LibrePilot

cfg_vehicletypes

Merge remote-tracking branch 'origin/rel-12.10.2' into next

2012-11-19 01:52:15 +02:00

images

OP-856 Basic implementation of hardware settings page.

2013-02-28 08:13:21 +01:00

airframe.ui

[OP-749] Fix GCS Tricopter config typo: "Tricopter Yaw MOTOR channel" (should be a servo)

2012-11-26 17:37:38 +02:00

alignment-calibration.cpp

OP-191: Merge from full-calibration branch. Add an implementation of TWOSTEP, including bias-only, bias + scale factor, and bias + scale factor + orthogonality calibration methods.

2011-03-21 00:45:40 +00:00

assertions.h

OP-191: Merge from full-calibration branch. Add an implementation of TWOSTEP, including bias-only, bias + scale factor, and bias + scale factor + orthogonality calibration methods.

2011-03-21 00:45:40 +00:00

autotune.ui

AutoTune UI: add warning to reboot the board (something is better than nothing)

2012-11-14 17:49:37 +02:00

calibration.h

OP-191: Merge from full-calibration branch. Add an implementation of TWOSTEP, including bias-only, bias + scale factor, and bias + scale factor + orthogonality calibration methods.

2011-03-21 00:45:40 +00:00

camerastabilization.ui

First version. Passes simple tests.

2013-01-30 18:57:32 -05:00

cc_hw_settings.ui

reworked ALL the ui pages in windows so they work there, so pushing this for now, it just needs love in osx

2012-09-08 18:35:14 -07:00

ccattitude.ui

OP-716 Corrected a spelling error.

2012-11-21 07:22:26 +01:00

ccpm.ui

Add support for coaxial helicopter.

2012-09-24 19:17:38 +02:00

config_cc_hw_widget.cpp

console: add debug console via USB CDC/VCP interface

2012-10-11 00:51:09 -04:00

config_cc_hw_widget.h

Merge branch 'next' of ssh://git.openpilot.org:22/OpenPilot into pt/gcs_uavobj_widget_framework

2012-02-11 22:29:03 +00:00

config_dependencies.pri

Moved framework to its own plugin

2012-02-05 18:16:38 +00:00

config_global.h

Moved framework to its own plugin

2012-02-05 18:16:38 +00:00

Config.pluginspec

OP-39 Added correct dependencies to SetupWizard plugin specification.

2012-10-02 23:17:56 +02:00

config.pri

Moved framework to its own plugin

2012-02-05 18:16:38 +00:00

config.pro

OP-856 Basic renaming from PRO to Revolution

2013-02-26 07:37:14 +01:00

configautotunewidget.cpp

GCS-Auto Tuning

2012-09-22 23:17:06 +01:00

configautotunewidget.h

GCS- Fixes compile error

2012-09-24 13:38:14 +01:00

configcamerastabilizationwidget.cpp

First version. Passes simple tests.

2013-01-30 18:57:32 -05:00

configcamerastabilizationwidget.h

CameraStab UI: fix spacing and add comments according to OP coding style guidelines

2012-08-15 10:31:19 +03:00

configccattitudewidget.cpp

OP-716 Corrected a spelling error.

2012-11-21 07:22:26 +01:00

configccattitudewidget.h

OP-716 Replaced AccelTau checkbox with numeric spinbox. Max value was set to 0,20 and min value to 0,00, step size 0,01. Added tooltip hinting to set to 0 to disable.

2012-11-20 19:25:57 +01:00

configfactory.h

CC-33 Now the config panel only shows the relevant panel once the board is connected.

2011-03-29 20:32:09 +00:00

configgadget.cpp

OP-306 Update all Gadgets so that they destroy their widgets properly when they die.

2011-02-01 23:01:52 +00:00

configgadget.h

Moved framework to its own plugin

2012-02-05 18:16:38 +00:00

configgadget.qrc

OP-856 Basic implementation of hardware settings page.

2013-02-28 08:13:21 +01:00

configgadgetconfiguration.cpp

CC-33 Now the config panel only shows the relevant panel once the board is connected.

2011-03-29 20:32:09 +00:00

configgadgetconfiguration.h

CC-33 Now the config panel only shows the relevant panel once the board is connected.

2011-03-29 20:32:09 +00:00

configgadgetfactory.cpp

OP-39 Added reboot page to wizard. User needing to reboot should NOT forget it now.

2012-09-16 23:03:15 +02:00

configgadgetfactory.h

OP-39 Added reboot page to wizard. User needing to reboot should NOT forget it now.

2012-09-16 23:03:15 +02:00

configgadgetoptionspage.cpp

CC-33 Now the config panel only shows the relevant panel once the board is connected.

2011-03-29 20:32:09 +00:00

configgadgetoptionspage.h

CC-33 Now the config panel only shows the relevant panel once the board is connected.

2011-03-29 20:32:09 +00:00

configgadgetwidget.cpp

OP-856 Basic implementation of hardware settings page.

2013-02-28 08:13:21 +01:00

configgadgetwidget.h

RFM22B/RM: Added rfm22b com device, moved remaining functionality in the radio module to the rfm22 driver, and simplified configuration of the PipX/OPLink. The radio device now presents itself completely as a com device, both in RadioComBridge (OPLink devices) and Telemetry (RM). Also change the PipXStatus and PipXSettings UAVOs to OPLinkStatus/OPLinkSettings.

2012-12-11 17:43:53 -07:00

configinputwidget.cpp

[OP-724] Remove LPF from throttle input channel (not necessary)

2012-12-02 13:50:03 +02:00

configinputwidget.h

Added support for Mode 3 and Mode 4 to the TX Configuration Wizard. Fixed a number of bugs and issues in the wizard. Made some changes to wizard text and layouts as well.

2012-11-11 00:31:06 +02:00

configoutputwidget.cpp

Fixed several compile warning complaints.

2012-08-21 16:18:58 +01:00

configoutputwidget.h

Remove the connection to refreshWidgetValues() in output widget. Mike was

2012-06-11 13:24:37 -05:00

configpipxtremewidget.cpp

Added PPM output to OPLink firmware

2013-01-04 06:51:27 -07:00

configpipxtremewidget.h

RFM22B/RM: Added rfm22b com device, moved remaining functionality in the radio module to the rfm22 driver, and simplified configuration of the PipX/OPLink. The radio device now presents itself completely as a com device, both in RadioComBridge (OPLink devices) and Telemetry (RM). Also change the PipXStatus and PipXSettings UAVOs to OPLinkStatus/OPLinkSettings.

2012-12-11 17:43:53 -07:00

configplugin.cpp

OP-39 Added code to jump from the SetupWizard directly to the InputWizard in the ConfigurationPlugin to complete the vehicle setup and realize the 1-2-Fly idea.

2012-08-03 18:31:47 +02:00

configplugin.h

More the system task priority down and increase the timeout for erasing the

2012-06-11 12:03:32 -05:00

configrevohwwidget.cpp

OP-856 Basic implementation of hardware settings page.

2013-02-28 08:13:21 +01:00

configrevohwwidget.h

OP-856 Basic implementation of hardware settings page.

2013-02-28 08:13:21 +01:00

configrevohwwidget.ui

OP-856 Basic implementation of hardware settings page.

2013-02-28 08:13:21 +01:00

configrevowidget.cpp

OP-796 defaults USE_PATHPLANNER to enabled

2013-01-14 01:28:33 +01:00

configrevowidget.h

Disable offset nulling while performing GCS mag calibration.

2012-07-25 11:26:37 -05:00

configstabilizationwidget.cpp

OP-794 Revert "GCS Stabilization: Force the apply button to always be there as I can't find expert mode"

2013-01-11 01:10:11 +01:00

configstabilizationwidget.h

Made the scroll event filter a member of the parent class.

2012-04-26 12:29:00 +01:00

configtxpidwidget.cpp

GCS - More fixes to the dirty status of the config widgets

2012-08-01 15:17:05 +01:00

configtxpidwidget.h

Made the scroll event filter a member of the parent class.

2012-04-26 12:29:00 +01:00

configvehicletypewidget.cpp

GCS-Fixes custom mixer saving bug

2012-10-13 17:45:41 +01:00

configvehicletypewidget.h

Added swapping of artwork when multirotor direction reversed.

2012-09-24 22:01:19 +02:00

dblspindelegate.cpp

mixercurve, dblspindelegate names

2012-07-09 09:07:22 -07:00

dblspindelegate.h

mixercurve, dblspindelegate names

2012-07-09 09:07:22 -07:00

defaultattitude.ui

CC-33 Now the config panel only shows the relevant panel once the board is connected.

2011-03-29 20:32:09 +00:00

defaultattitudewidget.cpp

OP-502 If a board is not connected, the "Save" button is grayed out. The "Apply" button is still enable, which enables creating configurations purely offline.

2011-06-07 16:56:16 +02:00

defaultattitudewidget.h

Moved framework to its own plugin

2012-02-05 18:16:38 +00:00

defaulthwsettings.ui

Added new hw config tab to the config gadget.

2011-07-19 14:50:42 +01:00

defaulthwsettingswidget.cpp

Fixed included file case.

2011-07-25 14:18:09 +01:00

defaulthwsettingswidget.h

Moved framework to its own plugin

2012-02-05 18:16:38 +00:00

fancytabwidget.cpp

Added "changes not saved" message warning to config gadget

2011-08-02 17:06:17 +01:00

fancytabwidget.h

Added "changes not saved" message warning to config gadget

2011-08-02 17:06:17 +01:00

gyro-calibration.cpp

OP-191: Merge from full-calibration branch. Add an implementation of TWOSTEP, including bias-only, bias + scale factor, and bias + scale factor + orthogonality calibration methods.

2011-03-21 00:45:40 +00:00

input.ui

[OP-728] Improve tooltip text for GCS arm timeout field

2012-11-18 20:55:54 +02:00

inputchannelform.cpp

Merge remote-tracking branch 'origin/brian/rfm22_autoconf' into next

2013-01-31 13:40:32 +00:00

inputchannelform.h

Made the scroll event filter a member of the parent class.

2012-04-26 12:29:00 +01:00

inputchannelform.ui

[OP-724] Add manual control input filtering (useful for camera gimbal)

2012-11-29 17:39:07 +02:00

legacy-calibration.cpp

OP-191: Merge from full-calibration branch. Add an implementation of TWOSTEP, including bias-only, bias + scale factor, and bias + scale factor + orthogonality calibration methods.

2011-03-21 00:45:40 +00:00

mixercurve.cpp

GCS-Review comments changes

2012-09-12 11:09:30 +01:00

mixercurve.h

GCS-Review comments changes

2012-09-12 11:09:30 +01:00

mixercurve.ui

almost done fixing any spacing isues, changed the font so its bigger, added some new stylesheet properties to linux and osx

2012-08-28 23:27:36 -07:00

output.ui

just doing local commits so I can grab it in my own branch, just spacing changes and a little rearrangement

2012-09-22 11:09:08 -07:00

outputchannelform.cpp

reworked ALL the ui pages in windows so they work there, so pushing this for now, it just needs love in osx

2012-09-08 18:35:14 -07:00

outputchannelform.h

Made the scroll event filter a member of the parent class.

2012-04-26 12:29:00 +01:00

outputchannelform.ui

reworked ALL the ui pages in windows so they work there, so pushing this for now, it just needs love in osx

2012-09-08 18:35:14 -07:00

pipxtreme.ui

Added PPM output to OPLink firmware

2013-01-04 06:51:27 -07:00

revosensors.ui

Get the sensor noise measurement working again, but through GCS now

2012-06-13 22:11:00 -05:00

stabilization.ui

couple little tweaks, is perfect on linux and windows, close enough on osx

2012-09-24 23:46:34 -07:00

twostep.cpp

Fixed problems that blocked compiling on Windows

2011-04-11 10:07:06 +00:00

txpid.ui

couple little tweaks, is perfect on linux and windows, close enough on osx

2012-09-24 23:46:34 -07:00

vernier.ui

OP-146 Stabilization config interface: this is a work in progress, and a pure mock-up of the UI, I would like feedback.

2011-02-22 22:03:32 +00:00