Brian Webb
4e68f6543e
Added tracking of dropped packets to PipX and turned off visible text on signal strength meters.
2012-06-04 21:18:13 -07:00
Brian Webb
25fe50e9b1
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-06-04 18:26:05 -07:00
James Cotton
ff0a3a156e
Merge remote-tracking branch 'origin/os/AeroSimRC' into next
2012-06-04 12:25:59 -05:00
James Cotton
46a52fc5ce
Apply the virtual flybar stick scaling in stabilization.c because we need to
...
know the true stick position to dampen the gyros appropriately.
2012-06-04 12:22:39 -05:00
James Cotton
bda3f301cb
Rename VBar mode to VirtualBar
2012-06-04 12:22:39 -05:00
James Cotton
4c562b88d1
Make the amount to suppress the gyros adjustable instead of binary
2012-06-04 12:22:39 -05:00
James Cotton
59972d5570
Limit the number of degrees the vbar can deflect. This is good for fast flips
...
etc.
2012-06-04 12:22:39 -05:00
James Cotton
42ac4018b8
Woops. Fix really nasty bug in vbar mode I introduced. Also fix small bug in
...
scoping of gyro gain that made it not work.
2012-06-04 12:22:39 -05:00
James Cotton
6719ee8639
Add piro compensation option to the vbar mode
2012-06-04 12:22:39 -05:00
James Cotton
3283b99d4e
For hardcode flipping allow full stick to completely override the gyro
...
feedback.
2012-06-04 12:22:39 -05:00
James Cotton
fe978504bc
Add friendly settings for the vbar mode including the VbarTau which acts like
...
the time constant.
2012-06-04 12:22:39 -05:00
James Cotton
ff1b1a93cf
Implement a virtual flybar in a way inspired by behavior of Align 3G which
...
seems apply a leaky integrator to the swash angle. This is the similar to what
is done by Phubar (http://code.google.com/p/phubar/ ) as well although we refer
to the gyro term as the proportional and the flybar angle as the integral
2012-06-04 12:22:38 -05:00
James Cotton
1b55df733d
Create virtual flybar setting for stabilization modes
2012-06-04 12:22:38 -05:00
James Cotton
e341a37bd1
Need to add a small delay after save for the load to work correctly. Odd.
2012-06-03 17:26:10 -05:00
Brian Webb
36f62be3b9
Fixed packet error detection and improved RSSI reading.
2012-06-03 10:07:08 -07:00
James Cotton
e8cf606f16
Add the chip size to the flashfs configuration (should probably go in the chip
...
configuration)
2012-06-02 11:00:42 -05:00
James Cotton
25f85ee4fe
Add an error flag to ObjectPersistence and when saving a setting make it verify
...
that the data reads successfully.
2012-06-02 10:23:27 -05:00
Brian Webb
df8a5f8f27
Changed update period for PPM inputs on the PipX. Fixed LED code.
2012-05-31 18:56:07 -07:00
Brian Webb
7287e2f725
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-05-29 18:14:20 -07:00
Oleg Semyonov
b93674cf64
uavtalk: fix object access mode comments to be correct
2012-05-29 11:57:31 +03:00
Brian Webb
9a6fb60dd6
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-05-28 20:18:59 -07:00
Oleg Semyonov
5739dfbfc8
Merge remote-tracking branch 'origin/next' into os/aerosimrc
...
Conflicts:
shared/uavobjectdefinition/gcsreceiver.xml
2012-05-28 21:46:43 +03:00
Oleg Semyonov
910b465ac6
AeroSimRC: do not update sensor and/or attitude data if read-only flag is set
2012-05-28 19:44:34 +03:00
Oleg Semyonov
f95d29a3b8
TxPID: add GyroTau to the list of parameters (OP-637)
2012-05-28 12:48:55 +03:00
James Cotton
5a6e02a688
Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into next
2012-05-25 20:37:23 -05:00
Brian Webb
b824c87056
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-05-25 06:26:29 -07:00
Brian Webb
701a480f01
Tuning configutation of PipX.
2012-05-24 18:08:29 -07:00
Brian Webb
f48bb90cf6
Updated PipX bootloader USB configuration to match CC.
2012-05-24 18:06:19 -07:00
Brian Webb
a434688b42
Zero out watchdog register on init.
2012-05-24 18:04:42 -07:00
Stacey Sheldon
ac75dd7be1
Revert "bu: remove LED support from bootloader updaters"
...
This reverts commit 7f03a77492
2012-05-23 00:46:19 -04:00
Stacey Sheldon
400e529703
bu: add back LED feedback
...
LED support was dropped from the BU images due to a lack
of proper abstraction for LED definitions between CC and
CC3D HW variants in the CopterControl board family.
Use the new LED abstraction to hide board revision details
from the BU image so it can once again flash some LEDs.
2012-05-23 00:31:08 -04:00
Stacey Sheldon
56dddee56c
cc: use defines for board revisions instead of hard-coded numbers
2012-05-23 00:29:12 -04:00
Stacey Sheldon
d2615cac96
hw_defs: hide board-rev differences in LED definitions
...
Every board has at least one LED (HEARTBEAT). Not all
users of LEDs need to be directly aware of which LED
configuration to choose when there may be more than one
possible configuration.
Hide the details of the differences between LEDs used in the
different HW revs for CC. This will allow generic code to
run on CC and CC3D without being exposed to the details of
the different pins used for the LEDs.
2012-05-23 00:22:11 -04:00
Stacey Sheldon
b97aba834a
cc3d leds: move pin remapping into led definition
...
The LED driver supports GPIO remapping. No need to
do the remapping outside of the LED definition.
2012-05-23 00:12:51 -04:00
Stacey Sheldon
dff43d5156
board_info: add guard for multiple includes of .h file
2012-05-22 21:50:53 -04:00
Corvus Corax
64c1ac3bd6
Stabilization: Bugfix: moved queue initialisation to TaskStart where it belongs
2012-05-22 22:19:31 +02:00
Corvus Corax
7f334a9773
SimPosix: make use of compile time uavobjecto initialization function generation
2012-05-22 22:06:26 +02:00
Corvus Corax
31da29a24b
Reenabled full UAVObject initialization for SimPosix
2012-05-22 21:22:59 +02:00
Corvus Corax
3e5741abea
SimPosix: Remove unneeded modules from Makefile to allow test run
2012-05-22 18:45:23 +02:00
Corvus Corax
9aca773714
SimPosix: Reenabled File IO for UAVObject saving
2012-05-22 18:32:52 +02:00
Corvus Corax
0d23e78762
PiOS.posix: added missing header definition to use FreeRTOS tasks in udp driver if applicable
2012-05-22 18:32:47 +02:00
Corvus Corax
e16a42b672
SimPosix: Fixed Module Initialisation, added missing UAVObject Initialisations (cause segfaults if not initialised)
2012-05-22 18:32:41 +02:00
Corvus Corax
5727d5714e
Created new "SimPosix" board and ported PiOS.posix to revolution API and more "standard like" configuration akin to other "boards"
2012-05-22 18:32:27 +02:00
Corvus Corax
414310fcba
test add of SimPosix architecture - doesnt work yet
2012-05-22 18:28:42 +02:00
Brian Webb
8b98d48fc4
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-05-22 06:27:45 -07:00
Stacey Sheldon
3b0508e753
bu: check compatibility btw BL and HW before installing
...
CC and CC3D boards share the same FW image. This is accomplished
by checking the BOARD_REVISION field in the board_info_blob
that is stored in the BL partition in flash as we init the FW.
Make sure that the BU image only writes a BL image that has
the same BOARD_TYPE and BOARD_REVISION fields in the embedded
image as the ones currently in flash on the board.
This ensures that we never write a CC3D BL image onto a CC board
and vice versa. This check should prevent "bricking" a board.
2012-05-22 00:33:40 -04:00
Stacey Sheldon
e063bb0490
bl: use new USB "cable connected" API to halt in BL
...
BL only cares about the physical cable being connected.
Use the newly provided API that matches this intent.
2012-05-22 00:24:16 -04:00
Stacey Sheldon
dab400c80d
usb: decouple "available" from "cable connected"
...
The bootloader needs to understand whether the USB cable
is connected. The HID and CDC drivers need to know if
the cable is connected _and_ the device has been enumerated
already. Separate these two concepts in the API.
Combining these was resulting in the BL not properly
detecting that the cable was plugged in, and trying to boot
the firmware image immediately. This effectively bricked
the board if you ever had an invalid firmware image.
It also happens to be the case that the BU images automatically
invalidate themselves after updating the BL so they don't run
again. The cable detect bug + this intended behaviour of the
BU image resulted in a bricked board after upgrading the BL.
2012-05-22 00:21:24 -04:00
Brian Webb
6e359c5933
Added PipX to Windows .inf file and updated ppm port definitions.
2012-05-21 19:22:46 -07:00
Brian Webb
e57543ec29
Updated USB on PipX to latest CDC changes.
2012-05-20 19:34:43 -07:00
