rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-03 11:24:10 +01:00
Code Issues Releases Activity
8,392 Commits 5 Branches 8 Tags 266 MiB
66b1d285d5
Commit Graph

1265 Commits

Author SHA1 Message Date
Brian Webb
1513413795 Added 56k data rate mode to rfm22 driver. 2013-03-18 04:30:11 +01:00
Brian Webb
9986b58f9b RFM22B/RM: Tweaked some PPM parameters to make PPM more stable on OPLink/RM. 
Conflicts:
	flight/PiOS/Common/pios_rfm22b.c
 2013-03-10 11:43:33 -07:00
Brian Webb
08021799ee RFM22B: Some style cleanup, and turned off status messages from coordinator. 2013-03-10 16:08:39 +01:00
Brian Webb
27c87e4b89 RFM22B: Fixed OPLink receiver output on RM. 2013-03-09 16:12:00 +00:00
Brian Webb
031b0073b1 RFM22B: Possible fix for the failure to connect at times. 2013-03-09 02:27:58 +00:00
Brian Webb
e70f0f2c21 Merge remote-tracking branch 'origin/next' into brian/rfm22_FHSS 2013-03-09 01:43:46 +00:00
Brian Webb
bf5ef5bd00 RFM22B/RM: Added GPIO debugging to revomini to test rfm22b. Fixed (apparently) the reset issues with the rfm22b frequency hopping. Periodic frequency hopping is working pretty well now. 2013-03-09 01:06:42 +00:00
Brian Webb
31a3a66656 Mostly working periodic (as opposed to per message) channel hopping. This version should have less risk of getting hopelessly out of sync, but currently drops some packets. The dropped packets are likely around the channel hops. 2013-03-03 21:08:17 -07:00
Alessio Morale
2f3493f4b8 OP848 Fixes typos on header files comments 2013-03-03 21:45:29 +01:00
Alessio Morale
4791f690ad OP-848 Move the handling of the UAVO configuration outside of the PiOS layer 
a configuration helper header has been added to eliminate a lot of boilerplate code in *pios_board.c
 2013-03-03 21:17:02 +01:00
Stacey Sheldon
842b275e13 logfs: fix bugs in handling full filesystem conditions 
This was caught by the logfs unit tests.
 2013-03-03 14:33:02 +01:00
Stacey Sheldon
b211840104 logfs: allow loading zero length files 
This was found by the logfs unit tests.

This may be useful if we want to use empty files as existence
flags in the future.  Doesn't make any sense for UAVOs but
is valid in the general sense of a filesystem.
 2013-03-03 14:33:02 +01:00
Stacey Sheldon
b6eeb59b26 flash: verify JEDEC ID during flash init 
Verify that the flash component on the board matches exactly
what we're expecting.  This is a simple way to verify that we
are communicating properly with the JEDEC flash chip.

Conflicts:
	flight/targets/board_hw_defs/freedom/board_hw_defs.c
	flight/targets/board_hw_defs/quanton/board_hw_defs.c
 2013-03-03 14:33:02 +01:00
Stacey Sheldon
17b8696261 flash: use uintptr_t to hold opaque pointers 
When storing an opaque pointer value in a uint, the
appropriate type is uintptr_t which is guaranteed to
be wide enough to hold a pointer.

This is particularly important when the code can be
compiled in a sim or unit test environment which is
intended to run on a 64-bit machine.

Conflicts:
	flight/PiOS/Common/pios_flash_jedec.c
	flight/targets/DiscoveryF4/System/pios_board.c
	flight/targets/FlyingF4/System/pios_board.c
	flight/targets/Freedom/System/pios_board.c
	flight/targets/Quanton/System/pios_board.c
 2013-03-03 14:33:02 +01:00
Stacey Sheldon
dd5f4b949c logfs: use uintptr_t to hold opaque pointers 
When storing an opaque pointer value in a uint, the
appropriate type is uintptr_t which is guaranteed to
be wide enough to hold a pointer.

This is particularly important when the code can be
compiled in a sim or unit test environment which is
intended to run on a 64-bit machine.

Conflicts:
	flight/targets/DiscoveryF4/System/pios_board.c
	flight/targets/FlyingF4/System/pios_board.c
	flight/targets/Freedom/System/pios_board.c
	flight/targets/Quanton/System/pios_board.c
 2013-03-03 14:33:02 +01:00
Alessio Morale
cc2d5f8eae Fixes for missing openpilot.h include, previously coming from flashfs_objlist 2013-03-03 14:33:02 +01:00
Stacey Sheldon
7726b9e2a9 logfs: use f3-safe slot and arena states for all chips 
Filesystem magic value has been updated to deal with the
format change.

Conflicts:
	flight/targets/board_hw_defs/discoveryf4/board_hw_defs.c
	flight/targets/board_hw_defs/flyingf4/board_hw_defs.c
	flight/targets/board_hw_defs/freedom/board_hw_defs.c
	flight/targets/board_hw_defs/quanton/board_hw_defs.c
 2013-03-03 14:33:01 +01:00
lilvinz
d611207789 pios_flashfs_logfs: moved modified ARENA and SLOT enums to an F3 branch 
also added a detailed comment
 2013-03-03 14:33:01 +01:00
lilvinz
b242f8b88c pios_flashfs: adapted flashfs to work on f3 2013-03-03 14:33:01 +01:00
Stacey Sheldon
81059c41f7 flashfs: remove API dependency on uavobjmanager types 
The flashfs layer is now entirely decoupled from the UAVO
data types.  All UAVO related calls are now properly
contained within uavobjectmanager.c.

This will make the flashfs layer more portable as well as
more testable in a standalone environment.  Eventually,
this layer could be used to store arbitrary files.

Also fixed all of the doxygen headers for the flashfs API.
 2013-03-03 14:33:01 +01:00
Stacey Sheldon
d2a3f254bc stmflash: add flash driver for internal flash in STM32 2013-03-03 14:33:01 +01:00
Stacey Sheldon
d89a9b1b6c objlist: remove now unused objlist flash filesystem 
Conflicts:
	flight/PiOS/inc/pios_flashfs_objlist.h
 2013-03-03 14:33:01 +01:00
Stacey Sheldon
5ef0988137 logfs+flash: add log structured filesystem for PiOS 
A new flash driver abstraction is also provided to allow
for future support of other types of flash device under
the filesystem.

Conflicts:
	flight/PiOS/Common/pios_flash_jedec.c
 2013-03-03 14:33:01 +01:00
Stacey Sheldon
20921e48ca flashfs: define the API to the FLASHFS subsystem 2013-03-03 14:33:01 +01:00
Alessio Morale
5fdaccc1fa sim_posix: unified inc files with the rest of PiOS .h, some dir moves/cleanup, fixed some compilation issues. 2013-03-03 09:50:20 +01:00
Brian Webb
4743404c47 RFM22B: Some more reliability improvements for frequency hopping. 2013-03-01 07:55:00 -07:00
Brian Webb
4e92bed1df Added back missing PIOS_COM_TELEM_USB (needed by the bootloader). 2013-02-25 01:44:48 +00:00
Brian Webb
2f0498d8ad Was a little aggressive on the rfm22b device structure cleanup, and removed the PPM receiver elements. 2013-02-25 00:30:32 +00:00
Brian Webb
d9baa372c7 Added frequency hopping to the RFM22B driver. Currently it defaults to 128 channels between 430 and 440 MHz. 2013-02-24 23:05:51 +00:00
Brian Webb
1af58e510e Added optional output of GCSReceiver from the OPLink to the FC. This will happen automatically if a PPM packet is receive, and PPM output is disabled. 2013-02-18 02:55:58 +00:00
Brian Webb
cf7c929030 Added the ability to store bindings and configuration paramaters for multiple (up to 8) modems from an OPLink controller modem. 2013-02-18 01:49:13 +00:00
Alessio Morale
3986f93e68 op-848 Splitted sample rate divider configuration for dlp and non_dlp settings (1kHz vs 8kHz sample rate). 
Minor clean up, used constants in place of some hardcoded values
 2013-02-17 12:20:25 +01:00
Brian Webb
46baec52ef Merge remote-tracking branch 'origin/next' into brian/rfm22_multibind 2013-02-17 01:21:12 +00:00
Alessio Morale
e27a07631e op-848 MPU6000 support user configurabe accel/gyro scales and filter bandwidth. 
board definitions can override any of this settings for special applications.
Also include cleanup from "magic numbers" and fix for inverted ranges
 2013-02-17 02:02:12 +01:00
Oleg Semyonov
aea1b4b544 Merge remote-tracking branch 'origin/os/OP-775_arm-dsplib' into next 2013-02-16 16:08:31 +02:00
Brian Webb
57b4d8c720 RFM22: Added support for binding to multiple remove OPLinks. 2013-02-08 01:56:22 +00:00
Brian Webb
e50e645e7b Merge remote-tracking branch 'origin/next' into brian/oplink_ppm_out 2013-02-07 13:39:21 +00:00
Oleg Semyonov
97436166e3 Merge remote-tracking branch 'origin/next' into os/OP-775_arm-dsplib 2013-02-06 12:55:14 +02:00
Brian Webb
ca6aa9fcea Reformatted PPM output code to match coding standards. 2013-02-02 01:53:39 +00:00
Brian Webb
18c592a37a Reformatted PPM output code to match coding standards. 2013-02-02 01:50:02 +00:00
Alessio Morale
153db89663 OP-815 changed PIOS_WDG_RegisterFlag to reset the WDG to prevent timeouts during module initialization 2013-02-01 20:05:44 +01:00
Brian Webb
a4faa22c4b Merge remote-tracking branch 'origin/brian/rfm22_autoconf' into next 
Conflicts:
	ground/openpilotgcs/src/plugins/config/configgadgetwidget.cpp
 2013-01-31 13:40:32 +00:00
Alessio Morale
f293298118 Merge remote-tracking branch 'origin/revo-fixes' into amorale/revo-merge 
Conflicts:
	flight/Modules/ManualControl/manualcontrol.c
	make/scripts/version-info.py
	package/Makefile.linux
 2013-01-19 20:23:48 +01:00
Alessio Morale
b317415556 OP-788 reenable transaction lock for pios_jedec_flash.c 2013-01-14 01:31:07 +01:00
Alessio Morale
fbced18aab Added missing test for TIM_IT_Update, cleanup 2013-01-05 18:52:15 +01:00
Alessio Morale
403a27de9e OP-783: Fix missing F4 timer handlers for TIM13 and TIM14 and check source for shared vectors 2013-01-05 18:52:02 +01:00
Brian Webb
be444db7f8 Added PPM output to OPLink firmware 2013-01-04 06:51:27 -07:00
Brian Webb
7d86ddc6f7 Added 8 channel PPM output to PIOS. 2013-01-04 06:50:24 -07:00
Oleg Semyonov
95f16e25c4 [OP-775] Provide rules to build DSP library 2012-12-30 21:53:35 +02:00
Oleg Semyonov
89cb49733e [OP-775] Use new core_cm3.h 2012-12-30 21:53:34 +02:00
Oleg Semyonov
aee2613384 [OP-775] Import CMSIS2 ARM DSP_Lib sources (imported by Alessio) 2012-12-30 21:53:29 +02:00
Brian Webb
9f3d7a24f8 Merge branch 'revo-fixes' of ssh://git.openpilot.org/OpenPilot into brian/rfm22_autoconf 
Conflicts:
	flight/RevoMini/Makefile
 2012-12-30 07:59:09 -07:00
Alessio Morale
8a832fa8f6 OP-780 fix for comments 2012-12-30 15:01:25 +01:00
Alessio Morale
657701348c OP-782 fixed duplicated entry for adc input. 2012-12-30 12:26:28 +01:00
lilvinz
6daed46ecc pios_i2c: fixed a race condition with wrong bus locking when using FreeRTOS 
When more than one task is concurrently trying to access
the same i2c bus and a timeout occurs on bus lock the
transfer would just continue and blow up the pios_i2c
driver. This has been fixed.
 2012-12-29 17:20:50 +01:00
Corvus Corax
37df2bcbf4 OP-742: Merge branch 'corvuscorax/airspeed_fixes' into revo-fixes 
Conflicts:
	flight/RevoMini/Makefile
 2012-12-29 12:09:58 +01:00
Brian Webb
9225debdc1 Added initialization of the ECC, which was removed with the removal of the packet handler. Removed a couple of test functions from RadioComBridge module. Turned on watchdog timers in RadioComBridge (and RFM22B driver). 2012-12-17 19:33:42 -07:00
Brian Webb
c4c58331e5 RM: Now doesn't crash when the radio is disabled. 2012-12-16 09:16:19 -07:00
Brian Webb
e0acb41379 Removed some unintended changes to RevoMini. 2012-12-15 10:35:51 -07:00
Brian Webb
43f6b4150f RFM22: Don't send status until the link is connected. 2012-12-15 09:56:27 -07:00
Brian Webb
3a1803b7a1 Added RFM22B (OPLink) receiver. 2012-12-13 21:07:19 -07:00
Brian Webb
6e929d7a92 Fixed configuration of PPM input. 2012-12-12 20:27:08 -07:00
Brian Webb
90e0746ade RFM22B: Changed default (initial) air baud rate to 9600. Also some code cleanup. 2012-12-11 19:23:59 -07:00
Brian Webb
1d7e4e0fc2 Reduced length of transmit window period to 8 ms from 16 ms. 2012-12-11 17:44:22 -07:00
Brian Webb
8ead1200b9 RFM22B: Added timing synchronization on transmit to try to eliminate both sides transmitting at the same time. This now achieves virtually 0 re-transmissions for close range transmission while transmitting both full telemety and PPM at 64k. 2012-12-11 17:44:20 -07:00
Brian Webb
7f6a718354 RFM22B: Added optional debug signals on the telemetry port of the PipX. Also fixed a couple of bugs that were causing excessive re-transmissions (found using the debug signals). 2012-12-11 17:44:19 -07:00
Brian Webb
fecc23eb49 RFM22B/OPLink: Auto-configuration of remote com port now working. 2012-12-11 17:44:17 -07:00
Brian Webb
6ffe518509 RFM22B: Improved link stability, and added tracking of error encountered in the processes of transmitting and receiving. 2012-12-11 17:44:15 -07:00
Brian Webb
4cb311538a RFM22B: Improved reliability, especially with reconnection after a timeout, although there is still too many resent packets. 2012-12-11 17:44:14 -07:00
Brian Webb
7a930807aa RM: Fixed initialization of the debug console. 2012-12-11 17:44:12 -07:00
Brian Webb
6ed9b63da9 RFM22B: Changing configuration parameters over-the-air working. Added tracking of Tx/Rx sequence number. Still seeing too many resent packets. 2012-12-11 17:44:11 -07:00
Brian Webb
0dce12e984 RFM22B: Finised handshacking on ACK and changed the link quality metric to use resent packets rather than missed packets. 2012-12-11 17:44:09 -07:00
Brian Webb
7aaa02268f RFM22B: Added TX Resent to OPLink status. Also removed the need for the packet queue. 2012-12-11 17:44:08 -07:00
Brian Webb
fa5f7a8fdd RFM22B: All packets are now ACKed, and added a formal connection request / accept that will be used or auto-configuring the remote modem. 2012-12-11 17:44:06 -07:00
Brian Webb
98026966f7 RFM22B: Added PPM packets to rfm22 driver. 2012-12-11 17:44:04 -07:00
Brian Webb
04da5d2377 USB/COM/RFM22B: Added a standard com callback to test for link availability. This replaces the PIOS_USB_CheckAvailable function with a generic PIOS_COM_Available function. This is now used by the RFM22B com driver to test if a good link is up. This was originally written by James, and Brian merged it into the latest RFM22B branch. 2012-12-11 17:44:03 -07:00
Brian Webb
e36bd678e1 RFM22B: Allow a receive to happen between transmitts. 2012-12-11 17:44:01 -07:00
Brian Webb
9f43e1151c RFM22B: Fixed status reporting and connection status for OPLink. 2012-12-11 17:44:00 -07:00
Brian Webb
bd42083376 RFM22B: Changed the way the frequencies and power settings are set for the rfm22b device. 2012-12-11 17:43:55 -07:00
Brian Webb
dae382564a RFM22B/RM: Added rfm22b com device, moved remaining functionality in the radio module to the rfm22 driver, and simplified configuration of the PipX/OPLink. The radio device now presents itself completely as a com device, both in RadioComBridge (OPLink devices) and Telemetry (RM). Also change the PipXStatus and PipXSettings UAVOs to OPLinkStatus/OPLinkSettings. 2012-12-11 17:43:53 -07:00
Brian Webb
4b90f81f6f RFM22B: Modified the method of tracking RX errors, and now reporting Good, Corrected, Error, and Missed packets to the GCS. Also removed some less useful fields from the PipXStatus. 2012-12-11 17:43:49 -07:00
a*morale
2d83e8a779 Fixes for SBUS support on RM2. 
Note: it needs the RTC timing to be fixed as it seems that it runs at half its nominal 625Hz value
 2012-11-23 19:41:23 +01:00
Stacey Sheldon
e5c54cca00 freertos: change default alignment to 4-byte from 8-byte 
There shouldn't be any reason to need 8-byte alignment on the
F1 platform.  This allows better packing of all malloc'd data.

Reducing this below 4-byte alignment is not recommended and will
likely result in misaligned pointers being passed to peripherals.

RAM savings is another 300 bytes.
 2012-11-11 22:16:00 -05:00
Corvus Corax
8dd5d5a68b type fix in header file 2012-11-08 11:12:05 +01:00
Corvus Corax
b09027afe5 Completely refactored airspeed module, now a pure sensor input module without any complex sensor fusion features -- changed driver for mpxv analog airspeed to be more versatile 2012-11-08 01:31:21 +01:00
Stacey Sheldon
5aa3777078 Merge remote-tracking branch 'op-public/next' into revo-next 
Conflicts:
	flight/Modules/Telemetry/telemetry.c
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
 2012-10-30 00:41:35 -04:00
Stacey Sheldon
2119067722 Merge remote-tracking branch 'op-revo/james/revo' into revo-next 
Conflicts:
	Makefile
	flight/Modules/Attitude/revolution/attitude.c
	flight/Modules/Battery/battery.c
	flight/Modules/FixedWingPathFollower/fixedwingpathfollower.c
	flight/Modules/GPS/GPS.c
	flight/Modules/ManualControl/inc/manualcontrol.h
	flight/Modules/ManualControl/manualcontrol.c
	flight/Modules/OveroSync/overosync.c
	flight/Modules/PathPlanner/inc/pathplanner.h
	flight/Modules/PathPlanner/pathplanner.c
	flight/Modules/Sensors/sensors.c
	flight/Modules/VtolPathFollower/vtolpathfollower.c
	flight/PiOS/Boards/STM32F4xx_Revolution.h
	flight/PiOS/Boards/pios_board.h
	flight/PiOS/STM32F4xx/library.mk
	flight/PiOS/inc/pios_hmc5883.h
	flight/PiOS/inc/pios_l3gd20.h
	flight/PiOS/inc/pios_rfm22b_priv.h
	flight/Revolution/Makefile
	flight/Revolution/Makefile.osx
	flight/Revolution/System/inc/pios_config.h
	flight/Revolution/UAVObjects.inc
	ground/openpilotgcs/src/libs/utils/coordinateconversions.cpp
	ground/openpilotgcs/src/libs/utils/homelocationutil.cpp
	ground/openpilotgcs/src/libs/utils/homelocationutil.h
	ground/openpilotgcs/src/plugins/config/configrevowidget.cpp
	ground/openpilotgcs/src/plugins/hitlnew/il2simulator.cpp
	ground/openpilotgcs/src/plugins/opmap/opmapgadgetwidget.cpp
	ground/openpilotgcs/src/plugins/plugins.pro
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
	package/Makefile
	shared/uavobjectdefinition/fixedwingpathfollowersettings.xml
	shared/uavobjectdefinition/fixedwingpathfollowerstatus.xml
	shared/uavobjectdefinition/flightstatus.xml
	shared/uavobjectdefinition/hwsettings.xml
	shared/uavobjectdefinition/manualcontrolsettings.xml
	shared/uavobjectdefinition/pathdesired.xml
	shared/uavobjectdefinition/vtolpathfollowersettings.xml
	shared/uavobjectdefinition/waypoint.xml
 2012-10-30 00:08:43 -04:00
lilvinz
3db04ea174 pios_jedec: fixed usage of uninitialized memory 
When reading the jedec device id the code only transfered one byte via spi leaving
the expected input buffer uninitialized. This may lead to the problem that flash
initialization fails because the expected input may be whatever the stack was set
when entering the function. The impact of the bug is somewhat limited tough as the
initialization usually takes place before starting up the rtos and thus is pretty
deterministic. So if the code passed init while testing it should pass init in
production as well.
 2012-10-28 14:34:20 +01:00
Stacey Sheldon
127ca1e7e1 Merge remote-tracking branch 'op-public/next' into revo-next 
Conflicts:
	ground/openpilotgcs/src/plugins/hitl/plugin.pro
	ground/openpilotgcs/src/plugins/hitlnew/fgsimulator.cpp
	ground/openpilotgcs/src/plugins/hitlnew/hitlconfiguration.cpp
	ground/openpilotgcs/src/plugins/hitlnew/hitloptionspage.cpp
	ground/openpilotgcs/src/plugins/hitlnew/hitloptionspage.ui
	ground/openpilotgcs/src/plugins/hitlnew/il2simulator.cpp
	ground/openpilotgcs/src/plugins/hitlnew/simulator.cpp
	ground/openpilotgcs/src/plugins/hitlnew/simulator.h
	ground/openpilotgcs/src/plugins/hitlnew/xplanesimulator.cpp
	ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
 2012-10-20 13:56:18 -04:00
Stacey Sheldon
6088c05946 console: add support for serial debug consoles 
Serial ports now have a new HW setting called DebugConsole
which can be used to dump internal state to a serial port
for debug.

To enable this feature, you need to:
 - make fw_coptercontrol_clean
 - make fw_coptercontrol ENABLE_DEBUG_CONSOLE=YES
 - configure one of the serial ports as DebugConsole in the GCS
 - save settings
 - power-cycle your board

Things to note:
 - The console is at 57600,8N1.
 - This is not currently configurable via the GCS.
 - You can only have a single console enabled at a time.
 2012-10-11 00:22:07 -04:00
James Cotton
aad1c3bd32 FreeRTOS: Make F1 targets use the FreeRTOS common code from PiOS/Common 2012-10-09 10:08:06 -05:00
James Cotton
17f3c4d4e0 Re-add our code for accessing the run time information in freertos. 2012-10-09 09:57:57 -05:00
James Cotton
72c84fc49c Upgrade to FreeRTOS 7.2.0 2012-10-09 09:48:02 -05:00
sambas
9212bbeb20 DSMx bindmode delay was too long, satellite binding works again. 2012-10-07 12:09:42 +11:00
Brian Webb
9ea572f4f7 RFM22B: Fixed the signedness of the return value of the RSSI function. 2012-10-04 21:23:44 -07:00
Brian Webb
5724fa083c RFM22B: Added link quality calculation based on number of dropped packets. Also added packet error correction, which apparently wasn't being done before. 2012-10-04 21:11:40 -07:00
Brian Webb
9b9d0c0d1e RFM22B: Added back configuration of the RF Power and RF Datarate. Also added setting of the destination ID in the rfm22b driver. 2012-10-03 20:03:35 -07:00
Brian Webb
3cdb9df05f RFM22B: Removed setting register 0x58 in the rfm22_setDatarate call, which was breaking all data rates < 100000 bps. Also temporatily fixed the datarate at 64kbps. 2012-10-02 20:59:43 -07:00
Brian Webb
a8590045a8 RFM22B: Moved radio status reporting from the radio module into the rfm22b driver task. 2012-10-02 19:52:21 -07:00
a*morale
227aa98ebc Added TIM12 to PIOS_TIM 2012-09-30 20:32:03 +02:00