James Cotton
c7034ef8a6
IMU3000: Fix a constant that made the sampling rate 1kh instead of 8 internaly.
...
No downsample that (in IMU3000) by 8 to get gyros at 1khz. Well about 256 Hz
nyquist and shouldn't cause substantial issues for EKF.
2011-08-18 13:01:51 -05:00
James Cotton
bdb9dc0a54
BMA180: Use DMA for getting the accels and use callback to push it onto the
...
stack.
2011-08-18 12:51:22 -05:00
James Cotton
3b6ffc8afa
PiSO SPI: Implement a poor mans semaphore for non-freertos systems.
2011-08-18 12:51:00 -05:00
James Cotton
294e0cbdff
IMU3000: Change IMU3000 api right now so it only reads one element from the
...
fifo but swaps the endian appropriately.
2011-08-18 11:03:56 -05:00
Corvus Corax
34df188963
Merge remote branch 'origin/next' into OP-536_CorvusCorax_ObjectOrientedFirmwareUAVTalk
2011-08-18 17:17:06 +02:00
Oleg Semyonov
7791db9820
Milestones: add alconaft43's milestones (same video, two pilots)
2011-08-17 17:58:39 +03:00
Oleg Semyonov
b8d47381d2
Milestones: add Maximus43's flybared heli inverted flight, funnel, loop
...
As always, there is the rule: no video - no milestone :-)
2011-08-17 17:47:17 +03:00
James Cotton
11ac0707da
BMA180: Reset BMA180 chip at reconfiguration.
2011-08-17 06:49:56 -05:00
James Cotton
29026db5d5
Refactor the INS code out a bit but still a mess.
2011-08-17 06:15:14 -05:00
Corvus Corax
6fe495c088
Merge remote branch 'origin/next' into OP-536_CorvusCorax_ObjectOrientedFirmwareUAVTalk
...
Conflicts:
flight/Modules/Telemetry/telemetry.c
2011-08-17 08:30:32 +02:00
Oleg Semyonov
2020e336d6
OP-290: allow GCS tabs to shrink (by eliding the text), less limit min window width
2011-08-16 20:58:39 +03:00
James Cotton
c0ead372e1
INS: Change LED flashing to indicate connected.
2011-08-16 11:30:38 -05:00
James Cotton
71a1cdff62
PiOS SPI: For F2 need to have the same receive and transmit length when using
...
CRC. This wasn't the case on F1. With CRC the last byte of the buffer passed
to PIOS_SPI_TransferBlock is NOT USED. This is the case on both F1 and F2.
Also need to DeInit DMA before enabling or it doesn't enable successfully.
Finally added a timeout which sets a fail on the pios spi transfer in the case
that either of the dma channels fails to enable.
2011-08-16 11:29:15 -05:00
James Cotton
bcca705750
Disable beta hardware bmp085 driver until it's updated. Not necessary anyway
...
since on the INS.
2011-08-16 08:55:02 -05:00
James Cotton
33e61b4405
OP-557: Make the tools erase menu item attempt to perform a full format on the
...
flash chip first, then fall back to erasing settings via the EraseSettings
object persistence. The later only removes UAVO instances that the firmware is
current aware of, so can create issues when jumping between versions.
2011-08-15 11:37:00 -05:00
James Cotton
35eef66bfe
OP-557: Add a UAVO access method to erase the entire flash chip. Normally not
...
needed by users because if too much changes I change the FS magic and trigger a
wipe.
Possibly the erase should require a particular "magic" object id value to
execute? This would make it harder to do manually through UAVOs though.
2011-08-15 10:33:27 -05:00
James Cotton
db9c73db45
Get SPI closer to working. The flags in the pios_config should match the
...
stream number, not channel number. Also DeInit DMA section in the init process
which makes debugging and init behavior more reliable.
2011-08-15 04:47:53 -05:00
James Cotton
86b652bbab
Merge branch 'next' into camera_stabilization
2011-08-14 18:07:57 -05:00
Oleg Semyonov
2f7f920ef3
gcs: (uploader plugin) few firmware info string and icon changes
...
Also it looks like the date check clause doesn't work, needs to be checked.
2011-08-14 17:25:52 +03:00
Oleg Semyonov
ba58ec7e08
gcs: (uploader plugin) replace red warning icon with less serious yellow triangle
2011-08-14 17:25:50 +03:00
Corvus Corax
b75653a226
PiOS.posix: small corrections and bugfixes to make pios_com_udp work correctly. Telemetry works now.
2011-08-14 14:21:54 +02:00
Corvus Corax
5b240a2675
PiOS.posix: port pios_udp and pios_com to "next"
2011-08-14 14:21:54 +02:00
Corvus Corax
8a47ade16b
flight/Libraries/fifo_buffer: Use platform independent <stdint.h> instead of "stm32xxx.h" to get definition of intX_t types
2011-08-14 14:21:54 +02:00
James Cotton
c5ed82086d
Configure the interrupt information before enabling. Still looping in IRQ so
...
configuration needs work.
2011-08-14 02:00:52 -05:00
James Cotton
02d5e27e93
Got SPI IRQ from mainboard firing
2011-08-14 01:44:44 -05:00
James Cotton
80c2d45d93
Fix the BMP085 interrupt handler and get it producing data. Driver needs some
...
work to abstract away the actual calculation of altitude from pressure and
temperature.
2011-08-13 20:49:07 -05:00
James Cotton
f766ba47aa
Increase the size of the eventdispatcher task and lower the maximum queue size.
2011-08-13 19:21:58 -05:00
James Cotton
a2b76adc33
Attitude: Do not start attitude estimation until accel data appears. This
...
fixes the NaN when AttitudeSettings not available.
2011-08-13 18:53:42 -05:00
James Cotton
62f51fc92d
Some improvements to the HMC5883 driver. Still getting funny values but I
...
suspect the chip at this point.
2011-08-13 11:20:32 -05:00
James Cotton
13e5f4123a
Reading gyro registers directly working.
2011-08-13 08:33:46 -05:00
James Cotton
e7990f5d43
Got a hint of some data with this code :)
2011-08-13 07:13:43 -05:00
James Cotton
f82e5dde33
Fix the EXTI IRQ handlers
2011-08-13 07:13:21 -05:00
James Cotton
e1f7a5003d
Fix up SPI DMA streams
2011-08-13 04:54:19 -05:00
James Cotton
8929e2f359
Update some of the DMA settings
2011-08-13 02:46:13 -05:00
James Cotton
77cca9ba30
Move EXTI handlers into other drivers
2011-08-13 01:29:17 -05:00
James Cotton
6d018c046e
Get BMA180 working. Need to move exti stuff into it until pios_exti
...
implemented properly
2011-08-13 01:10:33 -05:00
James Cotton
5619e33292
Bootloader now jumps to functioning code for INS. Consistent with AHRS code.
2011-08-12 22:52:47 -05:00
James Cotton
e9ca5c15f9
UPGRADE OPENOCD!!!!
...
To support the F2 and F1 you must upgrade to OpenOCD 5.0
2011-08-12 21:39:29 -05:00
James Cotton
6529b8360f
Trying to get linker system working for INS
2011-08-12 21:28:02 -05:00
dankers
69f8aac967
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2011-08-13 06:12:08 +10:00
dankers
65cb05e212
hhrhhr's fix for modelview gimbal lock, thank you!!
2011-08-13 06:08:07 +10:00
James Cotton
e993fae463
Fix bootloader
2011-08-12 04:32:02 -05:00
James Cotton
e57f774bb8
F2 INS compiles now
2011-08-12 04:30:14 -05:00
James Cotton
1d1f351233
Pios Delay: Add function for measuring time difference between two cycle counts
2011-08-12 04:29:53 -05:00
James Cotton
b3b4fcd007
Fix linker script and get rid of dead code
2011-08-12 03:44:55 -05:00
James Cotton
f247112090
PiOS F2: Move IMU3000 to device dependent :(. Now they all are. Need to
...
abstract as much as possible out since init is almost identicalc and protocol
COULD be device independent.
2011-08-12 03:38:45 -05:00
James Cotton
8c1dd7b929
Make BMP085 driver device dependent and update to new driver style.
2011-08-12 03:38:45 -05:00
James Cotton
9d76efa2aa
Move BMA180 driver to common architecture style.
2011-08-12 03:38:45 -05:00
James Cotton
1dc08e5cf7
F2 PiOS: Small fix to hmc5883 driver
2011-08-12 03:38:44 -05:00
James Cotton
ba413d5dad
F2 StdPeriph: Make the StdPeriph take in config parameters as const.
...
Unfortunately they don't do this upstream :(
2011-08-12 03:38:40 -05:00
