abeck70 8defea867b OP-1769 ground support wizard alignment with flight side code ... 1. Moved to using throttle curve 1 which is meant to be primary for throttle. Curve1 can support reversible motor mixer so ok. 2. Changed default throttle1 curve to linear 0-1 representing x>0. For x < 0 the same throttle curve is applied symmetrically to the reverse direction. 3. Allowed in UI both throttle curves to be visible. Throttle curve 2 manually can be used to mix other inputs to affect motor. E.g. slow down in turning.		2015-03-12 08:46:43 +11:00
..
calibration	OP-1504 Fixed some compiler warnings and uncrustified code.	2014-10-13 16:30:49 +02:00
cfg_vehicletypes	OP-1769 ground support wizard alignment with flight side code	2015-03-12 08:46:43 +11:00
images	OP-1466 Cosmetic changes to Svg / Layer order	2015-02-27 22:37:35 +01:00
airframe_ccpm.ui	GUI input / helicopter tab : Define first tab as default	2015-03-03 00:40:50 +01:00
airframe_custom.ui	OP-1668 Adjusting layout.	2015-01-28 00:41:11 +01:00
airframe_fixedwing.ui	Disable sliders by default, as default airframe is Aileron and on a clean	2014-08-28 05:58:14 +10:00
airframe_ground.ui	OP-1622 Revert Car Throttle (only forward). Use only Curve2 for tank, Customtab display fix	2014-11-22 23:09:59 +01:00
airframe_multirotor.ui	OP-1698 Added channel allocation checking - Little HexaH bug - Uncrustify	2015-02-01 18:02:19 +01:00
airframe.ui	OP-1581 Add button to open Vehicle Configuration Wizard to Config plugin.	2014-10-29 00:30:06 +01:00
alignment-calibration.cpp	Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES	2013-05-19 17:37:30 +03:00
assertions.h	Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES	2013-05-19 17:37:30 +03:00
autotune.ui	AutoTune UI: add warning to reboot the board (something is better than nothing)	2012-11-14 17:49:37 +02:00
calibration.h	Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES	2013-05-19 17:37:30 +03:00
camerastabilization.ui	Fixed layout	2015-03-02 22:22:41 +01:00
cc_hw_settings.ui	OP-1685 Fixed Output config layout, fixed HW config layout for CC.	2015-02-18 08:44:57 +01:00
ccattitude.ui	OP-1323 GCS label font tweaks	2014-05-06 21:52:32 -04:00
ccpm_old.ui	OP-907 step 2: moved vehicle specific code to respective vehicle widget	2013-04-13 17:58:03 +02:00
channelform.cpp	OP-1331 factored common code between InputChannelForm and OutputChannelForm into new abstract class ChannelForm	2014-05-12 22:30:50 +02:00
channelform.h	OP-1331 factored common code between InputChannelForm and OutputChannelForm into new abstract class ChannelForm	2014-05-12 22:30:50 +02:00
config_cc_hw_widget.cpp	uncrustify	2014-07-02 23:27:58 +02:00
config_cc_hw_widget.h	[OP-835] Qt 5.1.0 - migrated GCS plugins	2013-09-15 23:37:20 +02:00
config_dependencies.pri	OP-1525 Added curve and slider for StickExpo.	2014-10-08 00:55:35 +02:00
config_global.h	Moved framework to its own plugin	2012-02-05 18:16:38 +00:00
Config.pluginspec	OP-772: Normalize line endings	2013-04-05 23:46:56 +03:00
config.pri	Moved framework to its own plugin	2012-02-05 18:16:38 +00:00
config.pro	OP-969 - Fixed unnecessary resizing of input config wizard	2015-02-19 22:44:45 +10:00
configautotunewidget.cpp	[OP-835] Qt 5.1.0 - migrated GCS plugins	2013-09-15 23:37:20 +02:00
configautotunewidget.h	[OP-835] Qt 5.1.0 - migrated GCS plugins	2013-09-15 23:37:20 +02:00
configcamerastabilizationwidget.cpp	Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES	2013-05-19 17:37:30 +03:00
configcamerastabilizationwidget.h	Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES	2013-05-19 17:37:30 +03:00
configccattitudewidget.cpp	OP-1337 French translations updates	2014-05-10 11:56:24 +02:00
configccattitudewidget.h	OP-1150 UI for thermal calibration: get rid of accel_scale no more needed after refactoring	2014-02-03 20:25:59 +01:00
configfactory.h	CC-33 Now the config panel only shows the relevant panel once the board is connected.	2011-03-29 20:32:09 +00:00
configgadget.cpp	Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES	2013-05-19 17:37:30 +03:00
configgadget.h	Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES	2013-05-19 17:37:30 +03:00
configgadget.qrc	OP-1685 - Show a warning in output tab if config issues are found	2015-02-11 22:33:57 +01:00
configgadgetfactory.cpp	OP-1552 Changed text of menu for input setup wizard.	2014-10-20 13:58:54 +02:00
configgadgetfactory.h	OP-1581 Add button to open Vehicle Configuration Wizard to Config plugin.	2014-10-29 00:30:06 +01:00
configgadgetwidget.cpp	OP-1576 Removed TxResent from GUI. Renamed some files.	2015-02-02 21:25:38 +01:00
configgadgetwidget.h	OP-1331 trying new approach to address input/output channel configuration grid alignment issues.	2014-05-10 20:40:14 +02:00
configinputwidget.cpp	OP-1764 Add missing files and changes from review	2015-03-09 13:08:56 +01:00
configinputwidget.h	OP-1764 Add Throttle range check	2015-03-08 02:20:57 +01:00
configoplinkwidget.cpp	OP-1522 Remove unused channel set cfg	2015-02-02 21:25:38 +01:00
configoplinkwidget.h	OP-1576 Removed TxResent from GUI. Renamed some files.	2015-02-02 21:25:38 +01:00
configoutputwidget.cpp	OP-1768 Added PWMSync to warning text	2015-03-08 09:26:59 +01:00
configoutputwidget.h	Uncrustify	2015-02-23 00:01:22 +01:00
configplugin.cpp	[OP-835] Qt 5.1.0 - migrated GCS plugins	2013-09-15 23:37:20 +02:00
configplugin.h	OP-1122 OP-1125 cleaned up GCS side uavtalk includes	2013-12-11 22:22:28 +01:00
configrevohwwidget.cpp	OP-1528 Add GUI support for Telemetry and Telemetry+PPM over the Flexi-IO port.	2014-10-07 00:44:06 +02:00
configrevohwwidget.h	OP-1528 Add GUI support for Telemetry and Telemetry+PPM over the Flexi-IO port.	2014-10-07 00:44:06 +02:00
configrevohwwidget.ui	OP-1528 Add GUI support for Telemetry and Telemetry+PPM over the Flexi-IO port.	2014-10-07 00:44:06 +02:00
configrevowidget.cpp	OP-1548 - Adding limits to FusionAlgorithm	2014-10-21 00:12:09 +02:00
configrevowidget.h	OP-1351 minor cleanups	2014-06-14 18:14:10 +02:00
configstabilizationwidget.cpp	Merge branch 'thread/OP-1590_PID_Bank_Management' into rel-14.10	2014-11-04 22:55:25 +01:00
configstabilizationwidget.h	OP-1590 Fixed issues found in review.	2014-11-04 22:05:17 +01:00
configtxpidwidget.cpp	OP-1534 Add expo and acro insanity factor to TxPID	2014-10-10 17:57:24 +02:00
configtxpidwidget.h	OP-1423 Use the TxPIDSettings::PIDsOptions enum instead of string comparisons	2014-08-05 19:31:26 +02:00
configvehicletypewidget.cpp	OP-1635 Remove QuadH in config tab - AirframeType	2015-02-10 22:48:43 +01:00
configvehicletypewidget.h	OP-1668 Fixed widget updates.	2015-01-27 15:05:59 +01:00
dblspindelegate.cpp	Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES	2013-05-19 17:37:30 +03:00
dblspindelegate.h	Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES	2013-05-19 17:37:30 +03:00
defaultattitude.ui	OP-935 Disables controls when no board is connected. Re-Factored the MixerCurve widget.	2013-05-04 00:13:15 +02:00
defaultattitudewidget.cpp	Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES	2013-05-19 17:37:30 +03:00
defaultattitudewidget.h	[OP-835] Qt 5.1.0 - migrated GCS plugins	2013-09-15 23:37:20 +02:00
defaulthwsettings.ui	OP-935 Adds checkbox for 'real time updates' to basic screen. Disables controls when no board is connected.	2013-05-01 12:59:07 +02:00
defaulthwsettingswidget.cpp	Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES	2013-05-19 17:37:30 +03:00
defaulthwsettingswidget.h	[OP-835] Qt 5.1.0 - migrated GCS plugins	2013-09-15 23:37:20 +02:00
fancytabwidget.cpp	OP-1170 Got rid of all compiler warning in Config Plugin	2014-02-26 17:17:37 +01:00
fancytabwidget.h	[OP-835] Qt 5.1.0 - migrated GCS plugins	2013-09-15 23:37:20 +02:00
gyro-calibration.cpp	Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES	2013-05-19 17:37:30 +03:00
input_wizard.ui	OP-969 - Fixed unnecessary resizing of input config wizard	2015-02-19 22:44:45 +10:00
input.ui	Merge branch 'rel-15.02' RC4 into next	2015-03-07 16:47:46 +11:00
inputchannelform.cpp	OP-1660 Little pixel issue on groove (margin left on blue, margin right on white) and margin not needed (not active, typo)	2015-01-03 13:01:25 +01:00
inputchannelform.h	OP-1660 Rcinput sliders : Add a small Red mark for neutral value - Tooltip for value	2014-12-27 08:09:59 +01:00
inputchannelform.ui	OP-1660 Allow realtime monitoring of inputs	2014-12-25 17:49:19 +01:00
legacy-calibration.cpp	Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES	2013-05-19 17:37:30 +03:00
mixercurve.cpp	OP-1474 Added Axis labels to curves.	2014-09-21 14:28:07 +02:00
mixercurve.h	OP-1474 Added Axis labels to curves.	2014-09-21 14:28:07 +02:00
mixercurve.ui	OP-1474 Added thrust PID scale curve to stabilization configuration GUI.	2014-09-06 23:53:44 +02:00
oplink.ui	OP-1522 Remove unused channel set cfg	2015-02-02 21:25:38 +01:00
output.ui	OP-1685 Re-factored some code.	2015-02-22 14:46:08 +01:00
outputchannelform.cpp	missing uncrustification	2015-02-24 22:04:11 +01:00
outputchannelform.h	OP-1728 First commit - Maybe better behavior - Display motors with red handle	2015-02-18 00:34:38 +01:00
outputchannelform.ui	fix rogue \n in outputchannelform.ui	2015-02-24 12:16:30 +13:00
revosensors.ui	OP-1337 Typos fixes in code + Translation update	2014-07-05 18:51:16 +02:00
stabilization.ui	Fixed Stab layout	2015-03-02 23:32:04 +01:00
twostep.cpp	Merge remote-tracking branch 'origin/next' into amorale/OP-1149_gyro_accel_thermal_calibration	2014-01-23 01:02:13 +01:00
txpid.ui	OP-1323 GCS label font tweaks	2014-05-06 21:52:32 -04:00
vernier.ui	OP-146 Stabilization config interface: this is a work in progress, and a pure mock-up of the UI, I would like feedback.	2011-02-22 22:03:32 +00:00