rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-13 20:48:42 +01:00
Code Issues Releases Activity
15,275 Commits 5 Branches 8 Tags 266 MiB
34d27dc854
Commit Graph

712 Commits

Author SHA1 Message Date
Vladimir Zidar
5d8274357d LP-413 This commit adds PIOS_COM_RegisterAvailableCallback() function. 2016-09-24 01:10:31 +02:00
Vladimir Zidar
87035d953c LP-412 Allow access to rx & tx callbacks through pios_com device API. 2016-09-24 01:07:01 +02:00
Laurent Lalanne
72aabd30fd LP-407 Pios_Sbus: Set quality to minimum after a failsafe 2016-09-16 19:45:23 +02:00
Lalanne Laurent
f182931c6b Merged in paul_jewell/librepilot/LP-330_fix_copyright_symbol (pull request #313) 
Changed (c) to (C) for consistency
 2016-09-04 12:44:17 +02:00
Corvus Corax
1af73aad8a fixed length type in pios/posix pios_com.c to size_t (was still uint16_t) 2016-09-02 21:28:23 +02:00
paul Jewell
0517258834 LP-330 Changed (c) to (C) for consistency 2016-08-31 19:47:40 +02:00
Philippe Renon
52a9aa37c8 Merged in mindnever/librepilot/LP-391_fix_Some_CC3D_ports_cause_a_boot_issue_and_re_init_to_defaults (pull request #307) 
LP-391 This fixes issue with negative size (-1) passing from PIOS_Board_configure_com() to PIOS_COM_Init().
 2016-08-30 09:56:53 +02:00
Vladimir Zidar
107aa2170e LP-391 This fixes issue with negative size (-1) passing from PIOS_Board_configure_com() to PIOS_COM_Init(). 2016-08-30 02:03:10 +02:00
Vladimir Zidar
b1f7f5e4bf LP-377 Implement handling of USB_CDC_REQ_SET_LINE_CODING control request for F4 and F1 targets. Removes UsbComBridgeSpeed from hwsettings object. Removes GCS combo boxes related to UsbComBridgeSpeed. Fixes few places where UsbComBridgeSpeed was used for DebugConsole speed config. 2016-08-30 01:22:57 +02:00
Philippe Renon
2ccabe27e7 Merged in alessiomorale/librepilot/LP-381_log_buffers (pull request #303) 
LP-381 - Adds circular buffer and run writes within a separate callback
 2016-08-28 18:47:40 +02:00
Alessio Morale
cba2184caf LP-381 - Adds circular buffer and run writes within a separate callback 2016-08-17 19:57:29 +02:00
Fredrik Arvidsson
226f8c4c3d Merged in f5soh/librepilot/LP-298_Ibus_support_Dronin (pull request #298) 
LP-298 IBus support dRonin
 2016-08-17 12:40:41 +02:00
Laurent Lalanne
e52d2636f0 LP-298 Use PIOS_IBUS_NUM_INPUTS like other inputs 2016-08-03 19:52:34 +02:00
Laurent Lalanne
5895468f08 LP-298 Port Ibus Input driver from dRonin - Not tested 2016-08-03 19:09:05 +02:00
Alessio Morale
e7f15e31d0 LP-369 - Fix cdc availability condition 2016-07-26 02:15:04 +02:00
Lalanne Laurent
2de896818e Merged in alessiomorale/librepilot/LP-361_notification_improvements (pull request #283) 
Lp 361_notification_improvements
 2016-07-21 20:05:54 +02:00
Alessio Morale
6b1f4e52be Merged in TheOtherCliff/librepilot/theothercliff/LP-340_AutoTune_fix_some_time_measurement_issues_in_original_code (pull request #282) 
LP-340 Autotune fix some time measurement issues in original code
 2016-07-21 19:53:33 +02:00
Alessio Morale
fa041ecf05 LP-361 - Don't lose notifications when more than an alarm is active 
, fix time between notifications condition, cleanup
 2016-07-17 17:13:09 +02:00
Brian Webb
586af77267 LP-190: Fixes an issue with uninitialized OPLink receiver channels. 2016-07-12 17:49:29 -07:00
Brian Webb
a65492b589 LP-190: Removes RFM22B register definitions from pios_rfm22b_priv.h and switches to using pios_rfm22b_regs.h. Alos addresses a few issues brought up in review. 2016-07-12 17:49:28 -07:00
Brian Webb
2e2bb1b20b LP-190: Removed rfm22breceiver UAVO. 2016-07-12 17:49:16 -07:00
Brian Webb
0738c8a78a LP-190: Final testing and bug fixes. 2016-07-12 17:47:16 -07:00
Brian Webb
91ea8966da LP-190: Addes support for OpenLRS receiver protocol to the OPLinkMini. Also updates the OPLink configuration to better support OpenLRS. 2016-07-12 17:47:16 -07:00
Brian Webb
aa21761f4c LP-190: Adds support for OpenLRS protocol to OPLinkMini 2016-07-12 17:47:16 -07:00
Brian Webb
021eb21008 LP-190: Moved openlrsstatus UAVO to OPLinkStatus 2016-07-12 17:46:15 -07:00
Brian Webb
a0279b272f LP-190: Initial checkin that adds OpenLRS receiver support to Revolution and OPLinkMini. 2016-07-12 17:45:33 -07:00
Cliff Geerdes
69f1964b12 LP-340 uncrustify 2016-07-12 14:48:11 -04:00
Cliff Geerdes
f2f8d8e712 LP-340 code changes 2016-07-12 14:48:11 -04:00
Cliff Geerdes
7553eb4f32 LP-340 Quick code with both timing fixes 2016-07-12 14:48:10 -04:00
Alessio Morale
6214c0ea30 Uncrustify 2016-07-03 17:10:46 +02:00
Alessio Morale
c9188fc5a2 Merged in TheOtherCliff/librepilot/theothercliff/LP-76_Port_Autotune_from_dRonin (pull request #198) 
Theothercliff/lp 76_port_autotune_from_dronin
 2016-07-03 16:09:30 +02:00
Alessio Morale
a2d2e81220 Merged in mindnever/librepilot/LP-342-pios_exti-improvement (pull request #266) 
Lp 342 pios_exti improvement
 2016-07-03 16:05:03 +02:00
Vladimir Zidar
27cc48b362 LP-343 Change return type from PIOS_COM_Available() to give extended status about RX and TX availability on given COM device. 2016-06-22 01:57:08 +02:00
Vladimir Zidar
4aebc7cc5e LP-342 Added EXTI_Init(DISABLE) to PIOS_EXTI_DeInit. 2016-06-22 00:32:56 +02:00
Vladimir Zidar
fabc3e8d69 LP-342 Simplify pios_exti configuration, allow dynamic configuration and reconfiguration. adds PIOS_EXTI_DeInit() 2016-06-22 00:32:47 +02:00
Cliff Geerdes
4240c8ea5c LP-76 implement new dRonin yaw calculation PR and fix a TL spelling error 2016-06-18 14:08:06 -04:00
Cliff Geerdes
aa06b1793f LP-76 update copyrights 2016-06-18 14:08:05 -04:00
Cliff Geerdes
fd22011bfa LP-76 get ready for PR uncrustify and comments 2016-06-18 14:08:05 -04:00
Cliff Geerdes
2105a49ca9 LP-76 add UAV defaults and remove UAV inits 2016-06-18 14:08:03 -04:00
Philippe Renon
be3be734b5 Merged in f5soh/librepilot/LP-326_16_PPM_Channels_support (pull request #256) 
LP-326 16 PPM channels support
 2016-06-08 21:59:08 +02:00
Vladimir Zidar
77a28f2066 LP-328 Moved i2c operation PIOS_HMC5x83_ReadMag() from _driver_fetch() to _driver_poll() so that fetch() always get good data 2016-06-02 14:34:38 +02:00
Vladimir Zidar
f27db8b65c LP-328 uncrustified 2016-06-02 12:47:31 +02:00
Vladimir Zidar
10637550d7 LP-328 hmc5x83 learns how to reinitialize after it gets reconnected to the bus 2016-06-02 12:44:45 +02:00
Laurent Lalanne
6f3bcf817e LP-326 Reduce minimal sync pulse lenght to 2700µs 2016-05-31 08:03:15 +02:00
Laurent Lalanne
2138516dfe LP-72 Various typo fixes - Set PPM input as default 2016-05-25 13:51:41 +02:00
Cliff Geerdes
0628949afd LP-72 uncrustify 2016-05-25 13:51:41 +02:00
Cliff Geerdes
fdc8b10ddf LP-72 use TauLabs USB IDs for Sparky2 so users can cross flash LP and TL without SBL. 2016-05-25 13:51:41 +02:00
Vladimir Zidar
2b760f9d39 LP-72 Fix MS5611 driver to allow booting with unpowered i2c devices hanging the bus 2016-05-25 13:51:41 +02:00
Vladimir Zidar
05d6d983ae LP-72 Fix for f2aa171 that broke revonano build - stm32f411 has no TIM8 2016-05-25 13:51:41 +02:00
Vladimir Zidar
1d3d784f8b LP-72 Fixes PPM input on receiver port. Added extra interrupt channel init for TIM1 & TIM8. Removed TIM8_UP_IRQHandler, as there is no such irq in stm32f4 line. 2016-05-25 13:51:40 +02:00
Laurent Lalanne
afb32d3090 LP-72 Uncrustify after rebase 2016-05-25 13:51:40 +02:00
Cliff Geerdes
2e65449dcc LP-72 rename revolution.cpp rename revo defines rename revo comments 2016-05-25 13:51:38 +02:00
Cliff Geerdes
9bb95e3a84 LP-72 initial sparky2 support needs GCS, 9250 orientation, testing 2016-05-25 13:51:34 +02:00
James Duley
5e02fb2da7 simposix don't #define false in c++ 2016-05-20 21:30:53 +01:00
Alessio Morale
5156c0c911 LP-304 - Allow further info to be added to PERF_INIT_COUNTER for future feature support. 
This may allow in future to extract the counters id list with grep to be handled by gcs or other custom tools
Proposed usage:
PERF_INIT_COUNTER(counterVariable, id, "MODULE NAME","COUNTER DESCRIPTION","UNIT OF MEASURE");
i.e.:
PERF_INIT_COUNTER(counterExecutionTime, 0xAC700001, "ACTUATOR", "Actuator update execution time", "uS");
 2016-05-03 00:07:35 +02:00
Alessio Morale
1b254e4182 LP-304 - Prevent errors when dealing with variables used only for instrumentation 2016-05-03 00:07:10 +02:00
Alessio Morale
bf639b486d LP-304 - declare counters as static 2016-05-03 00:06:24 +02:00
Laurent Lalanne
c9fff7e16e LP-151 OPLink: Allow custom Device ID or auto generated. 2016-05-01 21:56:50 +02:00
Vladimir Zidar
30e7e1f4e6 LP-281 use correct operator 2016-04-07 01:00:42 +02:00
Vladimir Zidar
8c1b008da1 LP-268 Uncrustified. 2016-03-28 16:03:16 +02:00
Vladimir Zidar
4159449021 LP-268 This adds TX and RX data rates to OPLinkStatus UAVO and fixes small issue in rfm22b driver with rx_seq not being updated. 2016-03-28 16:02:28 +02:00
Laurent Lalanne
593cf7bc61 Typo PIOS_RFM22B_GetPairStats() 2016-03-12 17:56:05 +01:00
Alessio Morale
089c224514 Merged in alessiomorale/librepilot/amorale/LP-96_cpu_idle_counter (pull request #37) 
LP-96 Updated CPU idle counter / LP-97 unify CopterControl and Revolution init process
 2016-02-19 20:19:05 +01:00
Lalanne Laurent
48a76dd139 Merged in TheOtherCliff/librepilot/theothercliff/LP-83_Bricking_of_Revo_and_Sparky2 (pull request #142) 
LP-83 Unbrick Revo and Sparky2
 2016-02-16 19:13:57 +01:00
Fredrik Arvidsson
9e53b35fdc LP-104 LP-196 Signal quality implementation for Graupner HoTT. Uncrustification of flight code. 2016-01-25 00:42:54 +01:00
Fredrik Arvidsson
ffa671da78 LP-196 Adding signal quality calculation to Ex.Bus receiver module. 2016-01-25 00:23:31 +01:00
Fredrik Arvidsson
e17d809120 Merge branch 'next' into thread/LP-104_LP-196_HoTT_and_Ex.Bus_Support 2016-01-24 21:11:35 +01:00
Laurent Lalanne
a0d7af7f55 LP-215 Set correct failsafe values if PPM stream fails. 2016-01-24 16:15:15 +01:00
Laurent Lalanne
db83d1860e LP-209 Update Rssi and LinkQuality values - Set Connected/Disconnected state in both sides - Add checkTimeOut() 2016-01-24 16:15:14 +01:00
Fredrik Arvidsson
0d660d33ad LP-104 LP-196 Changes to address review comments and then uncrustification. 2016-01-16 12:19:34 +01:00
Fredrik Arvidsson
c06fb0249f LP-104 LP-196 Uncrustify and some other formatting issues fixed. 2016-01-10 10:12:54 +01:00
Fredrik Arvidsson
d32cc0e7fb Merge branch 'thread/LP-104_LP-196_HoTT_and_Ex.Bus_Support_15.09' into thread/LP-104_LP-196_HoTT_and_Ex.Bus_Support 2016-01-09 19:18:48 +01:00
Fredrik Arvidsson
02c981388a Merge branch 'thread/LP-196_Jeti_Ex_Bus_15.09' into thread/LP-104_LP-196_HoTT_and_Ex.Bus_Support_15.09 
# Conflicts:
#	flight/targets/boards/coptercontrol/board_hw_defs.c
#	flight/targets/boards/coptercontrol/firmware/pios_board.c
#	flight/targets/boards/revolution/board_hw_defs.c
#	flight/targets/boards/revolution/firmware/inc/pios_config.h
#	flight/targets/boards/revolution/firmware/pios_board.c
#	flight/targets/boards/revonano/firmware/inc/pios_config.h
#	flight/targets/boards/revonano/firmware/pios_board.c
#	shared/uavobjectdefinition/hwsettings.xml
#	shared/uavobjectdefinition/manualcontrolsettings.xml
#	shared/uavobjectdefinition/receiveractivity.xml
 2016-01-09 16:59:24 +01:00
Lalanne Laurent
8fe6ba2e2e Merged in f5soh/librepilot/LP-198_Detect_ppm_signal_lost (pull request #139) 
LP-198 Detect ppm signal lost
 2016-01-09 12:56:51 +01:00
Fredrik Arvidsson
c8edd023a2 LP-196 Cleaned up some code. 2016-01-06 17:16:02 +01:00
Fredrik Arvidsson
534ff1ff3c LP-196 Added Auto-Baud-Rate code. Will toggle between high (125 KBaud) and low (250 KBaud) baud rate every EXBUS_BAUD_RATE_LIMIT (set to 64 right now). 
Cleaned out some unused variables.
 2016-01-05 14:03:15 +01:00
Philippe Renon
6b39fc0800 uncrustify 2016-01-04 21:41:45 +01:00
unknown
d00c169dbb LP-196 Fixed bug in Ex.Bus decoder and changed baud rate for UART to 125 kbaud. 2016-01-03 18:27:14 +01:00
Fredrik Arvidsson
3e920bc5bc LP-196 Added driver for Jeti EX.Bus protocol. Added support for CopterControl target on Main and Flexi port. This is WIP and not tested yet. 2015-12-26 12:29:04 +01:00
Fredrik Arvidsson
e6d4638201 LP-104 Adds support for Graupner HoTT SUMD/SUMH serial protocol used by receivers on Main and Flexi port. 
Still work in progress. Only supports CopterControl target and crashes on input :(
 2015-12-20 11:08:15 +01:00
Laurent Lalanne
aff3f4bd3a LP-198 Detect PPM signal lost for stm32f4xx familly 2015-12-18 15:12:44 +01:00
Ákos Máté
f2867fbba1 Workaround for the turnigy 9x stock receiver with PPM encoder. 
LP-198 The receiver holds the last value on channel 4 and 5, when no signal.
Without the workaround, CC3D can not detect the loss of signal.
 2015-12-18 15:09:25 +01:00
Cliff Geerdes
c65702b1d3 LP-83 fix two known bricking scenarios 2015-12-16 01:46:59 -05:00
Alessio Morale
ff335072d0 Merged in paul_jewell/librepilot/LP-119_fix_pios_msheap (pull request #58) 
Changed incorrect #if to #ifdef in pios_msheap.c
 2015-12-13 19:11:46 +01:00
Alessio Morale
48653de561 Merged in physicsboy0709/librepilot/add_stm32f427family_support (pull request #91) 
LP-149 Add STM32F427/429/437/439 chip support, preparation for brand new board. and minor fixes
 2015-12-13 19:11:25 +01:00
Alessio Morale
70faa04b0a LP-97 - Move board init function declarations to a pios_board_init.h, fix some headers 2015-11-08 18:47:31 +01:00
Cliff Geerdes
e0a805518f LP-73 uncrustify 2015-10-25 23:59:52 -04:00
Cliff Geerdes
5cb042e703 LP-73 fw_gpsplatinum build 2015-10-24 14:57:12 -04:00
Cliff Geerdes
afc96267d3 LP-73 use simple timed DataAvailable 2015-10-24 12:23:12 -04:00
Cliff Geerdes
7de55812dd LP-73 changes for pull request comments 2015-10-24 12:09:22 -04:00
Cliff Geerdes
d9b7a0bb00 LP-73 port extmag to all other boards 2015-10-24 12:09:21 -04:00
Cliff Geerdes
b086d1a021 LP-73 ExtMag fix some more watchdog issues 2015-10-24 12:09:20 -04:00
Cliff Geerdes
d4b0d106f8 LP-73 External Mags on I2C initial coding 2015-10-24 12:09:19 -04:00
Tianhe Wang
033180b986 pios_msheap.c edited online with Bitbucket 
revert this file, there is already another pull request.
 2015-10-13 13:13:11 +00:00
physicsboy0709
1807c5c27e modified: flight/pios/common/libraries/msheap/pios_msheap.c 
modified:   flight/pios/stm32f4xx/library.mk
	new file:   flight/pios/stm32f4xx/link_STM32F4xx_RQ_bl_memory.ld
	new file:   flight/pios/stm32f4xx/link_STM32F4xx_RQ_fw_memory.ld
	new file:   flight/pios/stm32f4xx/link_STM32F4xx_RQ_sections.ld
	new file:   flight/pios/stm32f4xx/link_STM32F4xx_RQ_sections_compat.ld
	modified:   flight/pios/stm32f4xx/pios_bl_helper.c
	modified:   flight/pios/stm32f4xx/pios_flash_internal.c
	modified:   flight/pios/stm32f4xx/pios_sys.c
 2015-10-12 14:38:30 -04:00
Paul Jewell
5517ff322e Changed incorrect #if to #ifdef in pios_msheap.c 2015-09-13 12:39:03 +01:00
Alessio Morale
4c2557c29a LP-96 - remove unused files 2015-09-03 23:40:35 +02:00
Alessio Morale
b88681c69f LP-97 - Move the common Init process within the System module (coptercontrol/revolution) 2015-09-03 23:40:24 +02:00
Alessio Morale
3eaf1ef3c3 LP-96 - Implement CPU idle counters and calibration functions 2015-09-03 20:05:25 +02:00
Alessio Morale
a5482a5c2b LP-108 - Fix Temp calculation, get rid of floatin point operations within ISR 2015-09-01 23:32:26 +02:00
Roy Bekken
ad84547637 Update all changed files against GIT log with copyright headers consistency. 2015-08-19 16:15:58 +02:00
a*morale
a66a725fcb Merge pull request #38 from skarlsso/skarlsso/LP-37_memory_wasted_in_pvPortMallocGeneric 
LP-37 Fix alignment bug in in pvPortMallocGeneric
 2015-07-19 14:09:06 +02:00
Stefan Karlsson
d57e838ab1 LP-37 Fix alignment bug in in pvPortMallocGeneric 
The allocation size was incremented by 'alignment' bytes when
'xWantedSize' was 'alignment' aligned, but not 'portBYTE_ALIGNMENT'
aligned.
 2015-07-17 17:04:18 +02:00
a*morale
dd6c6054e9 Revert "OP-1810 FOC" 
This reverts commit 92e50c2ead.

Conflicts:
	Makefile
	ground/openpilotgcs/src/plugins/config/config.pro
	ground/openpilotgcs/src/plugins/config/configgadgetwidget.cpp
	ground/openpilotgcs/src/plugins/config/configoutputwidget.cpp
	ground/openpilotgcs/src/plugins/setupwizard/pages/escpage.cpp
	ground/openpilotgcs/src/plugins/setupwizard/resources/connection-diagrams.svg
	ground/openpilotgcs/src/plugins/uavobjectutil/devicedescriptorstruct.h
 2015-07-15 00:07:50 +02:00
Alessio Morale
4568588447 REVONANO - remove unused file 2015-06-01 19:07:42 +02:00
Alessio Morale
508d55c9a6 REVONANO - Fix MPU9k Reset 2015-06-01 18:54:14 +02:00
Alessio Morale
79b9caaf6e Revert "REVONANO - Workaround for the SBUS issue (use oversample 8 instead of 16 to reduce the bitrate error)" 
This reverts commit 109c21a8ab.
 2015-05-28 02:16:08 +02:00
abeck70
66643f185e REVONANO uncrustify pios_usart 2015-05-21 22:18:36 +10:00
Alessio Morale
1ce23d722c REVONANO - Raise the number of leds supported to 10, added limits 2015-05-18 21:30:05 +02:00
Alessio Morale
295ca38026 REVONANO - Fix Prescaler settings for APB1 and 2 (48MHz and 96MHz) 2015-05-18 21:30:04 +02:00
Werner Backes
25b5278b05 Corrected mpu9250 magnetometer axis orientation. 2015-05-18 21:30:04 +02:00
Alessio Morale
109c21a8ab REVONANO - Workaround for the SBUS issue (use oversample 8 instead of 16 to reduce the bitrate error) 2015-05-18 21:30:04 +02:00
Alessio Morale
0d714fb861 REVONANO - Change Power Regulatro Scale mode to Scale1. 
Looks like stm32f4xx_Clock_Configuration_V1.1.0 seems like doesn't play well with 411. Reg Scale mode was wrong
 2015-05-18 21:30:03 +02:00
Alessio Morale
15a5022c7e Raise callbackscheduler stack size 2015-05-18 21:30:03 +02:00
Alessio Morale
855361488a REVONANO - emulate bigger sector size for erase operations 2015-05-18 21:30:02 +02:00
Alessio Morale
5ca6e43070 REVONANO - Fix erase settings 2015-05-18 21:30:02 +02:00
Alessio Morale
2497b3d605 REVONANO - some cleanup 2015-05-18 21:30:02 +02:00
Alessio Morale
895540974a REVONANO - Disable Sensitivity Adjustment values. 2015-05-18 21:30:01 +02:00
Alessio Morale
43f04a340b OP-1658 - MPU9250 support for sensor "reset", fix temperature measurement 2015-05-18 21:30:01 +02:00
Alessio Morale
174340d8bf OP-1658 - Various fixes for MPU9250 2015-05-18 21:30:01 +02:00
Alessio Morale
928f1385ec OP-1658 - MPU9250 sensor device model implementation 2015-05-18 21:30:00 +02:00
Laurent Lalanne
f82a584eb2 REVONANO mpu9250 driver fix for Mag orientation 2015-05-18 21:29:57 +02:00
Alessio Morale
1d7c1b2fc9 REVONANO - Change target to 411, fix ram and flash extents, raise clock to 96MHz (cannot do 100 because of USB) , cleanup spl 2015-05-18 21:29:57 +02:00
Alessio Morale
15e7286078 MPU9K - merge 9k and 6k settings into a single uavo 2015-05-18 21:29:56 +02:00
Alessio Morale
3563b1ff0e REVONANO - Prevent modules to start before init: move most code to pios_initcall.h. System and system-Like modules 2015-05-18 21:29:56 +02:00
Stefan Karlsson
efb6855f6f REVONANO - Various temp fixes debug code to get nano to read from the flash. Code has been added to make the execution of systemTask wait until initTask has completed. 
Conflicts:
	flight/pios/common/pios_flashfs_objlist.c
 2015-05-18 21:29:56 +02:00
Alessio Morale
288c9019d1 uncrustify 2015-05-18 21:29:55 +02:00
Alessio Morale
51094ba95d REVONANO - Minor cleanup of MPU9250 driver 2015-05-18 21:29:55 +02:00
Alessio Morale
d2dae79c82 REVONANO - update SPL to 1.4.0 that adds support for f411 2015-05-18 21:29:55 +02:00
Mathieu Rondonneau
66b06e4c9a REVONANO - Add MPU9250 support 2015-05-18 21:29:42 +02:00
Alessio Morale
fb11b312c5 REVONANO - Flash fs fixes 2015-05-18 21:26:40 +02:00
Alessio Morale
632a14023c REVONANO - exclude ccram stuffs 2015-05-18 18:55:26 +02:00
Alessio Morale
5c13551a1a REVONANO - Add support for eeprom and objlist fs 2015-05-18 18:55:25 +02:00
Alessio Morale
8b11861c63 REVONANO - Readd old objlist FS to be used with EEPROM 2015-05-18 18:55:25 +02:00
Alessio Morale
1e1195ec05 REVONANO - Add Eeprom support 2015-05-18 18:55:25 +02:00
Alessio Morale
764a15999f REVONANO - Make FlashFS_Logfs optional, remove old onchip eeprom files 
Conflicts:
	flight/targets/boards/coptercontrol/firmware/Makefile
 2015-05-18 18:55:21 +02:00
Alessio Morale
76ad80fdf5 Revert "objlist: remove now unused objlist flash filesystem" 
Bring them back to the right path
This reverts commit d89a9b1b6c.
 2015-05-18 18:54:52 +02:00
Alessio Morale
805750050c REVONANO - Support distinct remaps for SDA and SCL 2015-05-18 18:54:52 +02:00
Alessio Morale
375f23ff0c REVONANO - Make debuglog, FlashFS and other bits optional 2015-05-18 18:54:50 +02:00
Alessio Morale
690e04f4f0 REVONANO - Initial board support 2015-05-18 18:52:09 +02:00
Alessio Morale
6d6be75605 REVONANO - Update SPL to 1.3.0 2015-05-18 18:48:18 +02:00
Alessio Morale
b59408863a REVONANO - Allows per board linker scripts 2015-05-18 18:48:17 +02:00
abeck70
2c3fcd64d1 Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into laurent/OP-1869_Analog_airspeed_scaling 2015-05-14 20:21:40 +10:00
Laurent Lalanne
8e8d08c4a1 OP-1869 "scale" lower case 2015-05-13 21:55:18 +02:00
Steve Evans
1771d347bb Merge branch 'steve/OP-1803_s.bus_dropped_frames' into steve/OP-1849_flexio_com_bridge 2015-05-13 20:36:06 +01:00
Steve Evans
fd00cd8210 Merge branch 'next' into steve/OP-1803_s.bus_dropped_frames 2015-05-13 20:29:54 +01:00
abeck70
92e50c2ead OP-1810 FOC 
Squashed commit for clean commit as discussed in code review
Uncrustify
 2015-05-13 17:19:51 +10:00
Steve Evans
6e6b8c8bad Merge branch 'steve/OP-1803_s.bus_dropped_frames' into steve/OP-1849_flexio_com_bridge 2015-05-08 07:43:16 +01:00
Steve Evans
023f157ba8 OP-1803 Disable untested DSM link quality code 2015-05-08 07:42:32 +01:00
Laurent Lalanne
11e83bd0e8 OP-1869 Analog Airspeed sensor : Allow scale (voltage divider), change alpha/LowPassFilter behavior 2015-05-01 13:00:36 +02:00