiler warnings and uncrustified code.
2014-10-13 16:30:49 +02:00
cfg_vehicletypes
OP-1698 First commit : Add Accessory0,1,2 to Output
2015-02-01 06:22:38 +01:00
images
OP-1660 Display limits for every FlightMode position on Flightmode channel
2014-12-26 22:45:15 +01:00
airframe_ccpm.ui
OP-907 step 4: vehicle config UI cleanups
2013-04-13 17:58:11 +02:00
airframe_custom.ui
OP-1668 Adjusting layout.
2015-01-28 00:41:11 +01:00
airframe_fixedwing.ui
Disable sliders by default, as default airframe is Aileron and on a clean
2014-08-28 05:58:14 +10:00
airframe_ground.ui
OP-1622 Revert Car Throttle (only forward). Use only Curve2 for tank, Customtab display fix
2014-11-22 23:09:59 +01:00
airframe_multirotor.ui
OP-1698 First commit : Add Accessory0,1,2 to Output
2015-02-01 06:22:38 +01:00
airframe.ui
OP-1581 Add button to open Vehicle Configuration Wizard to Config plugin.
2014-10-29 00:30:06 +01:00
alignment-calibration.cpp
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
assertions.h
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
autotune.ui
AutoTune UI: add warning to reboot the board (something is better than nothing)
2012-11-14 17:49:37 +02:00
calibration.h
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
camerastabilization.ui
OP-1323 GCS label font tweaks
2014-05-06 21:52:32 -04:00
cc_hw_settings.ui
OP-1250 Add Gps Protocol configuration
2014-03-12 20:51:19 +01:00
ccattitude.ui
OP-1323 GCS label font tweaks
2014-05-06 21:52:32 -04:00
ccpm_old.ui
OP-907 step 2: moved vehicle specific code to respective vehicle widget
2013-04-13 17:58:03 +02:00
channelform.cpp
OP-1331 factored common code between InputChannelForm and OutputChannelForm into new abstract class ChannelForm
2014-05-12 22:30:50 +02:00
channelform.h
OP-1331 factored common code between InputChannelForm and OutputChannelForm into new abstract class ChannelForm
2014-05-12 22:30:50 +02:00
config_cc_hw_widget.cpp
uncrustify
2014-07-02 23:27:58 +02:00
config_cc_hw_widget.h
[OP-835] Qt 5.1.0 - migrated GCS plugins
2013-09-15 23:37:20 +02:00
config_dependencies.pri
OP-1525 Added curve and slider for StickExpo.
2014-10-08 00:55:35 +02:00
config_global.h
Moved framework to its own plugin
2012-02-05 18:16:38 +00:00
Config.pluginspec
OP-772: Normalize line endings
2013-04-05 23:46:56 +03:00
config.pri
Moved framework to its own plugin
2012-02-05 18:16:38 +00:00
config.pro
Merge branch 'filnet/OP-1331_alignment_issue_in_input_output_channel_config' into next
2014-05-16 23:51:13 +02:00
configautotunewidget.cpp
[OP-835] Qt 5.1.0 - migrated GCS plugins
2013-09-15 23:37:20 +02:00
configautotunewidget.h
[OP-835] Qt 5.1.0 - migrated GCS plugins
2013-09-15 23:37:20 +02:00
configcamerastabilizationwidget.cpp
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
configcamerastabilizationwidget.h
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
configccattitudewidget.cpp
OP-1337 French translations updates
2014-05-10 11:56:24 +02:00
configccattitudewidget.h
OP-1150 UI for thermal calibration: get rid of accel_scale no more needed after refactoring
2014-02-03 20:25:59 +01:00
configfactory.h
CC-33 Now the config panel only shows the relevant panel once the board is connected.
2011-03-29 20:32:09 +00:00
configgadget.cpp
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
configgadget.h
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
configgadget.qrc
OP-1660 Display limits for every FlightMode position on Flightmode channel
2014-12-26 22:45:15 +01:00
configgadgetfactory.cpp
OP-1552 Changed text of menu for input setup wizard.
2014-10-20 13:58:54 +02:00
configgadgetfactory.h
OP-1581 Add button to open Vehicle Configuration Wizard to Config plugin.
2014-10-29 00:30:06 +01:00
configgadgetwidget.cpp
OP-1331 uncrustified
2014-05-16 23:53:04 +02:00
configgadgetwidget.h
OP-1331 trying new approach to address input/output channel configuration grid alignment issues.
2014-05-10 20:40:14 +02:00
configinputwidget.cpp
Merge remote-tracking branch 'origin/abeck/gpsassist' into next
2015-01-09 21:44:23 +01:00
configinputwidget.h
OP-1660 Changes from review
2014-12-30 14:57:34 +01:00
configoutputwidget.cpp
uncrustification
2014-10-03 23:14:38 +02:00
configoutputwidget.h
OP-1517 Small adjustments.
2014-10-02 21:25:38 +02:00
configpipxtremewidget.cpp
OP-1674 Changes from review : added constants and set limits - UI changes, Freq close to channel number.
2015-01-22 23:56:20 +01:00
configpipxtremewidget.h
OP-1674 Changes from review : added constants and set limits - UI changes, Freq close to channel number.
2015-01-22 23:56:20 +01:00
configplugin.cpp
[OP-835] Qt 5.1.0 - migrated GCS plugins
2013-09-15 23:37:20 +02:00
configplugin.h
OP-1122 OP-1125 cleaned up GCS side uavtalk includes
2013-12-11 22:22:28 +01:00
configrevohwwidget.cpp
OP-1528 Add GUI support for Telemetry and Telemetry+PPM over the Flexi-IO port.
2014-10-07 00:44:06 +02:00
configrevohwwidget.h
OP-1528 Add GUI support for Telemetry and Telemetry+PPM over the Flexi-IO port.
2014-10-07 00:44:06 +02:00
configrevohwwidget.ui
OP-1528 Add GUI support for Telemetry and Telemetry+PPM over the Flexi-IO port.
2014-10-07 00:44:06 +02:00
configrevowidget.cpp
OP-1548 - Adding limits to FusionAlgorithm
2014-10-21 00:12:09 +02:00
configrevowidget.h
OP-1351 minor cleanups
2014-06-14 18:14:10 +02:00
configstabilizationwidget.cpp
Merge branch 'thread/OP-1590_PID_Bank_Management' into rel-14.10
2014-11-04 22:55:25 +01:00
configstabilizationwidget.h
OP-1590 Fixed issues found in review.
2014-11-04 22:05:17 +01:00
configtxpidwidget.cpp
OP-1534 Add expo and acro insanity factor to TxPID
2014-10-10 17:57:24 +02:00
configtxpidwidget.h
OP-1423 Use the TxPIDSettings::PIDsOptions enum instead of string comparisons
2014-08-05 19:31:26 +02:00
configvehicletypewidget.cpp
OP-1668 Fixed widget updates.
2015-01-27 15:05:59 +01:00
configvehicletypewidget.h
OP-1668 Fixed widget updates.
2015-01-27 15:05:59 +01:00
dblspindelegate.cpp
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
dblspindelegate.h
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
defaultattitude.ui
OP-935 Disables controls when no board is connected. Re-Factored the MixerCurve widget.
2013-05-04 00:13:15 +02:00
defaultattitudewidget.cpp
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
defaultattitudewidget.h
[OP-835] Qt 5.1.0 - migrated GCS plugins
2013-09-15 23:37:20 +02:00
defaulthwsettings.ui
OP-935 Adds checkbox for 'real time updates' to basic screen. Disables controls when no board is connected.
2013-05-01 12:59:07 +02:00
defaulthwsettingswidget.cpp
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
defaulthwsettingswidget.h
[OP-835] Qt 5.1.0 - migrated GCS plugins
2013-09-15 23:37:20 +02:00
fancytabwidget.cpp
OP-1170 Got rid of all compiler warning in Config Plugin
2014-02-26 17:17:37 +01:00
fancytabwidget.h
[OP-835] Qt 5.1.0 - migrated GCS plugins
2013-09-15 23:37:20 +02:00
gyro-calibration.cpp
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
input.ui
gpsassist: One commit new branch
2015-01-08 13:20:47 +11:00
inputchannelform.cpp
OP-1660 Little pixel issue on groove (margin left on blue, margin right on white) and margin not needed (not active, typo)
2015-01-03 13:01:25 +01:00
inputchannelform.h
OP-1660 Rcinput sliders : Add a small Red mark for neutral value - Tooltip for value
2014-12-27 08:09:59 +01:00
inputchannelform.ui
OP-1660 Allow realtime monitoring of inputs
2014-12-25 17:49:19 +01:00
legacy-calibration.cpp
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
mixercurve.cpp
OP-1474 Added Axis labels to curves.
2014-09-21 14:28:07 +02:00
mixercurve.h
OP-1474 Added Axis labels to curves.
2014-09-21 14:28:07 +02:00
mixercurve.ui
OP-1474 Added thrust PID scale curve to stabilization configuration GUI.
2014-09-06 23:53:44 +02:00
output.ui
Change speed on Wizard and output.ui for config plugin, this is just to be
2014-11-07 22:29:25 +11:00
outputchannelform.cpp
OP-1331 hopefully last tweaks for input/output channel alignment on CliffOS (most component width are now self adjusting)
2014-05-13 22:52:10 +02:00
outputchannelform.h
OP-1331 factored common code between InputChannelForm and OutputChannelForm into new abstract class ChannelForm
2014-05-12 22:30:50 +02:00
outputchannelform.ui
OP-1331 hopefully last tweaks for input/output channel alignment on CliffOS (most component width are now self adjusting)
2014-05-13 22:52:10 +02:00
pipxtreme.ui
OP-1674 Changes from review : added constants and set limits - UI changes, Freq close to channel number.
2015-01-22 23:56:20 +01:00
revosensors.ui
OP-1337 Typos fixes in code + Translation update
2014-07-05 18:51:16 +02:00
stabilization.ui
Merge remote-tracking branch 'origin/thread/OP-1556_Improve_ESC_Calib' into rel-14.10
2014-10-24 03:35:41 +11:00
twostep.cpp
Merge remote-tracking branch 'origin/next' into amorale/OP-1149_gyro_accel_thermal_calibration
2014-01-23 01:02:13 +01:00
txpid.ui
OP-1323 GCS label font tweaks
2014-05-06 21:52:32 -04:00
vernier.ui
OP-146 Stabilization config interface: this is a work in progress, and a pure mock-up of the UI, I would like feedback.
2011-02-22 22:03:32 +00:00