Steve Evans
7c7b19ff2d
OP-1289 Merge OP-1803 Only create local telemetry queues/tasks if needed
2015-04-11 10:10:04 +01:00
Steve Evans
73aeb5d653
OP-1803 Report link quality for OPLink
2015-04-04 22:02:54 +01:00
Steve Evans
b93d9e178e
OP-1803 Max signal quality is 100%
2015-04-04 14:50:08 +01:00
Steve Evans
b7122008c7
OP-1803 Uncrustify
2015-04-03 18:30:36 +01:00
Steve Evans
b5a3ad3708
OP-1803 Use float to avoid rounding error on signal quality
2015-04-03 18:01:04 +01:00
Steve Evans
32b3f0d55d
OP-1803 Remove old header reference
2015-04-03 15:45:00 +01:00
Steve Evans
f9f0e1657c
OP-1803 Add good frame count option for debug
2015-04-03 15:29:24 +01:00
Steve Evans
2843715432
Merge branch 'steve/OP-1289_two_telemetry_streams' into steve/OP-1803_s.bus_dropped_frames
...
Update with taskinfo update
2015-04-03 12:46:12 +01:00
Steve Evans
91e03a1541
OP-1289 Adding tracking of new RadioTx task
2015-04-03 12:37:37 +01:00
Steve Evans
8276aa3a66
OP-1803 Monitor signal quality when armed too
2015-04-03 09:47:07 +01:00
Steve Evans
2e5ecd2dce
OP-1803 S.Bus signal quality monitoring
2015-04-02 21:41:40 +01:00
Steve Evans
a0f180d393
OP-1803 Initial commit
2015-04-02 19:09:58 +01:00
Steve Evans
ba217a3d7d
OP-1289 Revise naming of mainQueue to queue
...
As per review comments
+review OPReview-985
2015-03-17 20:52:08 +00:00
Steve Evans
45005a167f
OP-1289 Revise naming of the two channels of data and associated functions
...
The code now uses a "local" prefix to refer to the telemetry channel
associated with a port on the FC and a "radio" prefix to refer to the
telemetry channel associated with the OPLink/USB.
+review OPReview-985
2015-03-15 23:11:42 +00:00
Steve Evans
12d3bdbe8a
OP-1289 add per channel port selection routines
...
+review OPReview-985
2015-03-15 18:19:19 +00:00
Steve Evans
5952cfa275
Year is 2015
2015-03-15 00:48:36 +00:00
Steve Evans
6bb732fb02
OP-1289 Need Revo to send two telemetry streams for OSD and GCS
2015-03-14 23:58:18 +00:00
abeck70
dc3610f4e8
OP-1764 uncrustify
2015-03-09 22:31:40 +11:00
abeck70
993481c11e
OP-1764 added flight side sanity checks
2015-03-09 21:31:42 +11:00
Alessio Morale
a01cab1e72
OP-1743 - Fix attitude issue on CC3D
2015-02-24 22:39:34 +01:00
Alessio Morale
bcbb1d08e4
Merge branch 'amorale/OP-1743_fix_cc_target' into next
2015-02-24 22:26:10 +01:00
Alessio Morale
81b9d2e379
OP-1743 - Raise manualcontrol stack
2015-02-24 22:03:18 +01:00
Alessio Morale
a30f115567
OP-1743 - Fix uninitialized objects usage
2015-02-24 22:02:56 +01:00
Alessio Morale
84465ae0cb
OP-1743 - Fix a very ugly error in attitude(cc/cc3d)
2015-02-24 22:02:25 +01:00
abeck70
c5275fc89b
OP-1744 fix crash on revo with ubx config
2015-02-24 22:40:49 +11:00
abeck70
0cd7e20425
Merge branch 'amorale/OP-1685_various_fixes' into test-oneshot
2015-02-23 16:47:12 +11:00
abeck70
57e0a8baf5
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1721
...
Conflicts:
flight/modules/Sensors/sensors.c
2015-02-23 14:40:55 +11:00
Alessio Morale
ad42ca7f16
Merge remote-tracking branch 'origin/amorale/OP-1658_sensor_overhaul_next' into next
2015-02-22 16:28:04 +01:00
Alessio Morale
1f5f5747f7
OP-1685 - Fix glitches on output settings save. It was due to wrong check for bankmode changes.
2015-02-22 14:21:23 +01:00
Alessio Morale
60abae8a8b
OP-1685 - Rename PIN6 to PIN8 (that's Input6)
2015-02-22 13:25:07 +01:00
Alessio Morale
2a90e86e58
OP-1685 - Try to avoid unneded updates to prevent output glitches
2015-02-22 13:12:00 +01:00
Alessio Morale
0cd545f5e4
OP-1658 - Fix ms5611 units
2015-02-20 05:47:31 +01:00
abeck70
b61a76eeae
Merge branch 'next' into abeck/OP-1721
2015-02-19 12:19:28 +11:00
abeck70
bc94fbc2df
OP-1670 uncrustify sanitycheck
2015-02-19 08:27:10 +11:00
abeck70
d157b1f553
OP1670:Sanitycheck acro/rate+cruisecontrol
2015-02-19 08:25:07 +11:00
Laurent Lalanne
26ec24f5b1
Merge remote-tracking branch 'origin/laurent/OP-1601_CC3D_Ubx_only' into next
2015-02-18 02:58:19 +01:00
Laurent Lalanne
25c8d43db3
Merge remote-tracking branch 'origin/laurent/OP-1635_Remove_QuadH_config_tab' into next
2015-02-18 02:56:23 +01:00
Alessio Morale
39513f0533
OP-1685 - Rename OneShot to PWMSync to avoid confusion
2015-02-17 23:20:07 +01:00
Alessio Morale
fbdd88c161
OP-1685 - handle servo outputs with PPM_Pin6, sanity check for flexi_ppm
2015-02-15 19:08:49 +01:00
abeck70
53482be09c
OP-1721 C++ and ARM tools
...
Enable revo C++ support:
1. Set USE_CXX to enable compliation and linkage of C++ source code
2. Disables rtti and exceptions
3. operator new and delete call pios malloc/free
4. Static constructor invocation supported
5. Additional methods, compile options, and need to have main as a cpp to solve various link issues when using static constructors but to avoid adding unnecessary libs.
6. Upgrade arm tools
2015-02-13 12:56:04 +11:00
Alessio Morale
1ad040229c
OP-1685 - implement PPM on pin 6
2015-02-12 00:00:17 +01:00
Alessio Morale
096a321181
OP-1685 - calls sanitychecks after updates to actuatorsettings, update board sanitycheck rules
2015-02-11 23:59:23 +01:00
Alessio Morale
f3fe45750d
OP-1683 - Remove dead code
2015-02-11 22:33:58 +01:00
Alessio Morale
fd299b559a
OP-1685 - Add custom sanity check hook to test OneShot availability
2015-02-11 22:33:57 +01:00
Alessio Morale
26893554c0
OP-1704 - Change Hook alarm level to Critical to prevent arming and allow them to be disabled with DisableSanityChecks
2015-02-11 22:33:57 +01:00
Alessio Morale
a4da83a1be
OP-1685 - Add OneShot compatible configurations
2015-02-11 22:33:57 +01:00
Alessio Morale
f290d6d89d
OP-1685 - Implement OneShot on F1
2015-02-11 22:33:57 +01:00
Laurent Lalanne
6da3c99af2
OP-1635 Remove QuadH in config tab - AirframeType
2015-02-10 22:48:43 +01:00
Laurent Lalanne
cd2ad35ae0
OP-1601 Add command line options for fw_coptercontrol : GCSRECEIVER=YES and DIAG_TASKS=YES
2015-02-08 22:37:24 +01:00
Alessio Morale
4245db7b31
Merge remote-tracking branch 'origin/amorale/OP-1704_sanity_check_hooks' into next
2015-02-08 19:59:57 +01:00
