1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-12 20:08:48 +01:00
LibrePilot/flight/CopterControl/Makefile

613 lines
19 KiB
Makefile
Raw Normal View History

#####
# Project: OpenPilot
#
#
# Makefile for OpenPilot project build PiOS and the AP.
#
# The OpenPilot Team, http://www.openpilot.org, Copyright (C) 2009.
#
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#####
WHEREAMI := $(dir $(lastword $(MAKEFILE_LIST)))
TOP := $(realpath $(WHEREAMI)/../../)
include $(TOP)/make/firmware-defs.mk
include $(TOP)/make/boards/$(BOARD_NAME)/board-info.mk
# Target file name (without extension).
TARGET := fw_$(BOARD_NAME)
# Directory for output files (lst, obj, dep, elf, sym, map, hex, bin etc.)
OUTDIR := $(TOP)/build/$(TARGET)
# Set developer code and compile options
# Set to YES to compile for debugging
DEBUG ?= NO
# Set to YES to build a FW version that will erase all flash memory
ERASE_FLASH ?= NO
# Set to YES to use the Servo output pins for debugging via scope or logic analyser
ENABLE_DEBUG_PINS ?= NO
# Set to Yes to enable the AUX UART which is mapped on the S1 (Tx) and S2 (Rx) servo outputs
ENABLE_AUX_UART ?= NO
USE_GPS ?= NO
USE_I2C ?= NO
# Set to YES when using Code Sourcery toolchain
CODE_SOURCERY ?= YES
# Remove command is different for Code Sourcery on Windows
ifeq ($(CODE_SOURCERY), YES)
REMOVE_CMD = cs-rm
else
REMOVE_CMD = rm
endif
FLASH_TOOL = OPENOCD
# List of modules to include
MODULES = Telemetry Attitude Stabilization Actuator ManualControl FirmwareIAP
# Paths
OPSYSTEM = ./System
OPSYSTEMINC = $(OPSYSTEM)/inc
OPUAVTALK = ../UAVTalk
OPUAVTALKINC = $(OPUAVTALK)/inc
OPUAVOBJ = ../UAVObjects
OPUAVOBJINC = $(OPUAVOBJ)/inc
OPTESTS = ./Tests
OPMODULEDIR = ../Modules
FLIGHTLIB = ../Libraries
FLIGHTLIBINC = $(FLIGHTLIB)/inc
PIOS = ../PiOS
PIOSINC = $(PIOS)/inc
PIOSSTM32F10X = $(PIOS)/STM32F10x
PIOSCOMMON = $(PIOS)/Common
PIOSBOARDS = $(PIOS)/Boards
APPLIBDIR = $(PIOSSTM32F10X)/Libraries
STMLIBDIR = $(APPLIBDIR)
STMSPDDIR = $(STMLIBDIR)/STM32F10x_StdPeriph_Driver
STMUSBDIR = $(STMLIBDIR)/STM32_USB-FS-Device_Driver
STMSPDSRCDIR = $(STMSPDDIR)/src
STMSPDINCDIR = $(STMSPDDIR)/inc
STMUSBSRCDIR = $(STMUSBDIR)/src
STMUSBINCDIR = $(STMUSBDIR)/inc
CMSISDIR = $(STMLIBDIR)/CMSIS/Core/CM3
DOSFSDIR = $(APPLIBDIR)/dosfs
MSDDIR = $(APPLIBDIR)/msd
RTOSDIR = $(APPLIBDIR)/FreeRTOS
RTOSSRCDIR = $(RTOSDIR)/Source
RTOSINCDIR = $(RTOSSRCDIR)/include
DOXYGENDIR = ../Doc/Doxygen
AHRSBOOTLOADER = ../Bootloaders/AHRS/
AHRSBOOTLOADERINC = $(AHRSBOOTLOADER)/inc
PYMITE = $(FLIGHTLIB)/PyMite
PYMITELIB = $(PYMITE)/lib
PYMITEPLAT = $(PYMITE)/platform/openpilot
PYMITETOOLS = $(PYMITE)/tools
PYMITEVM = $(PYMITE)/vm
PYMITEINC = $(PYMITEVM)
PYMITEINC += $(PYMITEPLAT)
PYMITEINC += $(OUTDIR)
FLIGHTPLANLIB = $(OPMODULEDIR)/FlightPlan/lib
FLIGHTPLANS = $(OPMODULEDIR)/FlightPlan/flightplans
OPUAVSYNTHDIR = $(OUTDIR)/../uavobject-synthetics/flight
# List C source files here. (C dependencies are automatically generated.)
# use file-extension c for "c-only"-files
ifndef TESTAPP
## MODULES
SRC += ${foreach MOD, ${MODULES}, ${wildcard ${OPMODULEDIR}/${MOD}/*.c}}
## OPENPILOT CORE:
SRC += ${OPMODULEDIR}/System/systemmod.c
SRC += $(OPSYSTEM)/coptercontrol.c
SRC += $(OPSYSTEM)/pios_board.c
SRC += $(OPSYSTEM)/alarms.c
SRC += $(OPSYSTEM)/taskmonitor.c
SRC += $(OPUAVTALK)/uavtalk.c
SRC += $(OPUAVOBJ)/uavobjectmanager.c
SRC += $(OPUAVOBJ)/eventdispatcher.c
SRC += $(OPUAVOBJ)/uavobjectsinit_linker.c
SRC += $(OPSYSTEM)/pios_usb_hid_desc.c
else
## TESTCODE
SRC += $(OPTESTS)/test_common.c
SRC += $(OPTESTS)/$(TESTAPP).c
endif
## UAVOBJECTS
ifndef TESTAPP
SRC += $(OPUAVSYNTHDIR)/accessorydesired.c
SRC += $(OPUAVSYNTHDIR)/objectpersistence.c
SRC += $(OPUAVSYNTHDIR)/gcstelemetrystats.c
SRC += $(OPUAVSYNTHDIR)/flighttelemetrystats.c
SRC += $(OPUAVSYNTHDIR)/flightstatus.c
SRC += $(OPUAVSYNTHDIR)/systemstats.c
SRC += $(OPUAVSYNTHDIR)/systemalarms.c
SRC += $(OPUAVSYNTHDIR)/systemsettings.c
SRC += $(OPUAVSYNTHDIR)/stabilizationdesired.c
SRC += $(OPUAVSYNTHDIR)/stabilizationsettings.c
SRC += $(OPUAVSYNTHDIR)/actuatorcommand.c
SRC += $(OPUAVSYNTHDIR)/actuatordesired.c
SRC += $(OPUAVSYNTHDIR)/actuatorsettings.c
SRC += $(OPUAVSYNTHDIR)/attituderaw.c
SRC += $(OPUAVSYNTHDIR)/attitudeactual.c
SRC += $(OPUAVSYNTHDIR)/manualcontrolcommand.c
SRC += $(OPUAVSYNTHDIR)/taskinfo.c
SRC += $(OPUAVSYNTHDIR)/i2cstats.c
SRC += $(OPUAVSYNTHDIR)/watchdogstatus.c
SRC += $(OPUAVSYNTHDIR)/telemetrysettings.c
SRC += $(OPUAVSYNTHDIR)/ratedesired.c
SRC += $(OPUAVSYNTHDIR)/manualcontrolsettings.c
SRC += $(OPUAVSYNTHDIR)/mixersettings.c
SRC += $(OPUAVSYNTHDIR)/mixerstatus.c
SRC += $(OPUAVSYNTHDIR)/firmwareiapobj.c
SRC += $(OPUAVSYNTHDIR)/attitudesettings.c
bootcfg: use UAVobj to control boot-time HW config This should mark an end to the compile-time selection of HW configurations. Minor changes in board initialization for all platforms: - Most config structs are marked static to prevent badly written drivers from directly referring to config data. - Adapt to changes in .irq fields in config data. - Adapt to changes in USART IRQ handling. Major changes in board initialization for CC: - Use HwSettings UAVObj to decide which drivers to attach to the "main" port and the flexi port, and select the appropriate device configuration data. - HwSettings allows choosing between Disabled, Telemetry, SBUS, Spektrum,GPS, and I2C for each of the two ports. - Use ManualControlSettings.InputMode to init/configure the appropriate receiver module, and register its available rx channels with the PIOS_RCVR layer. Can choose between PWM, Spektrum and PPM at board init time. PPM driver is broken, and SBUS will work once it is added to this UAVObj as an option. - CC build now includes code for SBUS, Spektrum and PWM receivers in every firmware image. PIOS_USART driver: - Now handles its own low-level IRQs internally - If NULL upper-level IRQ handler is bound in at board init time then rx/tx is satisfied by internal PIOS_USART buffered IO routines which are (typically) attached to the COM layer. - If an alternate upper-level IRQ handler is bound in at board init then that handler is called and expected to clear down the USART IRQ sources. This is used by Spektrum and SBUS drivers. PIOS_SBUS and PIOS_SPEKTRUM drivers: - Improved data/API hiding - No longer assume they know where their config data is stored which allows for boot-time alternate configurations for the driver. - Now registers an upper-level IRQ handlerwith the USART layer to decouple the driver from which USART it is actually attached to.
2011-07-06 02:21:00 +02:00
SRC += $(OPUAVSYNTHDIR)/hwsettings.c
#${wildcard ${OBJ}/$(shell echo $(VAR) | tr A-Z a-z)/*.c}
#SRC += ${foreach OBJ, ${UAVOBJECTS}, $(UAVOBJECTS)/$(OBJ).c}
# Cant use until i can automatically generate list of UAVObjects
#SRC += ${OUTDIR}/InitObjects.c
endif
## PIOS Hardware (STM32F10x)
SRC += $(PIOSSTM32F10X)/pios_sys.c
SRC += $(PIOSSTM32F10X)/pios_led.c
SRC += $(PIOSSTM32F10X)/pios_delay.c
SRC += $(PIOSSTM32F10X)/pios_usart.c
SRC += $(PIOSSTM32F10X)/pios_irq.c
SRC += $(PIOSSTM32F10X)/pios_adc.c
SRC += $(PIOSSTM32F10X)/pios_servo.c
SRC += $(PIOSSTM32F10X)/pios_i2c.c
SRC += $(PIOSSTM32F10X)/pios_spi.c
SRC += $(PIOSSTM32F10X)/pios_ppm.c
SRC += $(PIOSSTM32F10X)/pios_pwm.c
SRC += $(PIOSSTM32F10X)/pios_spektrum.c
SRC += $(PIOSSTM32F10X)/pios_sbus.c
SRC += $(PIOSSTM32F10X)/pios_debug.c
SRC += $(PIOSSTM32F10X)/pios_gpio.c
SRC += $(PIOSSTM32F10X)/pios_exti.c
SRC += $(PIOSSTM32F10X)/pios_rtc.c
SRC += $(PIOSSTM32F10X)/pios_wdg.c
# PIOS USB related files (seperated to make code maintenance more easy)
SRC += $(PIOSSTM32F10X)/pios_usb_hid.c
SRC += $(PIOSSTM32F10X)/pios_usb_hid_istr.c
SRC += $(PIOSSTM32F10X)/pios_usb_hid_prop.c
SRC += $(PIOSSTM32F10X)/pios_usb_hid_pwr.c
## PIOS Hardware (Common)
SRC += $(PIOSCOMMON)/pios_crc.c
SRC += $(PIOSCOMMON)/pios_flashfs_objlist.c
SRC += $(PIOSCOMMON)/pios_flash_w25x.c
SRC += $(PIOSCOMMON)/pios_adxl345.c
SRC += $(PIOSCOMMON)/pios_com.c
SRC += $(PIOSCOMMON)/pios_i2c_esc.c
SRC += $(PIOSCOMMON)/pios_iap.c
SRC += $(PIOSCOMMON)/pios_bl_helper.c
SRC += $(PIOSCOMMON)/pios_rcvr.c
SRC += $(PIOSCOMMON)/printf-stdarg.c
## Libraries for flight calculations
SRC += $(FLIGHTLIB)/fifo_buffer.c
SRC += $(FLIGHTLIB)/CoordinateConversions.c
## CMSIS for STM32
SRC += $(CMSISDIR)/core_cm3.c
SRC += $(CMSISDIR)/system_stm32f10x.c
## Used parts of the STM-Library
SRC += $(STMSPDSRCDIR)/stm32f10x_adc.c
SRC += $(STMSPDSRCDIR)/stm32f10x_bkp.c
SRC += $(STMSPDSRCDIR)/stm32f10x_crc.c
SRC += $(STMSPDSRCDIR)/stm32f10x_dac.c
SRC += $(STMSPDSRCDIR)/stm32f10x_dma.c
SRC += $(STMSPDSRCDIR)/stm32f10x_exti.c
SRC += $(STMSPDSRCDIR)/stm32f10x_flash.c
SRC += $(STMSPDSRCDIR)/stm32f10x_gpio.c
SRC += $(STMSPDSRCDIR)/stm32f10x_i2c.c
SRC += $(STMSPDSRCDIR)/stm32f10x_pwr.c
SRC += $(STMSPDSRCDIR)/stm32f10x_rcc.c
SRC += $(STMSPDSRCDIR)/stm32f10x_rtc.c
SRC += $(STMSPDSRCDIR)/stm32f10x_spi.c
SRC += $(STMSPDSRCDIR)/stm32f10x_tim.c
SRC += $(STMSPDSRCDIR)/stm32f10x_usart.c
SRC += $(STMSPDSRCDIR)/stm32f10x_iwdg.c
SRC += $(STMSPDSRCDIR)/stm32f10x_dbgmcu.c
SRC += $(STMSPDSRCDIR)/misc.c
## STM32 USB Library
SRC += $(STMUSBSRCDIR)/usb_core.c
SRC += $(STMUSBSRCDIR)/usb_init.c
SRC += $(STMUSBSRCDIR)/usb_int.c
SRC += $(STMUSBSRCDIR)/usb_mem.c
SRC += $(STMUSBSRCDIR)/usb_regs.c
SRC += $(STMUSBSRCDIR)/usb_sil.c
## RTOS
SRC += $(RTOSSRCDIR)/list.c
SRC += $(RTOSSRCDIR)/queue.c
SRC += $(RTOSSRCDIR)/tasks.c
## RTOS Portable
SRC += $(RTOSSRCDIR)/portable/GCC/ARM_CM3/port.c
SRC += $(RTOSSRCDIR)/portable/MemMang/heap_1.c
## Dosfs file system
#SRC += $(DOSFSDIR)/dosfs.c
#SRC += $(DOSFSDIR)/dfs_sdcard.c
## PyMite files
#SRC += $(wildcard ${PYMITEVM}/*.c)
#SRC += $(wildcard ${PYMITEPLAT}/*.c)
#SRC += $(OUTDIR)/pmlib_img.c
#SRC += $(OUTDIR)/pmlib_nat.c
#SRC += $(OUTDIR)/pmlibusr_img.c
#SRC += $(OUTDIR)/pmlibusr_nat.c
## Mass Storage Device
#SRC += $(MSDDIR)/msd.c
#SRC += $(MSDDIR)/msd_bot.c
#SRC += $(MSDDIR)/msd_desc.c
#SRC += $(MSDDIR)/msd_memory.c
#SRC += $(MSDDIR)/msd_scsi.c
#SRC += $(MSDDIR)/msd_scsi_data.c
# List C source files here which must be compiled in ARM-Mode (no -mthumb).
# use file-extension c for "c-only"-files
## just for testing, timer.c could be compiled in thumb-mode too
SRCARM =
# List C++ source files here.
# use file-extension .cpp for C++-files (not .C)
CPPSRC =
# List C++ source files here which must be compiled in ARM-Mode.
# use file-extension .cpp for C++-files (not .C)
#CPPSRCARM = $(TARGET).cpp
CPPSRCARM =
# List Assembler source files here.
# Make them always end in a capital .S. Files ending in a lowercase .s
# will not be considered source files but generated files (assembler
# output from the compiler), and will be deleted upon "make clean"!
# Even though the DOS/Win* filesystem matches both .s and .S the same,
# it will preserve the spelling of the filenames, and gcc itself does
# care about how the name is spelled on its command-line.
ASRC = $(PIOSSTM32F10X)/startup_stm32f10x_$(MODEL)$(MODEL_SUFFIX).S
# List Assembler source files here which must be assembled in ARM-Mode..
ASRCARM =
# List any extra directories to look for include files here.
# Each directory must be seperated by a space.
EXTRAINCDIRS = $(OPSYSTEM)
EXTRAINCDIRS += $(OPSYSTEMINC)
EXTRAINCDIRS += $(OPUAVTALK)
EXTRAINCDIRS += $(OPUAVTALKINC)
EXTRAINCDIRS += $(OPUAVOBJ)
EXTRAINCDIRS += $(OPUAVOBJINC)
EXTRAINCDIRS += $(OPUAVSYNTHDIR)
EXTRAINCDIRS += $(PIOS)
EXTRAINCDIRS += $(PIOSINC)
EXTRAINCDIRS += $(FLIGHTLIBINC)
EXTRAINCDIRS += $(PIOSSTM32F10X)
EXTRAINCDIRS += $(PIOSCOMMON)
EXTRAINCDIRS += $(PIOSBOARDS)
EXTRAINCDIRS += $(STMSPDINCDIR)
EXTRAINCDIRS += $(STMUSBINCDIR)
EXTRAINCDIRS += $(CMSISDIR)
EXTRAINCDIRS += $(DOSFSDIR)
EXTRAINCDIRS += $(MSDDIR)
EXTRAINCDIRS += $(RTOSINCDIR)
EXTRAINCDIRS += $(APPLIBDIR)
EXTRAINCDIRS += $(RTOSSRCDIR)/portable/GCC/ARM_CM3
EXTRAINCDIRS += $(AHRSBOOTLOADERINC)
EXTRAINCDIRS += $(PYMITEINC)
EXTRAINCDIRS += ${foreach MOD, ${MODULES}, ${OPMODULEDIR}/${MOD}/inc} ${OPMODULEDIR}/System/inc
# List any extra directories to look for library files here.
# Also add directories where the linker should search for
# includes from linker-script to the list
# Each directory must be seperated by a space.
EXTRA_LIBDIRS =
# Extra Libraries
# Each library-name must be seperated by a space.
# i.e. to link with libxyz.a, libabc.a and libefsl.a:
# EXTRA_LIBS = xyz abc efsl
# for newlib-lpc (file: libnewlibc-lpc.a):
# EXTRA_LIBS = newlib-lpc
EXTRA_LIBS =
# Path to Linker-Scripts
LINKERSCRIPTPATH = $(PIOSSTM32F10X)
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
ifeq ($(DEBUG),YES)
OPT = 1
else
OPT = s
endif
# Output format. (can be ihex or binary or both)
# binary to create a load-image in raw-binary format i.e. for SAM-BA,
# ihex to create a load-image in Intel hex format
#LOADFORMAT = ihex
#LOADFORMAT = binary
LOADFORMAT = both
# Debugging format.
DEBUGF = dwarf-2
# Place project-specific -D (define) and/or
# -U options for C here.
CDEFS = -DSTM32F10X_$(MODEL)
CDEFS += -DUSE_STDPERIPH_DRIVER
CDEFS += -DUSE_$(BOARD)
ifeq ($(ENABLE_DEBUG_PINS), YES)
CDEFS += -DPIOS_ENABLE_DEBUG_PINS
endif
ifeq ($(ENABLE_AUX_UART), YES)
CDEFS += -DPIOS_ENABLE_AUX_UART
endif
ifeq ($(ERASE_FLASH), YES)
CDEFS += -DERASE_FLASH
endif
ifneq ($(USE_GPS), NO)
CDEFS += -DUSE_GPS
endif
ifeq ($(USE_I2C), YES)
CDEFS += -DUSE_I2C
endif
# Place project-specific -D and/or -U options for
# Assembler with preprocessor here.
#ADEFS = -DUSE_IRQ_ASM_WRAPPER
ADEFS = -D__ASSEMBLY__
# Compiler flag to set the C Standard level.
# c89 - "ANSI" C
# gnu89 - c89 plus GCC extensions
# c99 - ISO C99 standard (not yet fully implemented)
# gnu99 - c99 plus GCC extensions
CSTANDARD = -std=gnu99
#-----
# Compiler flags.
# -g*: generate debugging information
# -O*: optimization level
# -f...: tuning, see GCC manual and avr-libc documentation
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
#
# Flags for C and C++ (arm-elf-gcc/arm-elf-g++)
ifeq ($(DEBUG),YES)
CFLAGS = -DDEBUG
endif
CFLAGS += -g$(DEBUGF)
CFLAGS += -O$(OPT)
CFLAGS += -mcpu=$(MCU)
CFLAGS += $(CDEFS)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) -I.
#CFLAGS += -fno-cprop-registers -fno-defer-pop -fno-guess-branch-probability -fno-section-anchors
#CFLAGS += -fno-if-conversion -fno-if-conversion2 -fno-ipa-pure-const -fno-ipa-reference -fno-merge-constants
#CFLAGS += -fno-split-wide-types -fno-tree-ccp -fno-tree-ch -fno-tree-copy-prop -fno-tree-copyrename
#CFLAGS += -fno-tree-dce -fno-tree-dominator-opts -fno-tree-dse -fno-tree-fre -fno-tree-sink -fno-tree-sra
#CFLAGS += -fno-tree-ter
#CFLAGS += -g$(DEBUGF) -DDEBUG
CFLAGS += -mapcs-frame
CFLAGS += -fomit-frame-pointer
CFLAGS += -fpromote-loop-indices
CFLAGS += -Wall
CFLAGS += -Werror
CFLAGS += -Wa,-adhlns=$(addprefix $(OUTDIR)/, $(notdir $(addsuffix .lst, $(basename $<))))
# Compiler flags to generate dependency files:
CFLAGS += -MD -MP -MF $(OUTDIR)/dep/$(@F).d
# flags only for C
#CONLYFLAGS += -Wnested-externs
CONLYFLAGS += $(CSTANDARD)
# Assembler flags.
# -Wa,...: tell GCC to pass this to the assembler.
# -ahlns: create listing
ASFLAGS = -mcpu=$(MCU) -I. -x assembler-with-cpp
ASFLAGS += $(ADEFS)
ASFLAGS += -Wa,-adhlns=$(addprefix $(OUTDIR)/, $(notdir $(addsuffix .lst, $(basename $<))))
ASFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
MATH_LIB = -lm
# Linker flags.
# -Wl,...: tell GCC to pass this to linker.
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS = -nostartfiles -Wl,-Map=$(OUTDIR)/$(TARGET).map,--cref,--gc-sections
LDFLAGS += $(patsubst %,-L%,$(EXTRA_LIBDIRS))
LDFLAGS += -lc
LDFLAGS += $(patsubst %,-l%,$(EXTRA_LIBS))
LDFLAGS += $(MATH_LIB)
LDFLAGS += -lc -lgcc
# Set linker-script name depending on selected submodel name
LDFLAGS += -T$(LINKERSCRIPTPATH)/link_$(BOARD)_memory.ld
LDFLAGS += -T$(LINKERSCRIPTPATH)/link_$(BOARD)_sections.ld
# Define programs and commands.
REMOVE = $(REMOVE_CMD) -f
PYTHON = python
# List of all source files.
ALLSRC = $(ASRCARM) $(ASRC) $(SRCARM) $(SRC) $(CPPSRCARM) $(CPPSRC)
# List of all source files without directory and file-extension.
ALLSRCBASE = $(notdir $(basename $(ALLSRC)))
# Define all object files.
ALLOBJ = $(addprefix $(OUTDIR)/, $(addsuffix .o, $(ALLSRCBASE)))
# Define all listing files (used for make clean).
LSTFILES = $(addprefix $(OUTDIR)/, $(addsuffix .lst, $(ALLSRCBASE)))
# Define all depedency-files (used for make clean).
DEPFILES = $(addprefix $(OUTDIR)/dep/, $(addsuffix .o.d, $(ALLSRCBASE)))
# Default target.
all: build
ifeq ($(LOADFORMAT),ihex)
build: elf hex lss sym
else
ifeq ($(LOADFORMAT),binary)
build: elf bin lss sym
else
ifeq ($(LOADFORMAT),both)
build: elf hex bin lss sym
else
$(error "$(MSG_FORMATERROR) $(FORMAT)")
endif
endif
endif
# Generate code for PyMite
#$(OUTDIR)/pmlib_img.c $(OUTDIR)/pmlib_nat.c $(OUTDIR)/pmlibusr_img.c $(OUTDIR)/pmlibusr_nat.c $(OUTDIR)/pmfeatures.h: $(wildcard $(PYMITELIB)/*.py) $(wildcard $(PYMITEPLAT)/*.py) $(wildcard $(FLIGHTPLANLIB)/*.py) $(wildcard $(FLIGHTPLANS)/*.py)
# @echo $(MSG_PYMITEINIT) $(call toprel, $@)
# @$(PYTHON) $(PYMITETOOLS)/pmImgCreator.py -f $(PYMITEPLAT)/pmfeatures.py -c -s --memspace=flash -o $(OUTDIR)/pmlib_img.c --native-file=$(OUTDIR)/pmlib_nat.c $(PYMITELIB)/list.py $(PYMITELIB)/dict.py $(PYMITELIB)/__bi.py $(PYMITELIB)/sys.py $(PYMITELIB)/string.py $(wildcard $(FLIGHTPLANLIB)/*.py)
# @$(PYTHON) $(PYMITETOOLS)/pmGenPmFeatures.py $(PYMITEPLAT)/pmfeatures.py > $(OUTDIR)/pmfeatures.h
# @$(PYTHON) $(PYMITETOOLS)/pmImgCreator.py -f $(PYMITEPLAT)/pmfeatures.py -c -u -o $(OUTDIR)/pmlibusr_img.c --native-file=$(OUTDIR)/pmlibusr_nat.c $(FLIGHTPLANS)/test.py
# Link: create ELF output file from object files.
$(eval $(call LINK_TEMPLATE, $(OUTDIR)/$(TARGET).elf, $(ALLOBJ)))
# Assemble: create object files from assembler source files.
$(foreach src, $(ASRC), $(eval $(call ASSEMBLE_TEMPLATE, $(src))))
# Assemble: create object files from assembler source files. ARM-only
$(foreach src, $(ASRCARM), $(eval $(call ASSEMBLE_ARM_TEMPLATE, $(src))))
# Compile: create object files from C source files.
$(foreach src, $(SRC), $(eval $(call COMPILE_C_TEMPLATE, $(src))))
# Compile: create object files from C source files. ARM-only
$(foreach src, $(SRCARM), $(eval $(call COMPILE_C_ARM_TEMPLATE, $(src))))
# Compile: create object files from C++ source files.
$(foreach src, $(CPPSRC), $(eval $(call COMPILE_CPP_TEMPLATE, $(src))))
# Compile: create object files from C++ source files. ARM-only
$(foreach src, $(CPPSRCARM), $(eval $(call COMPILE_CPP_ARM_TEMPLATE, $(src))))
# Compile: create assembler files from C source files. ARM/Thumb
$(eval $(call PARTIAL_COMPILE_TEMPLATE, SRC))
# Compile: create assembler files from C source files. ARM only
$(eval $(call PARTIAL_COMPILE_ARM_TEMPLATE, SRCARM))
$(OUTDIR)/$(TARGET).bin.o: $(OUTDIR)/$(TARGET).bin
$(eval $(call OPFW_TEMPLATE,$(OUTDIR)/$(TARGET).bin,$(BOARD_TYPE),$(BOARD_REVISION)))
# Add jtag targets (program and wipe)
$(eval $(call JTAG_TEMPLATE,$(OUTDIR)/$(TARGET).bin,$(FW_BANK_BASE),$(FW_BANK_SIZE)))
.PHONY: elf lss sym hex bin bino opfw
elf: $(OUTDIR)/$(TARGET).elf
lss: $(OUTDIR)/$(TARGET).lss
sym: $(OUTDIR)/$(TARGET).sym
hex: $(OUTDIR)/$(TARGET).hex
bin: $(OUTDIR)/$(TARGET).bin
bino: $(OUTDIR)/$(TARGET).bin.o
opfw: $(OUTDIR)/$(TARGET).opfw
# Display sizes of sections.
$(eval $(call SIZE_TEMPLATE, $(OUTDIR)/$(TARGET).elf))
# Generate Doxygen documents
docs:
doxygen $(DOXYGENDIR)/doxygen.cfg
# Install: install binary file with prefix/suffix into install directory
install: $(OUTDIR)/$(TARGET).opfw
ifneq ($(INSTALL_DIR),)
@echo $(MSG_INSTALLING) $(call toprel, $<)
$(V1) mkdir -p $(INSTALL_DIR)
$(V1) $(INSTALL) $< $(INSTALL_DIR)/$(INSTALL_PFX)$(TARGET)$(INSTALL_SFX).opfw
else
$(error INSTALL_DIR must be specified for $@)
endif
# Target: clean project.
clean: clean_list
clean_list :
@echo $(MSG_CLEANING)
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).map
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).elf
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).hex
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).bin
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).sym
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).lss
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).bin.o
$(V1) $(REMOVE) $(wildcard $(OUTDIR)/*.c)
$(V1) $(REMOVE) $(wildcard $(OUTDIR)/*.h)
$(V1) $(REMOVE) $(ALLOBJ)
$(V1) $(REMOVE) $(LSTFILES)
$(V1) $(REMOVE) $(DEPFILES)
$(V1) $(REMOVE) $(SRC:.c=.s)
$(V1) $(REMOVE) $(SRCARM:.c=.s)
$(V1) $(REMOVE) $(CPPSRC:.cpp=.s)
$(V1) $(REMOVE) $(CPPSRCARM:.cpp=.s)
# Create output files directory
# all known MS Windows OS define the ComSpec environment variable
ifdef ComSpec
$(shell md $(subst /,\\,$(OUTDIR)) 2>NUL)
else
$(shell mkdir -p $(OUTDIR) 2>/dev/null)
endif
# Include the dependency files.
ifdef ComSpec
-include $(shell md $(subst /,\\,$(OUTDIR))\dep 2>NUL) $(wildcard $(OUTDIR)/dep/*)
else
-include $(shell mkdir -p $(OUTDIR) 2>/dev/null) $(shell mkdir $(OUTDIR)/dep 2>/dev/null) $(wildcard $(OUTDIR)/dep/*)
endif
# Listing of phony targets.
.PHONY : all build clean clean_list install