rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-03 11:24:10 +01:00
Code Issues Releases Activity
4,502 Commits 5 Branches 8 Tags 266 MiB
5ee9c8008e
Commit Graph

4502 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Oleg Semyonov
2020e336d6 OP-290: allow GCS tabs to shrink (by eliding the text), less limit min window width 2011-08-16 20:58:39 +03:00
James Cotton
c0ead372e1 INS: Change LED flashing to indicate connected. 2011-08-16 11:30:38 -05:00
James Cotton
71a1cdff62 PiOS SPI: For F2 need to have the same receive and transmit length when using 
CRC.  This wasn't the case on F1.  With CRC the last byte of the buffer passed
to PIOS_SPI_TransferBlock is NOT USED.  This is the case on both F1 and F2.

Also need to DeInit DMA before enabling or it doesn't enable successfully.

Finally added a timeout which sets a fail on the pios spi transfer in the case
that either of the dma channels fails to enable.
 2011-08-16 11:29:15 -05:00
zedamota
6a103ed332 Integrated artwork into the input config wizard. Some testing left to do before sending for review. 2011-08-16 16:06:18 +01:00
James Cotton
bcca705750 Disable beta hardware bmp085 driver until it's updated. Not necessary anyway 
since on the INS.
 2011-08-16 08:55:02 -05:00
James Cotton
33e61b4405 OP-557: Make the tools erase menu item attempt to perform a full format on the 
flash chip first, then fall back to erasing settings via the EraseSettings
object persistence.  The later only removes UAVO instances that the firmware is
current aware of, so can create issues when jumping between versions.
 2011-08-15 11:37:00 -05:00
James Cotton
35eef66bfe OP-557: Add a UAVO access method to erase the entire flash chip. Normally not 
needed by users because if too much changes I change the FS magic and trigger a
wipe.

Possibly the erase should require a particular "magic" object id value to
execute?  This would make it harder to do manually through UAVOs though.
 2011-08-15 10:33:27 -05:00
zedamota
98f84e472b Trying to get out of merge hell 2011-08-15 14:12:54 +01:00
James Cotton
db9c73db45 Get SPI closer to working. The flags in the pios_config should match the 
stream number, not channel number.  Also DeInit DMA section in the init process
which makes debugging and init behavior more reliable.
 2011-08-15 04:47:53 -05:00
James Cotton
86b652bbab Merge branch 'next' into camera_stabilization 2011-08-14 18:07:57 -05:00
zedamota
e736b17cc4 Merge remote-tracking branch 'remotes/origin/next' into GCS_ChangesToUI-RuntimeCFG 
Conflicts:
	ground/openpilotgcs/src/plugins/config/config_cc_hw_widget.cpp
	ground/openpilotgcs/src/plugins/config/configgadgetwidget.h
	ground/openpilotgcs/src/plugins/config/configstabilizationwidget.cpp
 2011-08-14 15:48:16 +01:00
Oleg Semyonov
2f7f920ef3 gcs: (uploader plugin) few firmware info string and icon changes 
Also it looks like the date check clause doesn't work, needs to be checked.
 2011-08-14 17:25:52 +03:00
Oleg Semyonov
ba58ec7e08 gcs: (uploader plugin) replace red warning icon with less serious yellow triangle 2011-08-14 17:25:50 +03:00
Corvus Corax
b75653a226 PiOS.posix: small corrections and bugfixes to make pios_com_udp work correctly. Telemetry works now. 2011-08-14 14:21:54 +02:00
Corvus Corax
5b240a2675 PiOS.posix: port pios_udp and pios_com to "next" 2011-08-14 14:21:54 +02:00
Corvus Corax
8a47ade16b flight/Libraries/fifo_buffer: Use platform independent <stdint.h> instead of "stm32xxx.h" to get definition of intX_t types 2011-08-14 14:21:54 +02:00
James Cotton
c5ed82086d Configure the interrupt information before enabling. Still looping in IRQ so 
configuration needs work.
 2011-08-14 02:00:52 -05:00
James Cotton
02d5e27e93 Got SPI IRQ from mainboard firing 2011-08-14 01:44:44 -05:00
James Cotton
80c2d45d93 Fix the BMP085 interrupt handler and get it producing data. Driver needs some 
work to abstract away the actual calculation of altitude from pressure and
temperature.
 2011-08-13 20:49:07 -05:00
James Cotton
f766ba47aa Increase the size of the eventdispatcher task and lower the maximum queue size. 2011-08-13 19:21:58 -05:00
James Cotton
a2b76adc33 Attitude: Do not start attitude estimation until accel data appears. This 
fixes the NaN when AttitudeSettings not available.
 2011-08-13 18:53:42 -05:00
James Cotton
ca413415a0 Code to make openocd 0.5.0 work. I'll keep this branch rebased on next. 2011-08-13 18:03:49 -05:00
James Cotton
62f51fc92d Some improvements to the HMC5883 driver. Still getting funny values but I 
suspect the chip at this point.
 2011-08-13 11:20:32 -05:00
James Cotton
13e5f4123a Reading gyro registers directly working. 2011-08-13 08:33:46 -05:00
James Cotton
e7990f5d43 Got a hint of some data with this code :) 2011-08-13 07:13:43 -05:00
James Cotton
f82e5dde33 Fix the EXTI IRQ handlers 2011-08-13 07:13:21 -05:00
James Cotton
e1f7a5003d Fix up SPI DMA streams 2011-08-13 04:54:19 -05:00
James Cotton
8929e2f359 Update some of the DMA settings 2011-08-13 02:46:13 -05:00
James Cotton
77cca9ba30 Move EXTI handlers into other drivers 2011-08-13 01:29:17 -05:00
James Cotton
6d018c046e Get BMA180 working. Need to move exti stuff into it until pios_exti 
implemented properly
 2011-08-13 01:10:33 -05:00
James Cotton
5619e33292 Bootloader now jumps to functioning code for INS. Consistent with AHRS code. 2011-08-12 22:52:47 -05:00
James Cotton
e9ca5c15f9 UPGRADE OPENOCD!!!! 
To support the F2 and F1 you must upgrade to OpenOCD 5.0
 2011-08-12 21:39:29 -05:00
James Cotton
6529b8360f Trying to get linker system working for INS 2011-08-12 21:28:02 -05:00
dankers
69f8aac967 Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next 2011-08-13 06:12:08 +10:00
dankers
65cb05e212 hhrhhr's fix for modelview gimbal lock, thank you!! 2011-08-13 06:08:07 +10:00
James Cotton
e993fae463 Fix bootloader 2011-08-12 04:32:02 -05:00
James Cotton
e57f774bb8 F2 INS compiles now 2011-08-12 04:30:14 -05:00
James Cotton
1d1f351233 Pios Delay: Add function for measuring time difference between two cycle counts 2011-08-12 04:29:53 -05:00
James Cotton
b3b4fcd007 Fix linker script and get rid of dead code 2011-08-12 03:44:55 -05:00
James Cotton
f247112090 PiOS F2: Move IMU3000 to device dependent :(. Now they all are. Need to 
abstract as much as possible out since init is almost identicalc and protocol
COULD be device independent.
 2011-08-12 03:38:45 -05:00
James Cotton
8c1dd7b929 Make BMP085 driver device dependent and update to new driver style. 2011-08-12 03:38:45 -05:00
James Cotton
9d76efa2aa Move BMA180 driver to common architecture style. 2011-08-12 03:38:45 -05:00
James Cotton
1dc08e5cf7 F2 PiOS: Small fix to hmc5883 driver 2011-08-12 03:38:44 -05:00
James Cotton
ba413d5dad F2 StdPeriph: Make the StdPeriph take in config parameters as const. 
Unfortunately they don't do this upstream :(
 2011-08-12 03:38:40 -05:00
James Cotton
ef0cdae622 PiOS F2: Remove clock initialization from usart since it is in pios_sys.c 2011-08-12 02:28:02 -05:00
James Cotton
6310f46705 HMC5883: Update driver for F2. Move to STM32F2xx directory since it is device 
dependent.  Abstract configuration out of board.h file into a standard board.c
structure.
 2011-08-12 02:26:51 -05:00
James Cotton
784c7b2646 Merge branch 'next' into ins 2011-08-11 21:52:10 -05:00
James Cotton
ec4e23aff9 Camera Stabilization: Bound outputs to [-1,1] although this should be redundant 
with checks in actuator.
 2011-08-11 14:34:38 -05:00
James Cotton
98346186e3 The camera desired object can now be a single instance. I think it will be a 
while before we have multiple cameras :) although it's easy to extend when we
do.
 2011-08-11 14:07:24 -05:00
James Cotton
923e33195b Merge branch 'next' into camera_stabilization 2011-08-11 12:06:50 -05:00